u-boot/tools/Makefile
Tom Rini 1f6049e250 tools/mkimage: Make the path to the dtc binary that mkimage calls configurable
In some cases, such as FreeBSD, the path to an alternative dtc needs to
be used.  Rather than override the one given in the Makefile on the
command line, make this part of the build configuration.

Signed-off-by: Tom Rini <trini@konsulko.com>
2017-09-24 07:33:03 -04:00

296 lines
8.9 KiB
Makefile

#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
# Enable all the config-independent tools
ifneq ($(HOST_TOOLS_ALL),)
CONFIG_LCD_LOGO = y
CONFIG_CMD_LOADS = y
CONFIG_CMD_NET = y
CONFIG_XWAY_SWAP_BYTES = y
CONFIG_NETCONSOLE = y
CONFIG_SHA1_CHECK_UB_IMG = y
CONFIG_ARCH_SUNXI = y
endif
subdir-$(HOST_TOOLS_ALL) += easylogo
subdir-$(HOST_TOOLS_ALL) += gdb
# Merge all the different vars for envcrc into one
ENVCRC-$(CONFIG_ENV_IS_EMBEDDED) = y
ENVCRC-$(CONFIG_ENV_IS_IN_DATAFLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_EEPROM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_FLASH) = y
ENVCRC-$(CONFIG_ENV_IS_IN_ONENAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NAND) = y
ENVCRC-$(CONFIG_ENV_IS_IN_NVRAM) = y
ENVCRC-$(CONFIG_ENV_IS_IN_SPI_FLASH) = y
CONFIG_BUILD_ENVCRC ?= $(ENVCRC-y)
hostprogs-$(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER) += atmel_pmecc_params
