mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-29 14:33:08 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
245 lines
9.2 KiB
C
245 lines
9.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Faraday FTSDC010 Secure Digital Memory Card Host Controller
|
|
*
|
|
* Copyright (C) 2011 Andes Technology Corporation
|
|
* Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
|
|
*/
|
|
|
|
#ifndef __FTSDC010_H
|
|
#define __FTSDC010_H
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
/* sd controller register */
|
|
struct ftsdc010_mmc {
|
|
unsigned int cmd; /* 0x00 - command reg */
|
|
unsigned int argu; /* 0x04 - argument reg */
|
|
unsigned int rsp0; /* 0x08 - response reg0 */
|
|
unsigned int rsp1; /* 0x0c - response reg1 */
|
|
unsigned int rsp2; /* 0x10 - response reg2 */
|
|
unsigned int rsp3; /* 0x14 - response reg3 */
|
|
unsigned int rsp_cmd; /* 0x18 - responded cmd reg */
|
|
unsigned int dcr; /* 0x1c - data control reg */
|
|
unsigned int dtr; /* 0x20 - data timer reg */
|
|
unsigned int dlr; /* 0x24 - data length reg */
|
|
unsigned int status; /* 0x28 - status reg */
|
|
unsigned int clr; /* 0x2c - clear reg */
|
|
unsigned int int_mask; /* 0x30 - intrrupt mask reg */
|
|
unsigned int pcr; /* 0x34 - power control reg */
|
|
unsigned int ccr; /* 0x38 - clock contorl reg */
|
|
unsigned int bwr; /* 0x3c - bus width reg */
|
|
unsigned int dwr; /* 0x40 - data window reg */
|
|
#ifndef CONFIG_FTSDC010_SDIO
|
|
unsigned int feature; /* 0x44 - feature reg */
|
|
unsigned int rev; /* 0x48 - revision reg */
|
|
#else
|
|
unsigned int mmc_intr_time; /* 0x44 - MMC int resp time reg */
|
|
unsigned int gpo; /* 0x48 - gerenal purpose output */
|
|
unsigned int reserved[8]; /* 0x50 - 0x68 reserved */
|
|
unsigned int sdio_ctrl1; /* 0x6c - SDIO control reg 1 */
|
|
unsigned int sdio_ctrl2; /* 0x70 - SDIO control reg 2 */
|
|
unsigned int sdio_status; /* 0x74 - SDIO status regi */
|
|
unsigned int reserved1[9]; /* 0x78 - 0x98 reserved */
|
|
unsigned int feature; /* 0x9c - feature reg */
|
|
unsigned int rev; /* 0xa0 - revision reg */
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
};
|
|
|
|
struct mmc_host {
|
|
struct ftsdc010_mmc *reg;
|
|
unsigned int version; /* SDHCI spec. version */
|
|
unsigned int clock; /* Current clock (MHz) */
|
|
unsigned int fifo_len; /* bytes */
|
|
unsigned int last_opcode; /* Last OP Code */
|
|
unsigned int card_type; /* Card type */
|
|
};
|
|
|
|
/* functions */
|
|
int ftsdc010_mmc_init(int dev_index);
|
|
|
|
#endif /* __ASSEMBLY__ */
|
|
|
|
/* global defines */
|
|
#define FTSDC010_CMD_RETRY 0x100000
|
|
#define FTSDC010_PIO_RETRY 100 /* pio retry times */
|
|
#define FTSDC010_DELAY_UNIT 100 /* 100 us */
|
|
|
|
/* define from Linux kernel - include/linux/mmc/card.h */
|
|
#define MMC_TYPE_SDIO 2 /* SDIO card */
|
|
|
|
/* define for mmc layer */
|
|
#define MMC_DATA_BOTH_DIR (MMC_DATA_WRITE | MMC_DATA_READ)
|
|
|
|
/* this part is strange */
|
|
#define FTSDC010_SDIO_CTRL1_REG 0x0000006C
|
|
#define FTSDC010_SDIO_CTRL2_REG 0x0000006C
|
|
#define FTSDC010_SDIO_STATUS_REG 0x00000070
|
|
|
|
/* 0x00 - command register */
|
|
#define FTSDC010_CMD_IDX(x) (((x) & 0x3f) << 0)
|
|
#define FTSDC010_CMD_NEED_RSP (1 << 6)
|
|
#define FTSDC010_CMD_LONG_RSP (1 << 7)
|
|
#define FTSDC010_CMD_APP_CMD (1 << 8)
|
|
#define FTSDC010_CMD_CMD_EN (1 << 9)
|
|
#define FTSDC010_CMD_SDC_RST (1 << 10)
|
|
#define FTSDC010_CMD_MMC_INT_STOP (1 << 11)
|
|
