u-boot/board/intel/Kconfig
Park, Aiden d8f6db4768 board: intel: Add new slimbootloader board
Add slimbootloader board to run U-boot as a Slim Bootloader payload
- Add new board/intel/slimbootloader directory with minimum codes
- Add slimbootloader configuration files
- Add doc/board/intel/slimbootloader.rst

Signed-off-by: Aiden Park <aiden.park@intel.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
[bmeng: add slimbootloader board MAINTAINERS file]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-08-09 22:24:02 +08:00

100 lines
3.8 KiB
Text

# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
if VENDOR_INTEL
choice
prompt "Mainboard model"
optional
config TARGET_BAYLEYBAY
bool "Bayley Bay"
help
This is the Intel Bayley Bay Customer Reference Board. It contains an
Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM
4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
PCIe and some other sensor interfaces.
config TARGET_CHERRYHILL
bool "Cherry Hill"
help
This is the Intel Cherry Hill Customer Reference Board. It is in a
mini-ITX form factor containing the Intel Braswell SoC, which has
a 64-bit quad-core, single-thread, Intel Atom processor, along with
serial console, 10/100/1000 Ethernet, SD-Card, USB 2/3, SATA, PCIe,
some GPIOs, one HDMI and two DP video out.
config TARGET_COUGARCANYON2
bool "Cougar Canyon 2"
help
This is the Intel Cougar Canyon 2 Customer Reference Board. It
is built on the Chief River platform with Intel Ivybridge Processor
and Panther Point chipset. The board has 4GB RAM, with some other
peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
config TARGET_CROWNBAY
bool "Crown Bay"
help
This is the Intel Crown Bay Customer Reference Board. It contains
the Intel Atom Processor E6xx populated on the COM Express module
with 1GB DDR2 soldered down memory and a carrier board with the
Intel Platform Controller Hub EG20T, other system components and
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
config TARGET_EDISON
bool "Edison"
help
This is the Intel Edison Compute Module. It contains a dual core Intel
Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB
eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers.
config TARGET_GALILEO
bool "Galileo"
help
This is the Intel Galileo board, which is the first in a family of
Arduino-certified development and prototyping boards based on Intel
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
single-core, single-thread, Intel Pentium processor instrunction set
architecture (ISA) compatible, operating at speeds up to 400Mhz,
along with 256MB DDR3 memory. It supports a wide range of industry
standard I/O interfaces, including a full-sized mini-PCIe slot,
one 100Mb Ethernet port, a microSD card slot, a USB host port and
a USB client port.
config TARGET_MINNOWMAX
bool "Minnowboard MAX"
help
This is the Intel Minnowboard MAX. It contains an Atom E3800
processor in a small form factor with Ethernet, micro-SD, USB 2,
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
It requires some binary blobs - see README.x86 for details.
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
by U-Boot matches that value.
config TARGET_SLIMBOOTLOADER
bool "slimbootloader"
help
This target is used for running U-Boot on top of Slim Bootloader
boot firmware as a payload. Slim Bootloader does memory initialization
and silicon initialization, and it passes necessary information in
HOB (Hand Off Block) to a payload. The payload consumes HOB data
which is generated by Slim Bootloader for its driver initialization.
Slim Bootloader consumes FSP and its HOB, but FSP HOB is cleared
Before launching a payload. Instead, Slim Bootloader generates its
HOB data such as memory info, serial port info and so on.
Refer to doc/board/intel/slimbootloader.rst for the details.
endchoice
source "board/intel/bayleybay/Kconfig"
source "board/intel/cherryhill/Kconfig"
source "board/intel/cougarcanyon2/Kconfig"
source "board/intel/crownbay/Kconfig"
source "board/intel/edison/Kconfig"
source "board/intel/galileo/Kconfig"
source "board/intel/minnowmax/Kconfig"
source "board/intel/slimbootloader/Kconfig"
endif