mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
e58e68d93e
Currently this driver does not set the value of plat->cfg.f_max, which results in that MMC framework will always run at the lowest frequency. This patch sets plat->cfg.f_max to the maximum allowed frequency, which equals to the source clock frequency. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
1809 lines
45 KiB
C
1809 lines
45 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* MediaTek SD/MMC Card Interface driver
|
|
*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
* Author: Weijie Gao <weijie.gao@mediatek.com>
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <mmc.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <mapmem.h>
|
|
#include <stdbool.h>
|
|
#include <asm/gpio.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
/* MSDC_CFG */
|
|
#define MSDC_CFG_HS400_CK_MODE_EXT BIT(22)
|
|
#define MSDC_CFG_CKMOD_EXT_M 0x300000
|
|
#define MSDC_CFG_CKMOD_EXT_S 20
|
|
#define MSDC_CFG_CKDIV_EXT_M 0xfff00
|
|
#define MSDC_CFG_CKDIV_EXT_S 8
|
|
#define MSDC_CFG_HS400_CK_MODE BIT(18)
|
|
#define MSDC_CFG_CKMOD_M 0x30000
|
|
#define MSDC_CFG_CKMOD_S 16
|
|
#define MSDC_CFG_CKDIV_M 0xff00
|
|
#define MSDC_CFG_CKDIV_S 8
|
|
#define MSDC_CFG_CKSTB BIT(7)
|
|
#define MSDC_CFG_PIO BIT(3)
|
|
#define MSDC_CFG_RST BIT(2)
|
|
#define MSDC_CFG_CKPDN BIT(1)
|
|
#define MSDC_CFG_MODE BIT(0)
|
|
|
|
/* MSDC_IOCON */
|
|
#define MSDC_IOCON_W_DSPL BIT(8)
|
|
#define MSDC_IOCON_DSPL BIT(2)
|
|
#define MSDC_IOCON_RSPL BIT(1)
|
|
|
|
/* MSDC_PS */
|
|
#define MSDC_PS_DAT0 BIT(16)
|
|
#define MSDC_PS_CDDBCE_M 0xf000
|
|
#define MSDC_PS_CDDBCE_S 12
|
|
#define MSDC_PS_CDSTS BIT(1)
|
|
#define MSDC_PS_CDEN BIT(0)
|
|
|
|
/* #define MSDC_INT(EN) */
|
|
#define MSDC_INT_ACMDRDY BIT(3)
|
|
#define MSDC_INT_ACMDTMO BIT(4)
|
|
#define MSDC_INT_ACMDCRCERR BIT(5)
|
|
#define MSDC_INT_CMDRDY BIT(8)
|
|
#define MSDC_INT_CMDTMO BIT(9)
|
|
#define MSDC_INT_RSPCRCERR BIT(10)
|
|
#define MSDC_INT_XFER_COMPL BIT(12)
|
|
#define MSDC_INT_DATTMO BIT(14)
|
|
#define MSDC_INT_DATCRCERR BIT(15)
|
|
|
|
/* MSDC_FIFOCS */
|
|
#define MSDC_FIFOCS_CLR BIT(31)
|
|
#define MSDC_FIFOCS_TXCNT_M 0xff0000
|
|
#define MSDC_FIFOCS_TXCNT_S 16
|
|
#define MSDC_FIFOCS_RXCNT_M 0xff
|
|
#define MSDC_FIFOCS_RXCNT_S 0
|
|
|
|
/* #define SDC_CFG */
|
|
#define SDC_CFG_DTOC_M 0xff000000
|
|
#define SDC_CFG_DTOC_S 24
|
|
#define SDC_CFG_SDIOIDE BIT(20)
|
|
#define SDC_CFG_SDIO BIT(19)
|
|
#define SDC_CFG_BUSWIDTH_M 0x30000
|
|
#define SDC_CFG_BUSWIDTH_S 16
|
|
|
|
/* SDC_CMD */
|
|
#define SDC_CMD_BLK_LEN_M 0xfff0000
|
|
#define SDC_CMD_BLK_LEN_S 16
|
|
#define SDC_CMD_STOP BIT(14)
|
|
#define SDC_CMD_WR BIT(13)
|
|
#define SDC_CMD_DTYPE_M 0x1800
|
|
#define SDC_CMD_DTYPE_S 11
|
|
#define SDC_CMD_RSPTYP_M 0x380
|
|
#define SDC_CMD_RSPTYP_S 7
|
|
#define SDC_CMD_CMD_M 0x3f
|
|
#define SDC_CMD_CMD_S 0
|
|
|
|
/* SDC_STS */
|
|
#define SDC_STS_CMDBUSY BIT(1)
|
|
#define SDC_STS_SDCBUSY BIT(0)
|
|
|
|
/* SDC_ADV_CFG0 */
|
|
#define SDC_RX_ENHANCE_EN BIT(20)
|
|
|
|
/* PATCH_BIT0 */
|
|
#define MSDC_INT_DAT_LATCH_CK_SEL_M 0x380
|
|
#define MSDC_INT_DAT_LATCH_CK_SEL_S 7
|
|
|
|
/* PATCH_BIT1 */
|
|
#define MSDC_PB1_STOP_DLY_M 0xf00
|
|
#define MSDC_PB1_STOP_DLY_S 8
|
|
|
|
/* PATCH_BIT2 */
|
|
#define MSDC_PB2_CRCSTSENSEL_M 0xe0000000
|
|
#define MSDC_PB2_CRCSTSENSEL_S 29
|
|
#define MSDC_PB2_CFGCRCSTS BIT(28)
|
|
#define MSDC_PB2_RESPSTSENSEL_M 0x70000
|
|
#define MSDC_PB2_RESPSTSENSEL_S 16
|
|
#define MSDC_PB2_CFGRESP BIT(15)
|
|
#define MSDC_PB2_RESPWAIT_M 0x0c
|
|
#define MSDC_PB2_RESPWAIT_S 2
|
|
|
|
/* MSDC_PAD_CTRL0 */
|
|
#define MSDC_PAD_CTRL0_CLKRDSEL_M 0xff000000
|
|
#define MSDC_PAD_CTRL0_CLKRDSEL_S 24
|
|
#define MSDC_PAD_CTRL0_CLKTDSEL BIT(20)
|
|
#define MSDC_PAD_CTRL0_CLKIES BIT(19)
|
|
#define MSDC_PAD_CTRL0_CLKSMT BIT(18)
|
|
#define MSDC_PAD_CTRL0_CLKPU BIT(17)
|
|
#define MSDC_PAD_CTRL0_CLKPD BIT(16)
|
|
#define MSDC_PAD_CTRL0_CLKSR BIT(8)
|
|
#define MSDC_PAD_CTRL0_CLKDRVP_M 0x70
|
|
#define MSDC_PAD_CTRL0_CLKDRVP_S 4
|
|
#define MSDC_PAD_CTRL0_CLKDRVN_M 0x7
|
|
#define MSDC_PAD_CTRL0_CLKDRVN_S 0
|
|
|
|
/* MSDC_PAD_CTRL1 */
|
|
#define MSDC_PAD_CTRL1_CMDRDSEL_M 0xff000000
|
|
#define MSDC_PAD_CTRL1_CMDRDSEL_S 24
|
|
#define MSDC_PAD_CTRL1_CMDTDSEL BIT(20)
|
|
#define MSDC_PAD_CTRL1_CMDIES BIT(19)
|
|
#define MSDC_PAD_CTRL1_CMDSMT BIT(18)
|
|
#define MSDC_PAD_CTRL1_CMDPU BIT(17)
|
|
#define MSDC_PAD_CTRL1_CMDPD BIT(16)
|
|
#define MSDC_PAD_CTRL1_CMDSR BIT(8)
|
|
#define MSDC_PAD_CTRL1_CMDDRVP_M 0x70
|
|
#define MSDC_PAD_CTRL1_CMDDRVP_S 4
|
|
#define MSDC_PAD_CTRL1_CMDDRVN_M 0x7
|
|
#define MSDC_PAD_CTRL1_CMDDRVN_S 0
|
|
|
|
/* MSDC_PAD_CTRL2 */
|
|
#define MSDC_PAD_CTRL2_DATRDSEL_M 0xff000000
|
|
#define MSDC_PAD_CTRL2_DATRDSEL_S 24
|
|
#define MSDC_PAD_CTRL2_DATTDSEL BIT(20)
|
|
#define MSDC_PAD_CTRL2_DATIES BIT(19)
|
|
#define MSDC_PAD_CTRL2_DATSMT BIT(18)
