mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
85da558762
Commit f11513d997 ("net: phy: realtek: Add tx/rx delay config for
8211e") made the Realtek PHY driver honour the phy-mode DT property,
to set up the proper delay scheme for the RX and TX lines. A similar
change in the kernel revealed that those properties were mostly wrong.
The kernel DTs got updated over the last few months, but we were missing
out on the U-Boot version.
Just sync in the phy-mode properties from the mainline kernel,
v5.17-rc7, to avoid the breaking DT sync that late in the cycle.
This fixes Ethernet operation on the affected boards.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
120 lines
2.1 KiB
Text
120 lines
2.1 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
// Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
|
|
/dts-v1/;
|
|
#include "sun50i-h5.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "FriendlyARM NanoPi NEO 2";
|
|
compatible = "friendlyarm,nanopi-neo2", "allwinner,sun50i-h5";
|
|
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "nanopi:green:pwr";
|
|
gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
led-1 {
|
|
label = "nanopi:blue:status";
|
|
gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
reg_gmac_3v3: gmac-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "gmac-3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <100000>;
|
|
enable-active-high;
|
|
gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
reg_vcc3v3: vcc3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
reg_usb0_vbus: usb0-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb0-vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&ehci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ehci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&emac {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emac_rgmii_pins>;
|
|
phy-supply = <®_gmac_3v3>;
|
|
phy-handle = <&ext_rgmii_phy>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
};
|
|
|
|
&external_mdio {
|
|
ext_rgmii_phy: ethernet-phy@7 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <7>;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
vmmc-supply = <®_vcc3v3>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pa_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_otg {
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy {
|
|
/* USB Type-A port's VBUS is always on */
|
|
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
|
usb0_vbus-supply = <®_usb0_vbus>;
|
|
status = "okay";
|
|
};
|