hostprogs-$(CONFIG_LCD_LOGO) += bmp_logo
hostprogs-$(CONFIG_VIDEO_LOGO) += bmp_logo
HOSTCFLAGS_bmp_logo.o := -pedantic
hostprogs-$(CONFIG_BUILD_ENVCRC) += envcrc
envcrc-objs := envcrc.o lib/crc32.o env/embedded.o lib/sha1.o
hostprogs-$(CONFIG_CMD_NET) += gen_eth_addr
HOSTCFLAGS_gen_eth_addr.o := -pedantic
hostprogs-$(CONFIG_CMD_NET) += gen_ethaddr_crc
gen_ethaddr_crc-objs := gen_ethaddr_crc.o lib/crc8.o
HOSTCFLAGS_gen_ethaddr_crc.o := -pedantic
hostprogs-$(CONFIG_CMD_LOADS) += img2srec
HOSTCFLAGS_img2srec.o := -pedantic
hostprogs-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes
HOSTCFLAGS_xway-swap-bytes.o := -pedantic
hostprogs-y += mkenvimage
mkenvimage-objs := mkenvimage.o os_support.o lib/crc32.o
hostprogs-y += dumpimage mkimage
hostprogs-$(CONFIG_FIT_SIGNATURE) += fit_info fit_check_sign
FIT_SIG_OBJS-$(CONFIG_FIT_SIGNATURE) := common/image-sig.o
# Flattened device tree objects
LIBFDT_CSRCS := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c \
fdt_empty_tree.c fdt_addresses.c fdt_overlay.c \
fdt_region.c
# Unfortunately setup.py below cannot handle srctree being ".." which it often
# is. It fails with an error like:
# Fatal error: can't create build/temp.linux-x86_64-2.7/../lib/libfdt/fdt.o:
# No such file or directory
# To fix this, use an absolute path.
libfdt_tree := $(shell readlink -f $(srctree)/lib/libfdt)
LIBFDT_SRCS := $(addprefix $(libfdt_tree)/, $(LIBFDT_CSRCS))
LIBFDT_SWIG := $(addprefix $(libfdt_tree)/, pylibfdt/libfdt.i)
LIBFDT_OBJS := $(addprefix lib/libfdt/, $(patsubst %.c, %.o, $(LIBFDT_CSRCS)))
RSA_OBJS-$(CONFIG_FIT_SIGNATURE) := $(addprefix lib/rsa/, \
rsa-sign.o rsa-verify.o rsa-checksum.o \
rsa-mod-exp.o)
ROCKCHIP_OBS = lib/rc4.o rkcommon.o rkimage.o rksd.o rkspi.o
# common objs for dumpimage and mkimage
dumpimage-mkimage-objs := aisimage.o \
atmelimage.o \
$(FIT_SIG_OBJS-y) \
common/bootm.o \
lib/crc32.o \
default_image.o \
lib/fdtdec_common.o \
lib/fdtdec.o \
fit_common.o \
fit_image.o \
common/image-fit.o \
image-host.o \
common/image.o \
imagetool.o \
imximage.o \
kwbimage.o \
lib/md5.o \
lpc32xximage.o \
mxsimage.o \
omapimage.o \
os_support.o \
pblimage.o \
pbl_crc32.o \
vybridimage.o \
$(ROCKCHIP_OBS) \
socfpgaimage.o \
lib/sha1.o \
lib/sha256.o \
common/hash.o \
ublimage.o \
zynqimage.o \
zynqmpimage.o \
$(LIBFDT_OBJS) \
gpimage.o \
gpimage-common.o \
$(RSA_OBJS-y)
dumpimage-objs := $(dumpimage-mkimage-objs) dumpimage.o
mkimage-objs := $(dumpimage-mkimage-objs) mkimage.o
fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o
fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o
# Unfortunately setup.py (or actually the Python distutil implementation)
# puts files into the same directory as the .i file. We cannot touch the source
# directory, so we copy the .i file into the tools/ build subdirectory before
# calling setup. This directory is safe to write to. This ensures that we get
# all three files in $(obj)/tools: _libfdt.so, libfdt.py and libfdt_wrap.c
# The latter is a temporary file which we could actually remove.
tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
$(Q)cp $(LIBFDT_SWIG) tools/.
$(Q)unset CC; \
unset CROSS_COMPILE; \
LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
$(PYTHON) $(libfdt_tree)/pylibfdt/setup.py --quiet build_ext \
--build-lib tools
ifneq ($(CONFIG_MX23)$(CONFIG_MX28),)
# Add CONFIG_MXS into host CFLAGS, so we can check whether or not register
# the mxsimage support within tools/mxsimage.c .
HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS
endif
ifdef CONFIG_FIT_SIGNATURE
# This affects include/image.h, but including the board config file
# is tricky, so manually define this options here.
HOST_EXTRACFLAGS += -DCONFIG_FIT_SIGNATURE
endif
ifdef CONFIG_SYS_U_BOOT_OFFS
HOSTCFLAGS_kwbimage.o += -DCONFIG_SYS_U_BOOT_OFFS=$(CONFIG_SYS_U_BOOT_OFFS)
endif
ifneq ($(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X),)
HOSTCFLAGS_kwbimage.o += -DCONFIG_KWB_SECURE
endif