|
|
#define MSDC_PAD_CTRL2_DATPU BIT(17)
|
|
#define MSDC_PAD_CTRL2_DATPD BIT(16)
|
|
#define MSDC_PAD_CTRL2_DATSR BIT(8)
|
|
#define MSDC_PAD_CTRL2_DATDRVP_M 0x70
|
|
#define MSDC_PAD_CTRL2_DATDRVP_S 4
|
|
#define MSDC_PAD_CTRL2_DATDRVN_M 0x7
|
|
#define MSDC_PAD_CTRL2_DATDRVN_S 0
|
|
|
|
/* PAD_TUNE */
|
|
#define MSDC_PAD_TUNE_CLKTDLY_M 0xf8000000
|
|
#define MSDC_PAD_TUNE_CLKTDLY_S 27
|
|
#define MSDC_PAD_TUNE_CMDRRDLY_M 0x7c00000
|
|
#define MSDC_PAD_TUNE_CMDRRDLY_S 22
|
|
#define MSDC_PAD_TUNE_CMD_SEL BIT(21)
|
|
#define MSDC_PAD_TUNE_CMDRDLY_M 0x1f0000
|
|
#define MSDC_PAD_TUNE_CMDRDLY_S 16
|
|
#define MSDC_PAD_TUNE_RXDLYSEL BIT(15)
|
|
#define MSDC_PAD_TUNE_RD_SEL BIT(13)
|
|
#define MSDC_PAD_TUNE_DATRRDLY_M 0x1f00
|
|
#define MSDC_PAD_TUNE_DATRRDLY_S 8
|
|
#define MSDC_PAD_TUNE_DATWRDLY_M 0x1f
|
|
#define MSDC_PAD_TUNE_DATWRDLY_S 0
|
|
|
|
#define PAD_CMD_TUNE_RX_DLY3 0x3E
|
|
#define PAD_CMD_TUNE_RX_DLY3_S 1
|
|
|
|
/* PAD_TUNE0 */
|
|
#define MSDC_PAD_TUNE0_DAT0RDDLY_M 0x1f000000
|
|
#define MSDC_PAD_TUNE0_DAT0RDDLY_S 24
|
|
#define MSDC_PAD_TUNE0_DAT1RDDLY_M 0x1f0000
|
|
#define MSDC_PAD_TUNE0_DAT1RDDLY_S 16
|
|
#define MSDC_PAD_TUNE0_DAT2RDDLY_M 0x1f00
|
|
#define MSDC_PAD_TUNE0_DAT2RDDLY_S 8
|
|
#define MSDC_PAD_TUNE0_DAT3RDDLY_M 0x1f
|
|
#define MSDC_PAD_TUNE0_DAT3RDDLY_S 0
|
|
|
|
/* PAD_TUNE1 */
|
|
#define MSDC_PAD_TUNE1_DAT4RDDLY_M 0x1f000000
|
|
#define MSDC_PAD_TUNE1_DAT4RDDLY_S 24
|
|
#define MSDC_PAD_TUNE1_DAT5RDDLY_M 0x1f0000
|
|
#define MSDC_PAD_TUNE1_DAT5RDDLY_S 16
|
|
#define MSDC_PAD_TUNE1_DAT6RDDLY_M 0x1f00
|
|
#define MSDC_PAD_TUNE1_DAT6RDDLY_S 8
|
|
#define MSDC_PAD_TUNE1_DAT7RDDLY_M 0x1f
|
|
#define MSDC_PAD_TUNE1_DAT7RDDLY_S 0
|
|
|
|
/* EMMC50_CFG0 */
|
|
#define EMMC50_CFG_CFCSTS_SEL BIT(4)
|
|
|
|
/* SDC_FIFO_CFG */
|
|
#define SDC_FIFO_CFG_WRVALIDSEL BIT(24)
|
|
#define SDC_FIFO_CFG_RDVALIDSEL BIT(25)
|
|
|
|
/* EMMC_TOP_CONTROL mask */
|
|
#define PAD_RXDLY_SEL BIT(0)
|
|
#define DELAY_EN BIT(1)
|
|
#define PAD_DAT_RD_RXDLY2 (0x1f << 2)
|
|
#define PAD_DAT_RD_RXDLY (0x1f << 7)
|
|
#define PAD_DAT_RD_RXDLY_S 7
|
|
#define PAD_DAT_RD_RXDLY2_SEL BIT(12)
|
|
#define PAD_DAT_RD_RXDLY_SEL BIT(13)
|
|
#define DATA_K_VALUE_SEL BIT(14)
|
|
#define SDC_RX_ENH_EN BIT(15)
|
|
|
|
/* EMMC_TOP_CMD mask */
|
|
#define PAD_CMD_RXDLY2 (0x1f << 0)
|
|
#define PAD_CMD_RXDLY (0x1f << 5)
|
|
#define PAD_CMD_RXDLY_S 5
|
|
#define PAD_CMD_RD_RXDLY2_SEL BIT(10)
|
|
#define PAD_CMD_RD_RXDLY_SEL BIT(11)
|
|
#define PAD_CMD_TX_DLY (0x1f << 12)
|
|
|
|
/* SDC_CFG_BUSWIDTH */
|
|
#define MSDC_BUS_1BITS 0x0
|
|
#define MSDC_BUS_4BITS 0x1
|
|
#define MSDC_BUS_8BITS 0x2
|
|
|
|
#define MSDC_FIFO_SIZE 128
|
|
|
|
#define PAD_DELAY_MAX 32
|
|
|
|
#define DEFAULT_CD_DEBOUNCE 8
|
|
|
|
#define SCLK_CYCLES_SHIFT 20
|
|
|
|
#define CMD_INTS_MASK \
|
|
(MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO)
|
|
|
|
#define DATA_INTS_MASK \
|
|
(MSDC_INT_XFER_COMPL | MSDC_INT_DATTMO | MSDC_INT_DATCRCERR)
|
|
|
|
/* Register offset */
|
|
struct mtk_sd_regs {
|
|
u32 msdc_cfg;
|
|
u32 msdc_iocon;
|
|
u32 msdc_ps;
|
|
u32 msdc_int;
|
|
u32 msdc_inten;
|
|
u32 msdc_fifocs;
|
|
u32 msdc_txdata;
|
|
u32 msdc_rxdata;
|
|
u32 reserved0[4];
|
|
u32 sdc_cfg;
|
|
u32 sdc_cmd;
|
|
u32 sdc_arg;
|
|
u32 sdc_sts;
|
|
u32 sdc_resp[4];
|
|
u32 sdc_blk_num;
|
|
u32 sdc_vol_chg;
|
|
u32 sdc_csts;
|
|
u32 sdc_csts_en;
|
|
u32 sdc_datcrc_sts;
|
|
u32 sdc_adv_cfg0;
|
|
u32 reserved1[2];
|
|
u32 emmc_cfg0;
|
|
u32 emmc_cfg1;
|
|
u32 emmc_sts;
|
|
u32 emmc_iocon;
|
|
u32 sd_acmd_resp;
|
|
u32 sd_acmd19_trg;
|
|
u32 sd_acmd19_sts;
|
|
u32 dma_sa_high4bit;
|
|
u32 dma_sa;
|
|
u32 dma_ca;
|
|
u32 dma_ctrl;
|
|
u32 dma_cfg;
|
|
u32 sw_dbg_sel;
|
|
u32 sw_dbg_out;
|
|
u32 dma_length;
|
|
u32 reserved2;
|
|
u32 patch_bit0;
|
|
u32 patch_bit1;
|
|
u32 patch_bit2;
|
|
u32 reserved3;
|
|
u32 dat0_tune_crc;
|
|
u32 dat1_tune_crc;
|
|
u32 dat2_tune_crc;
|
|
u32 dat3_tune_crc;
|
|
u32 cmd_tune_crc;
|
|
u32 sdio_tune_wind;
|
|
u32 reserved4[2];
|
|
u32 pad_ctrl0;
|
|
u32 pad_ctrl1;
|
|
u32 pad_ctrl2;
|
|
u32 pad_tune;
|
|
u32 pad_tune0;
|
|
u32 pad_tune1;
|
|
u32 dat_rd_dly[4];
|
|
u32 reserved5[2];
|
|
u32 hw_dbg_sel;
|
|
u32 main_ver;
|
|
u32 eco_ver;
|
|
u32 reserved6[27];
|
|
u32 pad_ds_tune;
|
|
u32 pad_cmd_tune;
|
|
u32 reserved7[30];
|
|
u32 emmc50_cfg0;
|
|
u32 reserved8[7];
|
|
u32 sdc_fifo_cfg;
|
|
};
|
|
|
|
struct msdc_top_regs {
|
|
u32 emmc_top_control;
|
|
u32 emmc_top_cmd;
|
|
u32 emmc50_pad_ctl0;
|
|
u32 emmc50_pad_ds_tune;
|
|
u32 emmc50_pad_dat0_tune;
|
|
u32 emmc50_pad_dat1_tune;
|
|
u32 emmc50_pad_dat2_tune;
|
|
u32 emmc50_pad_dat3_tune;
|
|
u32 emmc50_pad_dat4_tune;
|
|
u32 emmc50_pad_dat5_tune;
|
|
u32 emmc50_pad_dat6_tune;
|
|
u32 emmc50_pad_dat7_tune;
|
|
};
|
|
|
|
struct msdc_compatible {
|
|
u8 clk_div_bits;
|
|
bool pad_tune0;
|
|
bool async_fifo;
|
|
bool data_tune;
|
|
bool busy_check;
|
|