|
|
/* 0x18 - responded command register */
|
|
#define FTSDC010_RSP_CMD_IDX(x) (((x) >> 0) & 0x3f)
|
|
#define FTSDC010_RSP_CMD_APP (1 << 6)
|
|
|
|
/* 0x1c - data control register */
|
|
#define FTSDC010_DCR_BLK_SIZE(x) (((x) & 0xf) << 0)
|
|
#define FTSDC010_DCR_DATA_WRITE (1 << 4)
|
|
#define FTSDC010_DCR_DMA_EN (1 << 5)
|
|
#define FTSDC010_DCR_DATA_EN (1 << 6)
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
#define FTSDC010_DCR_FIFOTH (1 << 7)
|
|
#define FTSDC010_DCR_DMA_TYPE(x) (((x) & 0x3) << 8)
|
|
#define FTSDC010_DCR_FIFO_RST (1 << 10)
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
|
|
#define FTSDC010_DCR_DMA_TYPE_1 0x0 /* Single r/w */
|
|
#define FTSDC010_DCR_DMA_TYPE_4 0x1 /* Burst 4 r/w */
|
|
#define FTSDC010_DCR_DMA_TYPE_8 0x2 /* Burst 8 r/w */
|
|
|
|
#define FTSDC010_DCR_BLK_BYTES(x) (ffs(x) - 1) /* 1B - 2048B */
|
|
|
|
/* CPRM related define */
|
|
#define FTSDC010_CPRM_DATA_CHANGE_ENDIAN_EN 0x000008
|
|
#define FTSDC010_CPRM_DATA_SWAP_HL_EN 0x000010
|
|
|
|
/* 0x28 - status register */
|
|
#define FTSDC010_STATUS_RSP_CRC_FAIL (1 << 0)
|
|
#define FTSDC010_STATUS_DATA_CRC_FAIL (1 << 1)
|
|
#define FTSDC010_STATUS_RSP_TIMEOUT (1 << 2)
|
|
#define FTSDC010_STATUS_DATA_TIMEOUT (1 << 3)
|
|
#define FTSDC010_STATUS_RSP_CRC_OK (1 << 4)
|
|
#define FTSDC010_STATUS_DATA_CRC_OK (1 << 5)
|
|
#define FTSDC010_STATUS_CMD_SEND (1 << 6)
|
|
#define FTSDC010_STATUS_DATA_END (1 << 7)
|
|
#define FTSDC010_STATUS_FIFO_URUN (1 << 8)
|
|
#define FTSDC010_STATUS_FIFO_ORUN (1 << 9)
|
|
#define FTSDC010_STATUS_CARD_CHANGE (1 << 10)
|
|
#define FTSDC010_STATUS_CARD_DETECT (1 << 11)
|
|
#define FTSDC010_STATUS_WRITE_PROT (1 << 12)
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
#define FTSDC010_STATUS_CP_READY (1 << 13) /* reserved ? */
|
|
#define FTSDC010_STATUS_CP_BUF_READY (1 << 14) /* reserved ? */
|
|
#define FTSDC010_STATUS_PLAIN_TEXT_READY (1 << 15) /* reserved ? */
|
|
#define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */
|
|
#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
#define FTSDC010_STATUS_RSP_ERROR \
|
|
(FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
|
|
#define FTSDC010_STATUS_RSP_MASK \
|
|
(FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
|
|
#define FTSDC010_STATUS_DATA_ERROR \
|
|
(FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
|
|
#define FTSDC010_STATUS_DATA_MASK \
|
|
(FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
|
|
| FTSDC010_STATUS_DATA_END)
|
|
|
|
/* 0x2c - clear register */
|
|
#define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0)
|
|
#define FTSDC010_CLR_DATA_CRC_FAIL (1 << 1)
|
|
#define FTSDC010_CLR_RSP_TIMEOUT (1 << 2)
|
|
#define FTSDC010_CLR_DATA_TIMEOUT (1 << 3)
|
|
#define FTSDC010_CLR_RSP_CRC_OK (1 << 4)
|
|
#define FTSDC010_CLR_DATA_CRC_OK (1 << 5)
|
|
#define FTSDC010_CLR_CMD_SEND (1 << 6)
|
|
#define FTSDC010_CLR_DATA_END (1 << 7)
|
|
#define FTSDC010_STATUS_FIFO_URUN (1 << 8) /* reserved ? */
|
|
#define FTSDC010_STATUS_FIFO_ORUN (1 << 9) /* reserved ? */
|
|
#define FTSDC010_CLR_CARD_CHANGE (1 << 10)
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
#define FTSDC010_CLR_SDIO_IRPT (1 << 16)
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
|
|
/* 0x30 - interrupt mask register */
|
|
#define FTSDC010_INT_MASK_RSP_CRC_FAIL (1 << 0)
|
|
#define FTSDC010_INT_MASK_DATA_CRC_FAIL (1 << 1)
|
|
#define FTSDC010_INT_MASK_RSP_TIMEOUT (1 << 2)
|
|
#define FTSDC010_INT_MASK_DATA_TIMEOUT (1 << 3)
