mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-24 08:22:14 +00:00
b2412dd5de
This board is useful for benchmarking overall U-Boot performance. Enable the bootstage feature so we get a report. Since this returns to the boot rom before finishing executing board_init_r() in SPL, add a few bootstage calls so that we can collect timing from TPL. For the stash region, use a portion of SRAM, 64KB below the stack top. This allows the TPL image to be up to nearly 120KB (it is typically about 64KB). SPL normally runs from SDRAM at 0, so can use the same stash region. Signed-off-by: Simon Glass <sjg@chromium.org>
114 lines
2.9 KiB
Text
114 lines
2.9 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_SKIP_LOWLEVEL_INIT=y
|
|
CONFIG_COUNTER_FREQUENCY=24000000
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_TEXT_BASE=0x00200000
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_ENV_SIZE=0x8000
|
|
CONFIG_ENV_OFFSET=0x3F8000
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
|
|
CONFIG_ROCKCHIP_RK3399=y
|
|
CONFIG_TARGET_ROCKPRO64_RK3399=y
|
|
CONFIG_BOOTSTAGE_STASH_ADDR=0xff8e0000
|
|
CONFIG_DEBUG_UART_BASE=0xFF1A0000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_SPL_SPI_FLASH_SUPPORT=y
|
|
CONFIG_SPL_SPI=y
|
|
CONFIG_SYS_LOAD_ADDR=0x800800
|
|
CONFIG_DEBUG_UART=y
|
|
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
|
|
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
|
|
CONFIG_BOOTSTAGE=y
|
|
CONFIG_SPL_BOOTSTAGE=y
|
|
CONFIG_TPL_BOOTSTAGE=y
|
|
CONFIG_BOOTSTAGE_REPORT=y
|
|
CONFIG_SPL_BOOTSTAGE_RECORD_COUNT=10
|
|
CONFIG_BOOTSTAGE_STASH=y
|
|
CONFIG_USE_PREBOOT=y
|
|
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_MISC_INIT_R=y
|
|
CONFIG_SPL_MAX_SIZE=0x2e000
|
|
CONFIG_SPL_PAD_TO=0x7f8000
|
|
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
|
|
CONFIG_SPL_BSS_START_ADDR=0x400000
|
|
CONFIG_SPL_BSS_MAX_SIZE=0x2000
|
|
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
|
|
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
|
|
CONFIG_SPL_STACK=0x400000
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
|
|
CONFIG_SPL_SPI_LOAD=y
|
|
CONFIG_TPL=y
|
|
CONFIG_CMD_BOOTZ=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_PCI=y
|
|
CONFIG_CMD_USB=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_BOOTSTAGE=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_SATA=y
|
|
CONFIG_SCSI_AHCI=y
|
|
CONFIG_AHCI_PCI=y
|
|
CONFIG_SATA_SIL=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_LED=y
|
|
CONFIG_LED_GPIO=y
|
|
CONFIG_MISC=y
|
|
CONFIG_ROCKCHIP_EFUSE=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_MMC_SDHCI=y
|
|
CONFIG_MMC_SDHCI_ROCKCHIP=y
|
|
CONFIG_SF_DEFAULT_BUS=1
|
|
CONFIG_SPI_FLASH_GIGADEVICE=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_NVME_PCI=y
|
|
CONFIG_PCI=y
|
|
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
|
|
CONFIG_PHY_ROCKCHIP_TYPEC=y
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_REGULATOR_PWM=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_RAM_ROCKCHIP_LPDDR4=y
|
|
CONFIG_DM_RESET=y
|
|
CONFIG_DM_RNG=y
|
|
CONFIG_RNG_ROCKCHIP=y
|
|
CONFIG_SCSI=y
|
|
CONFIG_DM_SCSI=y
|
|
CONFIG_BAUDRATE=1500000
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYS_NS16550_MEM32=y
|
|
CONFIG_ROCKCHIP_SPI=y
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_XHCI_HCD=y
|
|
CONFIG_USB_XHCI_DWC3=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_EHCI_GENERIC=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_OHCI_GENERIC=y
|
|
CONFIG_USB_DWC3=y
|
|
CONFIG_USB_DWC3_GENERIC=y
|
|
CONFIG_USB_KEYBOARD=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_ASIX88179=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_RTL8152=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_DISPLAY=y
|
|
CONFIG_VIDEO_ROCKCHIP=y
|
|
CONFIG_DISPLAY_ROCKCHIP_HDMI=y
|
|
CONFIG_SPL_TINY_MEMSET=y
|
|
CONFIG_ERRNO_STR=y
|