bool stop_clk_fix;
|
|
bool enhance_rx;
|
|
bool builtin_pad_ctrl;
|
|
bool default_pad_dly;
|
|
};
|
|
|
|
struct msdc_delay_phase {
|
|
u8 maxlen;
|
|
u8 start;
|
|
u8 final_phase;
|
|
};
|
|
|
|
struct msdc_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct msdc_tune_para {
|
|
u32 iocon;
|
|
u32 pad_tune;
|
|
u32 pad_cmd_tune;
|
|
};
|
|
|
|
struct msdc_host {
|
|
struct mtk_sd_regs *base;
|
|
struct msdc_top_regs *top_base;
|
|
struct mmc *mmc;
|
|
|
|
struct msdc_compatible *dev_comp;
|
|
|
|
struct clk src_clk; /* for SD/MMC bus clock */
|
|
struct clk src_clk_cg; /* optional, MSDC source clock control gate */
|
|
struct clk h_clk; /* MSDC core clock */
|
|
|
|
u32 src_clk_freq; /* source clock */
|
|
u32 mclk; /* mmc framework required bus clock */
|
|
u32 sclk; /* actual calculated bus clock */
|
|
|
|
/* operation timeout clocks */
|
|
u32 timeout_ns;
|
|
u32 timeout_clks;
|
|
|
|
/* tuning options */
|
|
u32 hs400_ds_delay;
|
|
u32 hs200_cmd_int_delay;
|
|
u32 hs200_write_int_delay;
|
|
u32 latch_ck;
|
|
u32 r_smpl; /* sample edge */
|
|
bool hs400_mode;
|
|
|
|
/* whether to use gpio detection or built-in hw detection */
|
|
bool builtin_cd;
|
|
bool cd_active_high;
|
|
|
|
/* card detection / write protection GPIOs */
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
struct gpio_desc gpio_wp;
|
|
struct gpio_desc gpio_cd;
|
|
#endif
|
|
|
|
uint last_resp_type;
|
|
uint last_data_write;
|
|
|
|
enum bus_mode timing;
|
|
|
|
struct msdc_tune_para def_tune_para;
|
|
struct msdc_tune_para saved_tune_para;
|
|
};
|
|
|
|
static void msdc_reset_hw(struct msdc_host *host)
|
|
{
|
|
u32 reg;
|
|
|
|
setbits_le32(&host->base->msdc_cfg, MSDC_CFG_RST);
|
|
|
|
readl_poll_timeout(&host->base->msdc_cfg, reg,
|
|
!(reg & MSDC_CFG_RST), 1000000);
|
|
}
|
|
|
|
static void msdc_fifo_clr(struct msdc_host *host)
|
|
{
|
|
u32 reg;
|
|
|
|
setbits_le32(&host->base->msdc_fifocs, MSDC_FIFOCS_CLR);
|
|
|
|
readl_poll_timeout(&host->base->msdc_fifocs, reg,
|
|
!(reg & MSDC_FIFOCS_CLR), 1000000);
|
|
}
|
|
|
|
static u32 msdc_fifo_rx_bytes(struct msdc_host *host)
|
|
{
|
|
return (readl(&host->base->msdc_fifocs) &
|
|
MSDC_FIFOCS_RXCNT_M) >> MSDC_FIFOCS_RXCNT_S;
|
|
}
|
|
|
|
static u32 msdc_fifo_tx_bytes(struct msdc_host *host)
|
|
{
|
|
return (readl(&host->base->msdc_fifocs) &
|
|
MSDC_FIFOCS_TXCNT_M) >> MSDC_FIFOCS_TXCNT_S;
|
|
}
|
|
|
|
static u32 msdc_cmd_find_resp(struct msdc_host *host, struct mmc_cmd *cmd)
|
|
{
|
|
u32 resp;
|
|
|
|
switch (cmd->resp_type) {
|
|
/* Actually, R1, R5, R6, R7 are the same */
|
|
case MMC_RSP_R1:
|
|
resp = 0x1;
|
|
break;
|
|
case MMC_RSP_R1b:
|
|
resp = 0x7;
|
|
break;
|
|
case MMC_RSP_R2:
|
|
resp = 0x2;
|
|
break;
|
|
case MMC_RSP_R3:
|
|
resp = 0x3;
|
|
break;
|
|
case MMC_RSP_NONE:
|
|
default:
|
|
resp = 0x0;
|
|
break;
|
|
}
|
|
|
|
return resp;
|
|
}
|
|
|
|
static u32 msdc_cmd_prepare_raw_cmd(struct msdc_host *host,
|
|
struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
u32 opcode = cmd->cmdidx;
|
|
u32 resp_type = msdc_cmd_find_resp(host, cmd);
|
|
uint blocksize = 0;
|
|
u32 dtype = 0;
|
|
u32 rawcmd = 0;
|
|
|
|
switch (opcode) {
|
|
case MMC_CMD_WRITE_MULTIPLE_BLOCK:
|
|
case MMC_CMD_READ_MULTIPLE_BLOCK:
|
|
dtype = 2;
|
|
break;
|
|
case MMC_CMD_WRITE_SINGLE_BLOCK:
|
|
case MMC_CMD_READ_SINGLE_BLOCK:
|
|
case SD_CMD_APP_SEND_SCR:
|
|
case MMC_CMD_SEND_TUNING_BLOCK:
|
|
case MMC_CMD_SEND_TUNING_BLOCK_HS200:
|
|
dtype = 1;
|
|
break;
|
|
case SD_CMD_SWITCH_FUNC: /* same as MMC_CMD_SWITCH */
|
|
case SD_CMD_SEND_IF_COND: /* same as MMC_CMD_SEND_EXT_CSD */
|
|
case SD_CMD_APP_SD_STATUS: /* same as MMC_CMD_SEND_STATUS */
|
|
if (data)
|
|
dtype = 1;
|
|
}
|
|
|
|
if (data) {
|
|
if (data->flags == MMC_DATA_WRITE)
|
|
rawcmd |= SDC_CMD_WR;
|
|
|
|
if (data->blocks > 1)
|
|
dtype = 2;
|
|
|
|
blocksize = data->blocksize;
|
|
}
|
|
|
|
rawcmd |= ((opcode << SDC_CMD_CMD_S) & SDC_CMD_CMD_M) |
|
|
((resp_type << SDC_CMD_RSPTYP_S) & SDC_CMD_RSPTYP_M) |
|
|
((blocksize << SDC_CMD_BLK_LEN_S) & SDC_CMD_BLK_LEN_M) |
|
|
((dtype << SDC_CMD_DTYPE_S) & SDC_CMD_DTYPE_M);
|
|
|
|
if (opcode == MMC_CMD_STOP_TRANSMISSION)
|
|
rawcmd |= SDC_CMD_STOP;
|
|
|
|
return rawcmd;
|
|
}
|
|
|
|
static int msdc_cmd_done(struct msdc_host *host, int events,
|
|
struct mmc_cmd *cmd)
|
|
{
|
|
u32 *rsp = cmd->response;
|
|
int ret = 0;
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
rsp[0] = readl(&host->base->sdc_resp[3]);
|
|
rsp[1] = readl(&host->base->sdc_resp[2]);
|
|
rsp[2] = readl(&host->base->sdc_resp[1]);
|
|
rsp[3] = readl(&host->base->sdc_resp[0]);
|
|
} else {
|
|
rsp[0] = readl(&host->base->sdc_resp[0]);
|
|
}
|
|
}
|
|
|
|
if (!(events & MSDC_INT_CMDRDY)) {
|
|
if (cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK &&
|
|
cmd->cmdidx != MMC_CMD_SEND_TUNING_BLOCK_HS200)
|
|
/*
|
|
* should not clear fifo/interrupt as the tune data
|
|
* may have alreay come.
