u-boot/include/configs/salvator-x.h
Alexandru Gagniuc da3b9e7fd6 Move PHY_MICREL and PHY_MICREL_KSZ90X1 to Kconfig
Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2017-08-07 15:22:29 -05:00

86 lines
2.2 KiB
C

/*
* include/configs/salvator-x.h
* This file is Salvator-X board configuration.
*
* Copyright (C) 2015 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SALVATOR_X_H
#define __SALVATOR_X_H
#undef DEBUG
#define CONFIG_RCAR_BOARD_STRING "Salvator-X"
#include "rcar-gen3-common.h"
/* SCIF */
#define CONFIG_CONS_SCIF2
#define CONFIG_CONS_INDEX 2
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_S3D4_CLK_FREQ
/* [A] Hyper Flash */
/* use to RPC(SPI Multi I/O Bus Controller) */
/* Ethernet RAVB */
#define CONFIG_NET_MULTI
#define CONFIG_BITBANGMII
#define CONFIG_BITBANGMII_MULTI
/* Board Clock */
/* XTAL_CLK : 33.33MHz */
#define RCAR_XTAL_CLK 33333333u
#define CONFIG_SYS_CLK_FREQ RCAR_XTAL_CLK
/* ch0to2 CPclk, ch3to11 S3D2_PEREclk, ch12to14 S3D2_RTclk */
/* CPclk 16.66MHz, S3D2 133.33MHz , S3D4 66.66MHz */
#define CONFIG_CP_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2)
#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 192 / 2)
#define CONFIG_S3D2_CLK_FREQ (266666666u/2)
#define CONFIG_S3D4_CLK_FREQ (266666666u/4)
/* Generic Timer Definitions (use in assembler source) */
#define COUNTER_FREQUENCY 0xFE502A /* 16.66MHz from CPclk */
/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE 0xF1010000
#define GICC_BASE 0xF1020000
/* i2c */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SH
#define CONFIG_SYS_I2C_SLAVE 0x60
#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 1
#define CONFIG_SYS_I2C_SH_SPEED0 400000
#define CONFIG_SH_I2C_DATA_HIGH 4
#define CONFIG_SH_I2C_DATA_LOW 5
#define CONFIG_SH_I2C_CLOCK 10000000
#define CONFIG_SYS_I2C_POWERIC_ADDR 0x30
/* USB */
#ifdef CONFIG_R8A7795
#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
#else
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#endif
/* SDHI */
#define CONFIG_SH_SDHI_FREQ 200000000
/* Environment in eMMC, at the end of 2nd "boot sector" */
#define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
#define CONFIG_SYS_MMC_ENV_DEV 1
#define CONFIG_SYS_MMC_ENV_PART 2
/* Module stop status bits */
/* MFIS, SCIF1 */
#define CONFIG_SMSTP2_ENA 0x00002040
/* SCIF2 */
#define CONFIG_SMSTP3_ENA 0x00000400
/* INTC-AP, IRQC */
#define CONFIG_SMSTP4_ENA 0x00000180
#endif /* __SALVATOR_X_H */