|
|
#define FTSDC010_INT_MASK_RSP_CRC_OK (1 << 4)
|
|
#define FTSDC010_INT_MASK_DATA_CRC_OK (1 << 5)
|
|
#define FTSDC010_INT_MASK_CMD_SEND (1 << 6)
|
|
#define FTSDC010_INT_MASK_DATA_END (1 << 7)
|
|
#define FTSDC010_INT_MASK_FIFO_URUN (1 << 8)
|
|
#define FTSDC010_INT_MASK_FIFO_ORUN (1 << 9)
|
|
#define FTSDC010_INT_MASK_CARD_CHANGE (1 << 10)
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
#define FTSDC010_INT_MASK_CP_READY (1 << 13)
|
|
#define FTSDC010_INT_MASK_CP_BUF_READY (1 << 14)
|
|
#define FTSDC010_INT_MASK_PLAIN_TEXT_READY (1 << 15)
|
|
#define FTSDC010_INT_MASK_SDIO_IRPT (1 << 16)
|
|
#define FTSDC010_STATUS_DATA0_STATUS (1 << 17)
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
|
|
/* ? */
|
|
#define FTSDC010_CARD_INSERT 0x0
|
|
#define FTSDC010_CARD_REMOVE FTSDC010_STATUS_REG_CARD_DETECT
|
|
|
|
/* 0x34 - power control register */
|
|
#define FTSDC010_PCR_POWER(x) (((x) & 0xf) << 0)
|
|
#define FTSDC010_PCR_POWER_ON (1 << 4)
|
|
|
|
/* 0x38 - clock control register */
|
|
#define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0)
|
|
#define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */
|
|
#define FTSDC010_CCR_CLK_DIS (1 << 8)
|
|
#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */
|
|
|
|
/* card type */
|
|
#define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE
|
|
#define FTSDC010_CARD_TYPE_MMC 0x0
|
|
|
|
/* 0x3c - bus width register */
|
|
#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */
|
|
#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */
|
|
#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */
|
|
#define FTSDC010_BWR_MODE_MASK (7 << 0)
|
|
#define FTSDC010_BWR_MODE_SHIFT (0)
|
|
#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */
|
|
#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */
|
|
#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */
|
|
#define FTSDC010_BWR_CAPS_MASK (3 << 3)
|
|
#define FTSDC010_BWR_CAPS_SHIFT (3)
|
|
#define FTSDC010_BWR_CARD_DETECT (1 << 5)
|
|
|
|
/* 0x44 or 0x9c - feature register */
|
|
#define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff)
|
|
#define FTSDC010_FEATURE_CPRM_FUNCTION (1 << 8)
|
|
|
|
#define FTSDC010_FIFO_DEPTH_4 0x04
|
|
#define FTSDC010_FIFO_DEPTH_8 0x08
|
|
#define FTSDC010_FIFO_DEPTH_16 0x10
|
|
|
|
/* 0x48 or 0xa0 - revision register */
|
|
#define FTSDC010_REV_REVISION(x) (((x) & 0xff) >> 0)
|
|
#define FTSDC010_REV_MINOR(x) (((x) & 0xff00) >> 8)
|
|
#define FTSDC010_REV_MAJOR(x) (((x) & 0xffff0000) >> 16)
|
|
|
|
#ifdef CONFIG_FTSDC010_SDIO
|
|
/* 0x44 - general purpose output */
|
|
#define FTSDC010_GPO_PORT(x) (((x) & 0xf) << 0)
|
|
|
|
/* 0x6c - sdio control register 1 */
|
|
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_SIZE(x) (((x) & 0xfff) << 0)
|
|
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE (1 << 12)
|
|
#define FTSDC010_SDIO_CTRL1_READ_WAIT_EN (1 << 13)
|
|
#define FTSDC010_SDIO_CTRL1_SDIO_ENABLE (1 << 14)
|
|
#define FTSDC010_SDIO_CTRL1_SDIO_BLK_NO(x) (((x) & 0x1ff) << 15)
|
|
|
|
/* 0x70 - sdio control register 2 */
|
|
#define FTSDC010_SDIO_CTRL2_SUSP_READ_WAIT (1 << 0)
|
|
#define FTSDC010_SDIO_CTRL2_SUSP_CMD_ABORT (1 << 1)
|
|
|
|
/* 0x74 - sdio status register */
|
|
#define FTSDC010_SDIO_STATUS_SDIO_BLK_CNT(x) (((x) >> 0) & 0x1ffff)
|
|
#define FTSDC010_SDIO_STATUS_FIFO_REMAIN_NO(x) (((x) >> 17) & 0xef)
|
|
|
|
#endif /* CONFIG_FTSDC010_SDIO */
|
|
|
|
#endif /* __FTSDC010_H */
|