|
|
*/
|
|
msdc_reset_hw(host);
|
|
|
|
if (events & MSDC_INT_CMDTMO)
|
|
ret = -ETIMEDOUT;
|
|
else
|
|
ret = -EIO;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static bool msdc_cmd_is_ready(struct msdc_host *host)
|
|
{
|
|
int ret;
|
|
u32 reg;
|
|
|
|
/* The max busy time we can endure is 20ms */
|
|
ret = readl_poll_timeout(&host->base->sdc_sts, reg,
|
|
!(reg & SDC_STS_CMDBUSY), 20000);
|
|
|
|
if (ret) {
|
|
pr_err("CMD bus busy detected\n");
|
|
msdc_reset_hw(host);
|
|
return false;
|
|
}
|
|
|
|
if (host->last_resp_type == MMC_RSP_R1b && host->last_data_write) {
|
|
ret = readl_poll_timeout(&host->base->msdc_ps, reg,
|
|
reg & MSDC_PS_DAT0, 1000000);
|
|
|
|
if (ret) {
|
|
pr_err("Card stuck in programming state!\n");
|
|
msdc_reset_hw(host);
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
static int msdc_start_command(struct msdc_host *host, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
u32 rawcmd;
|
|
u32 status;
|
|
u32 blocks = 0;
|
|
int ret;
|
|
|
|
if (!msdc_cmd_is_ready(host))
|
|
return -EIO;
|
|
|
|
if ((readl(&host->base->msdc_fifocs) &
|
|
MSDC_FIFOCS_TXCNT_M) >> MSDC_FIFOCS_TXCNT_S ||
|
|
(readl(&host->base->msdc_fifocs) &
|
|
MSDC_FIFOCS_RXCNT_M) >> MSDC_FIFOCS_RXCNT_S) {
|
|
pr_err("TX/RX FIFO non-empty before start of IO. Reset\n");
|
|
msdc_reset_hw(host);
|
|
}
|
|
|
|
msdc_fifo_clr(host);
|
|
|
|
host->last_resp_type = cmd->resp_type;
|
|
host->last_data_write = 0;
|
|
|
|
rawcmd = msdc_cmd_prepare_raw_cmd(host, cmd, data);
|
|
|
|
if (data)
|
|
blocks = data->blocks;
|
|
|
|
writel(CMD_INTS_MASK, &host->base->msdc_int);
|
|
writel(DATA_INTS_MASK, &host->base->msdc_int);
|
|
writel(blocks, &host->base->sdc_blk_num);
|
|
writel(cmd->cmdarg, &host->base->sdc_arg);
|
|
writel(rawcmd, &host->base->sdc_cmd);
|
|
|
|
ret = readl_poll_timeout(&host->base->msdc_int, status,
|
|
status & CMD_INTS_MASK, 1000000);
|
|
|
|
if (ret)
|
|
status = MSDC_INT_CMDTMO;
|
|
|
|
return msdc_cmd_done(host, status, cmd);
|
|
}
|
|
|
|
static void msdc_fifo_read(struct msdc_host *host, u8 *buf, u32 size)
|
|
{
|
|
u32 *wbuf;
|
|
|
|
while ((size_t)buf % 4) {
|
|
*buf++ = readb(&host->base->msdc_rxdata);
|
|
size--;
|
|
}
|
|
|
|
wbuf = (u32 *)buf;
|
|
while (size >= 4) {
|
|
*wbuf++ = readl(&host->base->msdc_rxdata);
|
|
size -= 4;
|
|
}
|
|
|
|
buf = (u8 *)wbuf;
|
|
while (size) {
|
|
*buf++ = readb(&host->base->msdc_rxdata);
|
|
size--;
|
|
}
|
|
}
|
|
|
|
static void msdc_fifo_write(struct msdc_host *host, const u8 *buf, u32 size)
|
|
{
|
|
const u32 *wbuf;
|
|
|
|
while ((size_t)buf % 4) {
|
|
writeb(*buf++, &host->base->msdc_txdata);
|
|
size--;
|
|
}
|
|
|
|
wbuf = (const u32 *)buf;
|
|
while (size >= 4) {
|
|
writel(*wbuf++, &host->base->msdc_txdata);
|
|
size -= 4;
|
|
}
|
|
|
|
buf = (const u8 *)wbuf;
|
|
while (size) {
|
|
writeb(*buf++, &host->base->msdc_txdata);
|
|
size--;
|
|
}
|
|
}
|
|
|
|
static int msdc_pio_read(struct msdc_host *host, u8 *ptr, u32 size)
|
|
{
|
|
u32 status;
|
|
u32 chksz;
|
|
int ret = 0;
|
|
|
|
while (1) {
|
|
status = readl(&host->base->msdc_int);
|
|
writel(status, &host->base->msdc_int);
|
|
status &= DATA_INTS_MASK;
|
|
|
|
if (status & MSDC_INT_DATCRCERR) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
if (status & MSDC_INT_DATTMO) {
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
chksz = min(size, (u32)MSDC_FIFO_SIZE);
|
|
|
|
if (msdc_fifo_rx_bytes(host) >= chksz) {
|
|
msdc_fifo_read(host, ptr, chksz);
|
|
ptr += chksz;
|
|
size -= chksz;
|
|
}
|
|
|
|
if (status & MSDC_INT_XFER_COMPL) {
|
|
if (size) {
|
|
pr_err("data not fully read\n");
|
|
ret = -EIO;
|
|
}
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_pio_write(struct msdc_host *host, const u8 *ptr, u32 size)
|
|
{
|
|
u32 status;
|
|
u32 chksz;
|
|
int ret = 0;
|
|
|
|
while (1) {
|
|
status = readl(&host->base->msdc_int);
|
|
writel(status, &host->base->msdc_int);
|
|
status &= DATA_INTS_MASK;
|
|
|
|
if (status & MSDC_INT_DATCRCERR) {
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
|
|
if (status & MSDC_INT_DATTMO) {
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
if (status & MSDC_INT_XFER_COMPL) {
|
|
if (size) {
|
|
pr_err("data not fully written\n");
|
|
ret = -EIO;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
chksz = min(size, (u32)MSDC_FIFO_SIZE);
|
|
|
|
if (MSDC_FIFO_SIZE - msdc_fifo_tx_bytes(host) >= chksz) {
|
|
msdc_fifo_write(host, ptr, chksz);
|
|
ptr += chksz;
|
|
size -= chksz;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_start_data(struct msdc_host *host, struct mmc_data *data)
|
|
{
|
|
u32 size;
|
|
int ret;
|
|
|
|
if (data->flags == MMC_DATA_WRITE)
|
|
host->last_data_write = 1;
|
|
|
|
size = data->blocks * data->blocksize;
|
|
|
|
if (data->flags == MMC_DATA_WRITE)
|
|
ret = msdc_pio_write(host, (const u8 *)data->src, size);
|
|
else
|
|
ret = msdc_pio_read(host, (u8 *)data->dest, size);
|
|
|
|
if (ret) {
|
|
msdc_reset_hw(host);
|
|
msdc_fifo_clr(host);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int msdc_ops_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
int cmd_ret, data_ret;
|
|
|
|
cmd_ret = msdc_start_command(host, cmd, data);
|
|
if (cmd_ret &&
|
|
!(cmd_ret == -EIO &&
|
|
(cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK ||
|
|
cmd->cmdidx == MMC_CMD_SEND_TUNING_BLOCK_HS200)))
|
|
return cmd_ret;
|
|
|
|
if (data) {
|
|
data_ret = msdc_start_data(host, data);
|
|
if (cmd_ret)
|
|
return cmd_ret;
|
|
else
|
|
return data_ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks)
|
|
{
|
|
u32 timeout, clk_ns, shift = SCLK_CYCLES_SHIFT;
|
|
u32 mode = 0;
|
|
|
|
host->timeout_ns = ns;
|
|
host->timeout_clks = clks;
|
|
|
|
if (host->sclk == 0) {
|
|
timeout = 0;
|
|
} else {
|
|
clk_ns = 1000000000UL / host->sclk;
|
|
timeout = (ns + clk_ns - 1) / clk_ns + clks;
|
|
/* unit is 1048576 sclk cycles */
|
|
timeout = (timeout + (0x1 << shift) - 1) >> shift;
|
|
if (host->dev_comp->clk_div_bits == 8)
|
|
mode = (readl(&host->base->msdc_cfg) &
|
|
MSDC_CFG_CKMOD_M) >> MSDC_CFG_CKMOD_S;
|
|
else
|
|
mode = (readl(&host->base->msdc_cfg) &
|
|
MSDC_CFG_CKMOD_EXT_M) >> MSDC_CFG_CKMOD_EXT_S;
|
|
/* DDR mode will double the clk cycles for data timeout */
|
|
timeout = mode >= 2 ? timeout * 2 : timeout;
|
|
timeout = timeout > 1 ? timeout - 1 : 0;
|
|
timeout = timeout > 255 ? 255 : timeout;
|
|
}
|
|
|
|
clrsetbits_le32(&host->base->sdc_cfg, SDC_CFG_DTOC_M,
|
|
timeout << SDC_CFG_DTOC_S);
|
|
}
|
|
|
|
static void msdc_set_buswidth(struct msdc_host *host, u32 width)
|
|
{
|
|
u32 val = readl(&host->base->sdc_cfg);
|
|
|
|
val &= ~SDC_CFG_BUSWIDTH_M;
|
|
|
|
switch (width) {
|
|
default:
|
|
case 1:
|
|
val |= (MSDC_BUS_1BITS << SDC_CFG_BUSWIDTH_S);