# MXSImage needs LibSSL
ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_ARMADA_38X)$(CONFIG_ARMADA_39X)$(CONFIG_FIT_SIGNATURE),)
HOSTLOADLIBES_mkimage += \
$(shell pkg-config --libs libssl libcrypto 2> /dev/null || echo "-lssl -lcrypto")
# OS X deprecate openssl in favour of CommonCrypto, supress deprecation
# warnings on those systems
ifeq ($(HOSTOS),darwin)
HOSTCFLAGS_mxsimage.o += -Wno-deprecated-declarations
HOSTCFLAGS_image-sig.o += -Wno-deprecated-declarations
HOSTCFLAGS_rsa-sign.o += -Wno-deprecated-declarations
endif
endif
HOSTCFLAGS_fit_image.o += -DMKIMAGE_DTC=\"$(CONFIG_MKIMAGE_DTC_PATH)\"
HOSTLOADLIBES_dumpimage := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_info := $(HOSTLOADLIBES_mkimage)
HOSTLOADLIBES_fit_check_sign := $(HOSTLOADLIBES_mkimage)
hostprogs-$(CONFIG_EXYNOS5250) += mkexynosspl
hostprogs-$(CONFIG_EXYNOS5420) += mkexynosspl
HOSTCFLAGS_mkexynosspl.o := -pedantic
ifdtool-objs := $(LIBFDT_OBJS) ifdtool.o
hostprogs-$(CONFIG_X86) += ifdtool
hostprogs-$(CONFIG_MX23) += mxsboot
hostprogs-$(CONFIG_MX28) += mxsboot
HOSTCFLAGS_mxsboot.o := -pedantic
hostprogs-$(CONFIG_ARCH_SUNXI) += mksunxiboot
hostprogs-$(CONFIG_ARCH_SUNXI) += sunxi-spl-image-builder
sunxi-spl-image-builder-objs := sunxi-spl-image-builder.o lib/bch.o
hostprogs-$(CONFIG_NETCONSOLE) += ncb
hostprogs-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1
ubsha1-objs := os_support.o ubsha1.o lib/sha1.o
HOSTCFLAGS_ubsha1.o := -pedantic
hostprogs-$(CONFIG_KIRKWOOD) += kwboot
hostprogs-$(CONFIG_ARCH_MVEBU) += kwboot
hostprogs-y += proftool
hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
hostprogs-y += fdtgrep
fdtgrep-objs += $(LIBFDT_OBJS) fdtgrep.o
hostprogs-$(CONFIG_MIPS) += mips-relocs
# We build some files with extra pedantic flags to try to minimize things
# that won't build on some weird host compiler -- though there are lots of
# exceptions for files that aren't complaint.
HOSTCFLAGS_crc32.o := -pedantic
HOSTCFLAGS_crc8.o := -pedantic
HOSTCFLAGS_md5.o := -pedantic
HOSTCFLAGS_sha1.o := -pedantic
HOSTCFLAGS_sha256.o := -pedantic
quiet_cmd_wrap = WRAP $@
cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
$(obj)/lib/%.c $(obj)/common/%.c $(obj)/env/%.c:
$(call cmd,wrap)
clean-dirs := lib common
always := $(hostprogs-y)
# Build a libfdt Python module if swig is available
# Use 'sudo apt-get install swig libpython-dev' to enable this
always += $(if $(shell which swig 2> /dev/null),_libfdt.so)
# Generated LCD/video logo
LOGO_H = $(objtree)/include/bmp_logo.h
LOGO_DATA_H = $(objtree)/include/bmp_logo_data.h
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_LCD_LOGO) += $(LOGO_DATA_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_H)
LOGO-$(CONFIG_VIDEO_LOGO) += $(LOGO_DATA_H)
# Generic logo
ifeq ($(LOGO_BMP),)
LOGO_BMP= $(srctree)/$(src)/logos/denx.bmp
# Use board logo and fallback to vendor
ifneq ($(wildcard $(srctree)/$(src)/logos/$(BOARD).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(BOARD).bmp
else
ifneq ($(wildcard $(srctree)/$(src)/logos/$(VENDOR).bmp),)
LOGO_BMP= $(srctree)/$(src)/logos/$(VENDOR).bmp
endif
endif
endif # !LOGO_BMP
#
# Use native tools and options
# Define __KERNEL_STRICT_NAMES to prevent typedef overlaps
# Define _GNU_SOURCE to obtain the getline prototype from stdio.h
#
HOST_EXTRACFLAGS += -include $(srctree)/include/libfdt_env.h \
$(patsubst -I%,-idirafter%, $(filter -I%, $(UBOOTINCLUDE))) \
-I$(srctree)/lib/libfdt \
-I$(srctree)/tools \
-DUSE_HOSTCC \
-D__KERNEL_STRICT_NAMES \
-D_GNU_SOURCE
__build: $(LOGO-y)
$(LOGO_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-info $(LOGO_BMP) > $@
$(LOGO_DATA_H): $(obj)/bmp_logo $(LOGO_BMP)
$(obj)/bmp_logo --gen-data $(LOGO_BMP) > $@
# Let clean descend into subdirs
subdir- += env
ifneq ($(CROSS_BUILD_TOOLS),)
override HOSTCC = $(CC)
quiet_cmd_crosstools_strip = STRIP $^
cmd_crosstools_strip = $(STRIP) $^; touch $@
$(obj)/.strip: $(call objectify,$(filter $(always),$(hostprogs-y)))
$(call cmd,crosstools_strip)
always += .strip
endif
clean-files += .strip