u-boot/arch/arm/mach-uniphier/ph1-pro4/clkrst_init.c
Masahiro Yamada 1535163a4e ARM: UniPhier: enable xHCI and GIO cores for PH1-Pro4
This is necessary to use the USB 3.0 host controllers on PH1-Pro4.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2015-03-01 00:02:55 +09:00

57 lines
1.3 KiB
C

/*
* Copyright (C) 2011-2015 Panasonic Corporation
* Author: Masahiro Yamada <yamada.m@jp.panasonic.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/io.h>
#include <mach/sc-regs.h>
void clkrst_init(void)
{
u32 tmp;
/* deassert reset */
tmp = readl(SC_RSTCTRL);
#ifdef CONFIG_USB_XHCI_UNIPHIER
tmp |= SC_RSTCTRL_NRST_USB3B0 | SC_RSTCTRL_NRST_USB3C0 |
SC_RSTCTRL_NRST_GIO;
#endif
#ifdef CONFIG_UNIPHIER_ETH
tmp |= SC_RSTCTRL_NRST_ETHER;
#endif
#ifdef CONFIG_USB_EHCI_UNIPHIER
tmp |= SC_RSTCTRL_NRST_STDMAC;
#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_RSTCTRL_NRST_NAND;
#endif
writel(tmp, SC_RSTCTRL);
readl(SC_RSTCTRL); /* dummy read */
#ifdef CONFIG_USB_XHCI_UNIPHIER
tmp = readl(SC_RSTCTRL2);
tmp |= SC_RSTCTRL2_NRST_USB3B1 | SC_RSTCTRL2_NRST_USB3C1;
writel(tmp, SC_RSTCTRL2);
readl(SC_RSTCTRL2); /* dummy read */
#endif
/* privide clocks */
tmp = readl(SC_CLKCTRL);
#ifdef CONFIG_USB_XHCI_UNIPHIER
tmp |= SC_CLKCTRL_CEN_USB31 | SC_CLKCTRL_CEN_USB30 |
SC_CLKCTRL_CEN_GIO;
#endif
#ifdef CONFIG_UNIPHIER_ETH
tmp |= SC_CLKCTRL_CEN_ETHER;
#endif
#ifdef CONFIG_USB_EHCI_UNIPHIER
tmp |= SC_CLKCTRL_CEN_MIO | SC_CLKCTRL_CEN_STDMAC;
#endif
#ifdef CONFIG_NAND_DENALI
tmp |= SC_CLKCTRL_CEN_NAND;
#endif
writel(tmp, SC_CLKCTRL);
readl(SC_CLKCTRL); /* dummy read */
}