|
|
break;
|
|
case 4:
|
|
val |= (MSDC_BUS_4BITS << SDC_CFG_BUSWIDTH_S);
|
|
break;
|
|
case 8:
|
|
val |= (MSDC_BUS_8BITS << SDC_CFG_BUSWIDTH_S);
|
|
break;
|
|
}
|
|
|
|
writel(val, &host->base->sdc_cfg);
|
|
}
|
|
|
|
static void msdc_set_mclk(struct udevice *dev,
|
|
struct msdc_host *host, enum bus_mode timing, u32 hz)
|
|
{
|
|
u32 mode;
|
|
u32 div;
|
|
u32 sclk;
|
|
u32 reg;
|
|
|
|
if (!hz) {
|
|
host->mclk = 0;
|
|
clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN);
|
|
return;
|
|
}
|
|
|
|
if (host->dev_comp->clk_div_bits == 8)
|
|
clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_HS400_CK_MODE);
|
|
else
|
|
clrbits_le32(&host->base->msdc_cfg,
|
|
MSDC_CFG_HS400_CK_MODE_EXT);
|
|
|
|
if (timing == UHS_DDR50 || timing == MMC_DDR_52 ||
|
|
timing == MMC_HS_400) {
|
|
if (timing == MMC_HS_400)
|
|
mode = 0x3;
|
|
else
|
|
mode = 0x2; /* ddr mode and use divisor */
|
|
|
|
if (hz >= (host->src_clk_freq >> 2)) {
|
|
div = 0; /* mean div = 1/4 */
|
|
sclk = host->src_clk_freq >> 2; /* sclk = clk / 4 */
|
|
} else {
|
|
div = (host->src_clk_freq + ((hz << 2) - 1)) /
|
|
(hz << 2);
|
|
sclk = (host->src_clk_freq >> 2) / div;
|
|
div = (div >> 1);
|
|
}
|
|
|
|
if (timing == MMC_HS_400 && hz >= (host->src_clk_freq >> 1)) {
|
|
if (host->dev_comp->clk_div_bits == 8)
|
|
setbits_le32(&host->base->msdc_cfg,
|
|
MSDC_CFG_HS400_CK_MODE);
|
|
else
|
|
setbits_le32(&host->base->msdc_cfg,
|
|
MSDC_CFG_HS400_CK_MODE_EXT);
|
|
|
|
sclk = host->src_clk_freq >> 1;
|
|
div = 0; /* div is ignore when bit18 is set */
|
|
}
|
|
} else if (hz >= host->src_clk_freq) {
|
|
mode = 0x1; /* no divisor */
|
|
div = 0;
|
|
sclk = host->src_clk_freq;
|
|
} else {
|
|
mode = 0x0; /* use divisor */
|
|
if (hz >= (host->src_clk_freq >> 1)) {
|
|
div = 0; /* mean div = 1/2 */
|
|
sclk = host->src_clk_freq >> 1; /* sclk = clk / 2 */
|
|
} else {
|
|
div = (host->src_clk_freq + ((hz << 2) - 1)) /
|
|
(hz << 2);
|
|
sclk = (host->src_clk_freq >> 2) / div;
|
|
}
|
|
}
|
|
|
|
clrbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN);
|
|
|
|
if (host->dev_comp->clk_div_bits == 8) {
|
|
div = min(div, (u32)(MSDC_CFG_CKDIV_M >> MSDC_CFG_CKDIV_S));
|
|
clrsetbits_le32(&host->base->msdc_cfg,
|
|
MSDC_CFG_CKMOD_M | MSDC_CFG_CKDIV_M,
|
|
(mode << MSDC_CFG_CKMOD_S) |
|
|
(div << MSDC_CFG_CKDIV_S));
|
|
} else {
|
|
div = min(div, (u32)(MSDC_CFG_CKDIV_EXT_M >>
|
|
MSDC_CFG_CKDIV_EXT_S));
|
|
clrsetbits_le32(&host->base->msdc_cfg,
|
|
MSDC_CFG_CKMOD_EXT_M | MSDC_CFG_CKDIV_EXT_M,
|
|
(mode << MSDC_CFG_CKMOD_EXT_S) |
|
|
(div << MSDC_CFG_CKDIV_EXT_S));
|
|
}
|
|
|
|
readl_poll_timeout(&host->base->msdc_cfg, reg,
|
|
reg & MSDC_CFG_CKSTB, 1000000);
|
|
|
|
setbits_le32(&host->base->msdc_cfg, MSDC_CFG_CKPDN);
|
|
host->sclk = sclk;
|
|
host->mclk = hz;
|
|
host->timing = timing;
|
|
|
|
/* needed because clk changed. */
|
|
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks);
|
|
|
|
/*
|
|
* mmc_select_hs400() will drop to 50Mhz and High speed mode,
|
|
* tune result of hs200/200Mhz is not suitable for 50Mhz
|
|
*/
|
|
if (host->sclk <= 52000000) {
|
|
writel(host->def_tune_para.iocon, &host->base->msdc_iocon);
|
|
writel(host->def_tune_para.pad_tune,
|
|
&host->base->pad_tune);
|
|
} else {
|
|
writel(host->saved_tune_para.iocon, &host->base->msdc_iocon);
|
|
writel(host->saved_tune_para.pad_tune,
|
|
&host->base->pad_tune);
|
|
}
|
|
|
|
dev_dbg(dev, "sclk: %d, timing: %d\n", host->sclk, timing);
|
|
}
|
|
|
|
static int msdc_ops_set_ios(struct udevice *dev)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
uint clock = mmc->clock;
|
|
|
|
msdc_set_buswidth(host, mmc->bus_width);
|
|
|
|
if (mmc->clk_disable)
|
|
clock = 0;
|
|
else if (clock < mmc->cfg->f_min)
|
|
clock = mmc->cfg->f_min;
|
|
|
|
if (host->mclk != clock || host->timing != mmc->selected_mode)
|
|
msdc_set_mclk(dev, host, mmc->selected_mode, clock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msdc_ops_get_cd(struct udevice *dev)
|
|
{
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
u32 val;
|
|
|
|
if (host->builtin_cd) {
|
|
val = readl(&host->base->msdc_ps);
|
|
val = !!(val & MSDC_PS_CDSTS);
|
|
|
|
return !val ^ host->cd_active_high;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
if (!host->gpio_cd.dev)
|
|
return 1;
|
|
|
|
return dm_gpio_get_value(&host->gpio_cd);
|
|
#else
|
|
return 1;
|
|
#endif
|
|
}
|
|
|
|
static int msdc_ops_get_wp(struct udevice *dev)
|
|
{
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
|
|
if (!host->gpio_wp.dev)
|
|
return 0;
|
|
|
|
return !dm_gpio_get_value(&host->gpio_wp);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
static u32 test_delay_bit(u32 delay, u32 bit)
|
|
{
|
|
bit %= PAD_DELAY_MAX;
|
|
return delay & (1 << bit);
|
|
}
|
|
|
|
static int get_delay_len(u32 delay, u32 start_bit)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < (PAD_DELAY_MAX - start_bit); i++) {
|
|
if (test_delay_bit(delay, start_bit + i) == 0)
|
|
return i;
|
|
}
|
|
|
|
return PAD_DELAY_MAX - start_bit;
|
|
}
|
|
|
|
static struct msdc_delay_phase get_best_delay(struct udevice *dev,
|
|
struct msdc_host *host, u32 delay)
|
|
{
|
|
int start = 0, len = 0;
|
|
int start_final = 0, len_final = 0;
|
|
u8 final_phase = 0xff;
|
|
struct msdc_delay_phase delay_phase = { 0, };
|
|
|
|
if (delay == 0) {
|
|
dev_err(dev, "phase error: [map:%x]\n", delay);
|
|
delay_phase.final_phase = final_phase;
|
|
return delay_phase;
|
|
}
|
|
|
|
while (start < PAD_DELAY_MAX) {
|
|
len = get_delay_len(delay, start);
|
|
if (len_final < len) {
|
|
start_final = start;
|
|
len_final = len;
|
|
}
|
|
|
|
start += len ? len : 1;
|
|
if (len >= 12 && start_final < 4)
|
|
break;
|
|
}
|
|
|
|
/* The rule is to find the smallest delay cell */
|
|
if (start_final == 0)
|
|
final_phase = (start_final + len_final / 3) % PAD_DELAY_MAX;
|
|
else
|
|
final_phase = (start_final + len_final / 2) % PAD_DELAY_MAX;
|
|
|
|
dev_info(dev, "phase: [map:%x] [maxlen:%d] [final:%d]\n",
|
|
delay, len_final, final_phase);
|
|
|
|
delay_phase.maxlen = len_final;
|
|
delay_phase.start = start_final;
|
|
delay_phase.final_phase = final_phase;
|
|
return delay_phase;
|
|
}
|
|
|
|
static inline void msdc_set_cmd_delay(struct msdc_host *host, u32 value)
|
|
{
|
|
void __iomem *tune_reg = &host->base->pad_tune;
|
|
|
|
if (host->dev_comp->pad_tune0)
|
|
tune_reg = &host->base->pad_tune0;
|
|
|
|
if (host->top_base)
|
|
clrsetbits_le32(&host->top_base->emmc_top_cmd, PAD_CMD_RXDLY,
|
|
value << PAD_CMD_RXDLY_S);
|
|
else
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
|
|
value << MSDC_PAD_TUNE_CMDRDLY_S);
|
|
}
|
|
|
|
static inline void msdc_set_data_delay(struct msdc_host *host, u32 value)
|
|
{
|
|
void __iomem *tune_reg = &host->base->pad_tune;
|
|
|
|
if (host->dev_comp->pad_tune0)
|
|
tune_reg = &host->base->pad_tune0;
|
|
|
|
if (host->top_base)
|
|
clrsetbits_le32(&host->top_base->emmc_top_control,
|
|
PAD_DAT_RD_RXDLY, value << PAD_DAT_RD_RXDLY_S);
|
|
else
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
|
|
value << MSDC_PAD_TUNE_DATRRDLY_S);
|
|
}
|
|
|
|
static int hs400_tune_response(struct udevice *dev, u32 opcode)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
u32 cmd_delay = 0;
|
|
struct msdc_delay_phase final_cmd_delay = { 0, };
|
|
u8 final_delay;
|
|
void __iomem *tune_reg = &host->base->pad_cmd_tune;
|
|
int cmd_err;
|
|
int i, j;
|
|
|
|
setbits_le32(&host->base->pad_cmd_tune, BIT(0));
|
|
|
|
if (mmc->selected_mode == MMC_HS_200 ||
|
|
mmc->selected_mode == UHS_SDR104)
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
|
|
host->hs200_cmd_int_delay <<
|
|
MSDC_PAD_TUNE_CMDRRDLY_S);
|
|
|
|
if (host->r_smpl)
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
else
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, PAD_CMD_TUNE_RX_DLY3,
|
|
i << PAD_CMD_TUNE_RX_DLY3_S);
|
|
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
cmd_delay |= (1 << i);
|
|
} else {
|
|
cmd_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
final_cmd_delay = get_best_delay(dev, host, cmd_delay);
|
|
clrsetbits_le32(tune_reg, PAD_CMD_TUNE_RX_DLY3,
|
|
final_cmd_delay.final_phase <<
|
|
PAD_CMD_TUNE_RX_DLY3_S);
|
|
final_delay = final_cmd_delay.final_phase;
|
|
|
|
dev_info(dev, "Final cmd pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int msdc_tune_response(struct udevice *dev, u32 opcode)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
u32 rise_delay = 0, fall_delay = 0;
|
|
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, };
|
|
struct msdc_delay_phase internal_delay_phase;
|
|
u8 final_delay, final_maxlen;
|
|
u32 internal_delay = 0;
|
|
void __iomem *tune_reg = &host->base->pad_tune;
|
|
int cmd_err;
|
|
int i, j;
|
|
|
|
if (host->dev_comp->pad_tune0)
|
|
tune_reg = &host->base->pad_tune0;
|
|
|
|
if (mmc->selected_mode == MMC_HS_200 ||
|
|
mmc->selected_mode == UHS_SDR104)
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
|
|
host->hs200_cmd_int_delay <<
|
|
MSDC_PAD_TUNE_CMDRRDLY_S);
|
|
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
|
|
i << MSDC_PAD_TUNE_CMDRDLY_S);
|
|
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
rise_delay |= (1 << i);
|
|
} else {
|
|
rise_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
final_rise_delay = get_best_delay(dev, host, rise_delay);
|
|
/* if rising edge has enough margin, do not scan falling edge */
|
|
if (final_rise_delay.maxlen >= 12 ||
|
|
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
|
|
goto skip_fall;
|
|
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
|
|
i << MSDC_PAD_TUNE_CMDRDLY_S);
|
|
|
|
for (j = 0; j < 3; j++) {
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err) {
|
|
fall_delay |= (1 << i);
|
|
} else {
|
|
fall_delay &= ~(1 << i);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
final_fall_delay = get_best_delay(dev, host, fall_delay);
|
|
|
|
skip_fall:
|
|
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
|
|
if (final_maxlen == final_rise_delay.maxlen) {
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
|
|
final_rise_delay.final_phase <<
|
|
MSDC_PAD_TUNE_CMDRDLY_S);
|
|
final_delay = final_rise_delay.final_phase;
|
|
} else {
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRDLY_M,
|
|
final_fall_delay.final_phase <<
|
|
MSDC_PAD_TUNE_CMDRDLY_S);
|
|
final_delay = final_fall_delay.final_phase;
|
|
}
|
|
|
|
if (host->dev_comp->async_fifo || host->hs200_cmd_int_delay)
|
|
goto skip_internal;
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
|
|
i << MSDC_PAD_TUNE_CMDRRDLY_S);
|
|
|
|
mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!cmd_err)
|
|
internal_delay |= (1 << i);
|
|
}
|
|
|
|
dev_dbg(dev, "Final internal delay: 0x%x\n", internal_delay);
|
|
|
|
internal_delay_phase = get_best_delay(dev, host, internal_delay);
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CMDRRDLY_M,
|
|
internal_delay_phase.final_phase <<
|
|
MSDC_PAD_TUNE_CMDRRDLY_S);
|
|
|
|
skip_internal:
|
|
dev_dbg(dev, "Final cmd pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int msdc_tune_data(struct udevice *dev, u32 opcode)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
u32 rise_delay = 0, fall_delay = 0;
|
|
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, };
|
|
u8 final_delay, final_maxlen;
|
|
void __iomem *tune_reg = &host->base->pad_tune;
|
|
int cmd_err;
|
|
int i, ret;
|
|
|
|
if (host->dev_comp->pad_tune0)
|
|
tune_reg = &host->base->pad_tune0;
|
|
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
|
|
i << MSDC_PAD_TUNE_DATRRDLY_S);
|
|
|
|
ret = mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!ret) {
|
|
rise_delay |= (1 << i);
|
|
} else if (cmd_err) {
|
|
/* in this case, retune response is needed */
|
|
ret = msdc_tune_response(dev, opcode);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
final_rise_delay = get_best_delay(dev, host, rise_delay);
|
|
if (final_rise_delay.maxlen >= 12 ||
|
|
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
|
|
goto skip_fall;
|
|
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
|
|
i << MSDC_PAD_TUNE_DATRRDLY_S);
|
|
|
|
ret = mmc_send_tuning(mmc, opcode, &cmd_err);
|
|
if (!ret) {
|
|
fall_delay |= (1 << i);
|
|
} else if (cmd_err) {
|
|
/* in this case, retune response is needed */
|
|
ret = msdc_tune_response(dev, opcode);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
final_fall_delay = get_best_delay(dev, host, fall_delay);
|
|
|
|
skip_fall:
|
|
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
|
|
if (final_maxlen == final_rise_delay.maxlen) {
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
|
|
final_rise_delay.final_phase <<
|
|
MSDC_PAD_TUNE_DATRRDLY_S);
|
|
final_delay = final_rise_delay.final_phase;
|
|
} else {
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATRRDLY_M,
|
|
final_fall_delay.final_phase <<
|
|
MSDC_PAD_TUNE_DATRRDLY_S);
|
|
final_delay = final_fall_delay.final_phase;
|
|
}
|
|
|
|
if (mmc->selected_mode == MMC_HS_200 ||
|
|
mmc->selected_mode == UHS_SDR104)
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_DATWRDLY_M,
|
|
host->hs200_write_int_delay <<
|
|
MSDC_PAD_TUNE_DATWRDLY_S);
|
|
|
|
dev_dbg(dev, "Final data pad delay: %x\n", final_delay);
|
|
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
/*
|
|
* MSDC IP which supports data tune + async fifo can do CMD/DAT tune
|
|
* together, which can save the tuning time.
|
|
*/
|
|
static int msdc_tune_together(struct udevice *dev, u32 opcode)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
u32 rise_delay = 0, fall_delay = 0;
|
|
struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0, };
|
|
u8 final_delay, final_maxlen;
|
|
int i, ret;
|
|
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
msdc_set_cmd_delay(host, i);
|
|
msdc_set_data_delay(host, i);
|
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
|
if (!ret)
|
|
rise_delay |= (1 << i);
|
|
}
|
|
|
|
final_rise_delay = get_best_delay(dev, host, rise_delay);
|
|
if (final_rise_delay.maxlen >= 12 ||
|
|
(final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
|
|
goto skip_fall;
|
|
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
|
|
for (i = 0; i < PAD_DELAY_MAX; i++) {
|
|
msdc_set_cmd_delay(host, i);
|
|
msdc_set_data_delay(host, i);
|
|
ret = mmc_send_tuning(mmc, opcode, NULL);
|
|
if (!ret)
|
|
fall_delay |= (1 << i);
|
|
}
|
|
|
|
final_fall_delay = get_best_delay(dev, host, fall_delay);
|
|
|
|
skip_fall:
|
|
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
|
|
if (final_maxlen == final_rise_delay.maxlen) {
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
final_delay = final_rise_delay.final_phase;
|
|
} else {
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_DSPL);
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_W_DSPL);
|
|
final_delay = final_fall_delay.final_phase;
|
|
}
|
|
|
|
msdc_set_cmd_delay(host, final_delay);
|
|
msdc_set_data_delay(host, final_delay);
|
|
|
|
dev_info(dev, "Final pad delay: %x\n", final_delay);
|
|
return final_delay == 0xff ? -EIO : 0;
|
|
}
|
|
|
|
static int msdc_execute_tuning(struct udevice *dev, uint opcode)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc *mmc = &plat->mmc;
|
|
int ret = 0;
|
|
|
|
if (host->dev_comp->data_tune && host->dev_comp->async_fifo) {
|
|
ret = msdc_tune_together(dev, opcode);
|
|
if (ret == -EIO) {
|
|
dev_err(dev, "Tune fail!\n");
|
|
return ret;
|
|
}
|
|
|
|
if (mmc->selected_mode == MMC_HS_400) {
|
|
clrbits_le32(&host->base->msdc_iocon,
|
|
MSDC_IOCON_DSPL | MSDC_IOCON_W_DSPL);
|
|
clrsetbits_le32(&host->base->pad_tune,
|
|
MSDC_PAD_TUNE_DATRRDLY_M, 0);
|
|
|
|
writel(host->hs400_ds_delay, &host->base->pad_ds_tune);
|
|
/* for hs400 mode it must be set to 0 */
|
|
clrbits_le32(&host->base->patch_bit2,
|
|
MSDC_PB2_CFGCRCSTS);
|
|
host->hs400_mode = true;
|
|
}
|
|
goto tune_done;
|
|
}
|
|
|
|
if (mmc->selected_mode == MMC_HS_400)
|
|
ret = hs400_tune_response(dev, opcode);
|
|
else
|
|
ret = msdc_tune_response(dev, opcode);
|
|
if (ret == -EIO) {
|
|
dev_err(dev, "Tune response fail!\n");
|
|
return ret;
|
|
}
|
|
|
|
if (mmc->selected_mode != MMC_HS_400) {
|
|
ret = msdc_tune_data(dev, opcode);
|
|
if (ret == -EIO) {
|
|
dev_err(dev, "Tune data fail!\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
tune_done:
|
|
host->saved_tune_para.iocon = readl(&host->base->msdc_iocon);
|
|
host->saved_tune_para.pad_tune = readl(&host->base->pad_tune);
|
|
host->saved_tune_para.pad_cmd_tune = readl(&host->base->pad_cmd_tune);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static void msdc_init_hw(struct msdc_host *host)
|
|
{
|
|
u32 val;
|
|
void __iomem *tune_reg = &host->base->pad_tune;
|
|
void __iomem *rd_dly0_reg = &host->base->pad_tune0;
|
|
void __iomem *rd_dly1_reg = &host->base->pad_tune1;
|
|
|
|
if (host->dev_comp->pad_tune0) {
|
|
tune_reg = &host->base->pad_tune0;
|
|
rd_dly0_reg = &host->base->dat_rd_dly[0];
|
|
rd_dly1_reg = &host->base->dat_rd_dly[1];
|
|
}
|
|
|
|
/* Configure to MMC/SD mode, clock free running */
|
|
setbits_le32(&host->base->msdc_cfg, MSDC_CFG_MODE);
|
|
|
|
/* Use PIO mode */
|
|
setbits_le32(&host->base->msdc_cfg, MSDC_CFG_PIO);
|
|
|
|
/* Reset */
|
|
msdc_reset_hw(host);
|
|
|
|
/* Enable/disable hw card detection according to fdt option */
|
|
if (host->builtin_cd)
|
|
clrsetbits_le32(&host->base->msdc_ps,
|
|
MSDC_PS_CDDBCE_M,
|
|
(DEFAULT_CD_DEBOUNCE << MSDC_PS_CDDBCE_S) |
|
|
MSDC_PS_CDEN);
|
|
else
|
|
clrbits_le32(&host->base->msdc_ps, MSDC_PS_CDEN);
|
|
|
|
/* Clear all interrupts */
|
|
val = readl(&host->base->msdc_int);
|
|
writel(val, &host->base->msdc_int);
|
|
|
|
/* Enable data & cmd interrupts */
|
|
writel(DATA_INTS_MASK | CMD_INTS_MASK, &host->base->msdc_inten);
|
|
|
|
writel(0, tune_reg);
|
|
writel(0, &host->base->msdc_iocon);
|
|
|
|
if (host->r_smpl)
|
|
setbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
else
|
|
clrbits_le32(&host->base->msdc_iocon, MSDC_IOCON_RSPL);
|
|
|
|
writel(0x403c0046, &host->base->patch_bit0);
|
|
writel(0xffff4089, &host->base->patch_bit1);
|
|
|
|
if (host->dev_comp->stop_clk_fix)
|
|
clrsetbits_le32(&host->base->patch_bit1, MSDC_PB1_STOP_DLY_M,
|
|
3 << MSDC_PB1_STOP_DLY_S);
|
|
|
|
if (host->dev_comp->busy_check)
|
|
clrbits_le32(&host->base->patch_bit1, (1 << 7));
|
|
|
|
setbits_le32(&host->base->emmc50_cfg0, EMMC50_CFG_CFCSTS_SEL);
|
|
|
|
if (host->dev_comp->async_fifo) {
|
|
clrsetbits_le32(&host->base->patch_bit2, MSDC_PB2_RESPWAIT_M,
|
|
3 << MSDC_PB2_RESPWAIT_S);
|
|
|
|
if (host->dev_comp->enhance_rx) {
|
|
if (host->top_base)
|
|
setbits_le32(&host->top_base->emmc_top_control,
|
|
SDC_RX_ENH_EN);
|
|
else
|
|
setbits_le32(&host->base->sdc_adv_cfg0,
|
|
SDC_RX_ENHANCE_EN);
|
|
} else {
|
|
clrsetbits_le32(&host->base->patch_bit2,
|
|
MSDC_PB2_RESPSTSENSEL_M,
|
|
2 << MSDC_PB2_RESPSTSENSEL_S);
|
|
clrsetbits_le32(&host->base->patch_bit2,
|
|
MSDC_PB2_CRCSTSENSEL_M,
|
|
2 << MSDC_PB2_CRCSTSENSEL_S);
|
|
}
|
|
|
|
/* use async fifo to avoid tune internal delay */
|
|
clrbits_le32(&host->base->patch_bit2,
|
|
MSDC_PB2_CFGRESP);
|
|
clrbits_le32(&host->base->patch_bit2,
|
|
MSDC_PB2_CFGCRCSTS);
|
|
}
|
|
|
|
if (host->dev_comp->data_tune) {
|
|
setbits_le32(tune_reg,
|
|
MSDC_PAD_TUNE_RD_SEL | MSDC_PAD_TUNE_CMD_SEL);
|
|
clrsetbits_le32(&host->base->patch_bit0,
|
|
MSDC_INT_DAT_LATCH_CK_SEL_M,
|
|
host->latch_ck <<
|
|
MSDC_INT_DAT_LATCH_CK_SEL_S);
|
|
} else {
|
|
/* choose clock tune */
|
|
setbits_le32(tune_reg, MSDC_PAD_TUNE_RXDLYSEL);
|
|
}
|
|
|
|
if (host->dev_comp->builtin_pad_ctrl) {
|
|
/* Set pins driving strength */
|
|
writel(MSDC_PAD_CTRL0_CLKPD | MSDC_PAD_CTRL0_CLKSMT |
|
|
MSDC_PAD_CTRL0_CLKIES | (4 << MSDC_PAD_CTRL0_CLKDRVN_S) |
|
|
(4 << MSDC_PAD_CTRL0_CLKDRVP_S), &host->base->pad_ctrl0);
|
|
writel(MSDC_PAD_CTRL1_CMDPU | MSDC_PAD_CTRL1_CMDSMT |
|
|
MSDC_PAD_CTRL1_CMDIES | (4 << MSDC_PAD_CTRL1_CMDDRVN_S) |
|
|
(4 << MSDC_PAD_CTRL1_CMDDRVP_S), &host->base->pad_ctrl1);
|
|
writel(MSDC_PAD_CTRL2_DATPU | MSDC_PAD_CTRL2_DATSMT |
|
|
MSDC_PAD_CTRL2_DATIES | (4 << MSDC_PAD_CTRL2_DATDRVN_S) |
|
|
(4 << MSDC_PAD_CTRL2_DATDRVP_S), &host->base->pad_ctrl2);
|
|
}
|
|
|
|
if (host->dev_comp->default_pad_dly) {
|
|
/* Default pad delay may be needed if tuning not enabled */
|
|
clrsetbits_le32(tune_reg, MSDC_PAD_TUNE_CLKTDLY_M |
|
|
MSDC_PAD_TUNE_CMDRRDLY_M |
|
|
MSDC_PAD_TUNE_CMDRDLY_M |
|
|
MSDC_PAD_TUNE_DATRRDLY_M |
|
|
MSDC_PAD_TUNE_DATWRDLY_M,
|
|
(0x10 << MSDC_PAD_TUNE_CLKTDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE_CMDRRDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE_CMDRDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE_DATRRDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE_DATWRDLY_S));
|
|
|
|
writel((0x10 << MSDC_PAD_TUNE0_DAT0RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE0_DAT1RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE0_DAT2RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE0_DAT3RDDLY_S),
|
|
rd_dly0_reg);
|
|
|
|
writel((0x10 << MSDC_PAD_TUNE1_DAT4RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE1_DAT5RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE1_DAT6RDDLY_S) |
|
|
(0x10 << MSDC_PAD_TUNE1_DAT7RDDLY_S),
|
|
rd_dly1_reg);
|
|
}
|
|
|
|
/* Configure to enable SDIO mode otherwise sdio cmd5 won't work */
|
|
setbits_le32(&host->base->sdc_cfg, SDC_CFG_SDIO);
|
|
|
|
/* disable detecting SDIO device interrupt function */
|
|
clrbits_le32(&host->base->sdc_cfg, SDC_CFG_SDIOIDE);
|
|
|
|
/* Configure to default data timeout */
|
|
clrsetbits_le32(&host->base->sdc_cfg, SDC_CFG_DTOC_M,
|
|
3 << SDC_CFG_DTOC_S);
|
|
|
|
if (host->dev_comp->stop_clk_fix) {
|
|
clrbits_le32(&host->base->sdc_fifo_cfg,
|
|
SDC_FIFO_CFG_WRVALIDSEL);
|
|
clrbits_le32(&host->base->sdc_fifo_cfg,
|
|
SDC_FIFO_CFG_RDVALIDSEL);
|
|
}
|
|
|
|
host->def_tune_para.iocon = readl(&host->base->msdc_iocon);
|
|
host->def_tune_para.pad_tune = readl(&host->base->pad_tune);
|
|
}
|
|
|
|
static void msdc_ungate_clock(struct msdc_host *host)
|
|
{
|
|
clk_enable(&host->src_clk);
|
|
clk_enable(&host->h_clk);
|
|
if (host->src_clk_cg.dev)
|
|
clk_enable(&host->src_clk_cg);
|
|
}
|
|
|
|
static int msdc_drv_probe(struct udevice *dev)
|
|
{
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc_config *cfg = &plat->cfg;
|
|
|
|
cfg->name = dev->name;
|
|
|
|
host->dev_comp = (struct msdc_compatible *)dev_get_driver_data(dev);
|
|
|
|
host->src_clk_freq = clk_get_rate(&host->src_clk);
|
|
|
|
if (host->dev_comp->clk_div_bits == 8)
|
|
cfg->f_min = host->src_clk_freq / (4 * 255);
|
|
else
|
|
cfg->f_min = host->src_clk_freq / (4 * 4095);
|
|
|
|
cfg->f_max = host->src_clk_freq;
|
|
|
|
cfg->b_max = 1024;
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
host->mmc = &plat->mmc;
|
|
host->timeout_ns = 100000000;
|
|
host->timeout_clks = 3 * (1 << SCLK_CYCLES_SHIFT);
|
|
|
|
#ifdef CONFIG_PINCTRL
|
|
pinctrl_select_state(dev, "default");
|
|
#endif
|
|
|
|
msdc_ungate_clock(host);
|
|
msdc_init_hw(host);
|
|
|
|
upriv->mmc = &plat->mmc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msdc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
struct msdc_host *host = dev_get_priv(dev);
|
|
struct mmc_config *cfg = &plat->cfg;
|
|
fdt_addr_t base, top_base;
|
|
int ret;
|
|
|
|
base = dev_read_addr(dev);
|
|
if (base == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
host->base = map_sysmem(base, 0);
|
|
|
|
top_base = dev_read_addr_index(dev, 1);
|
|
if (top_base == FDT_ADDR_T_NONE)
|
|
host->top_base = NULL;
|
|
else
|
|
host->top_base = map_sysmem(top_base, 0);
|
|
|
|
ret = mmc_of_parse(dev, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_get_by_name(dev, "source", &host->src_clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_get_by_name(dev, "hclk", &host->h_clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
clk_get_by_name(dev, "source_cg", &host->src_clk_cg); /* optional */
|
|
|
|
#if CONFIG_IS_ENABLED(DM_GPIO)
|
|
gpio_request_by_name(dev, "wp-gpios", 0, &host->gpio_wp, GPIOD_IS_IN);
|
|
gpio_request_by_name(dev, "cd-gpios", 0, &host->gpio_cd, GPIOD_IS_IN);
|
|
#endif
|
|
|
|
host->hs400_ds_delay = dev_read_u32_default(dev, "hs400-ds-delay", 0);
|
|
host->hs200_cmd_int_delay =
|
|
dev_read_u32_default(dev, "cmd_int_delay", 0);
|
|
host->hs200_write_int_delay =
|
|
dev_read_u32_default(dev, "write_int_delay", 0);
|
|
host->latch_ck = dev_read_u32_default(dev, "latch-ck", 0);
|
|
host->r_smpl = dev_read_u32_default(dev, "r_smpl", 0);
|
|
host->builtin_cd = dev_read_u32_default(dev, "builtin-cd", 0);
|
|
host->cd_active_high = dev_read_bool(dev, "cd-active-high");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int msdc_drv_bind(struct udevice *dev)
|
|
{
|
|
struct msdc_plat *plat = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static const struct dm_mmc_ops msdc_ops = {
|
|
.send_cmd = msdc_ops_send_cmd,
|
|
.set_ios = msdc_ops_set_ios,
|
|
.get_cd = msdc_ops_get_cd,
|
|
.get_wp = msdc_ops_get_wp,
|
|
#ifdef MMC_SUPPORTS_TUNING
|
|
.execute_tuning = msdc_execute_tuning,
|
|
#endif
|
|
};
|
|
|
|
static const struct msdc_compatible mt7620_compat = {
|
|
.clk_div_bits = 8,
|
|
.pad_tune0 = false,
|
|
.async_fifo = false,
|
|
.data_tune = false,
|
|
.busy_check = false,
|
|
.stop_clk_fix = false,
|
|
.enhance_rx = false,
|
|
.builtin_pad_ctrl = true,
|
|
.default_pad_dly = true,
|
|
};
|
|
|
|
static const struct msdc_compatible mt7622_compat = {
|
|
.clk_div_bits = 12,
|
|
.pad_tune0 = true,
|
|
.async_fifo = true,
|
|
.data_tune = true,
|
|
.busy_check = true,
|
|
.stop_clk_fix = true,
|
|
};
|
|
|
|
static const struct msdc_compatible mt7623_compat = {
|
|
.clk_div_bits = 12,
|
|
.pad_tune0 = true,
|
|
.async_fifo = true,
|
|
.data_tune = true,
|
|
.busy_check = false,
|
|
.stop_clk_fix = false,
|
|
.enhance_rx = false
|
|
};
|
|
|
|
static const struct msdc_compatible mt8512_compat = {
|
|
.clk_div_bits = 12,
|
|
.pad_tune0 = true,
|
|
.async_fifo = true,
|
|
.data_tune = true,
|
|
.busy_check = true,
|
|
.stop_clk_fix = true,
|
|
};
|
|
|
|
static const struct msdc_compatible mt8516_compat = {
|
|
.clk_div_bits = 12,
|
|
.pad_tune0 = true,
|
|
.async_fifo = true,
|
|
.data_tune = true,
|
|
.busy_check = true,
|
|
.stop_clk_fix = true,
|
|
};
|
|
|
|
static const struct msdc_compatible mt8183_compat = {
|
|
.clk_div_bits = 12,
|
|
.pad_tune0 = true,
|
|
.async_fifo = true,
|
|
.data_tune = true,
|
|
.busy_check = true,
|
|
.stop_clk_fix = true,
|
|
};
|
|
|
|
static const struct udevice_id msdc_ids[] = {
|
|
{ .compatible = "mediatek,mt7620-mmc", .data = (ulong)&mt7620_compat },
|
|
{ .compatible = "mediatek,mt7622-mmc", .data = (ulong)&mt7622_compat },
|
|
{ .compatible = "mediatek,mt7623-mmc", .data = (ulong)&mt7623_compat },
|
|
{ .compatible = "mediatek,mt8512-mmc", .data = (ulong)&mt8512_compat },
|
|
{ .compatible = "mediatek,mt8516-mmc", .data = (ulong)&mt8516_compat },
|
|
{ .compatible = "mediatek,mt8183-mmc", .data = (ulong)&mt8183_compat },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(mtk_sd_drv) = {
|
|
.name = "mtk_sd",
|
|
.id = UCLASS_MMC,
|
|
.of_match = msdc_ids,
|
|
.of_to_plat = msdc_of_to_plat,
|
|
.bind = msdc_drv_bind,
|
|
.probe = msdc_drv_probe,
|
|
.ops = &msdc_ops,
|
|
.plat_auto = sizeof(struct msdc_plat),
|
|
.priv_auto = sizeof(struct msdc_host),
|
|
};
|