mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
440 lines
14 KiB
C
440 lines
14 KiB
C
/*
|
|
* This is the main board level file for the Redwood AMCC board.
|
|
*
|
|
* (C) Copyright 2008
|
|
* Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include "redwood.h"
|
|
#include <asm/ppc4xx.h>
|
|
#include <asm/processor.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
|
|
int compare_to_true(char *str);
|
|
char *remove_l_w_space(char *in_str);
|
|
char *remove_t_w_space(char *in_str);
|
|
int get_console_port(void);
|
|
|
|
static void early_init_EBC(void);
|
|
static int bootdevice_selected(void);
|
|
static void early_reinit_EBC(int);
|
|
static void early_init_UIC(void);
|
|
|
|
/*
|
|
* Define Boot devices
|
|
*/
|
|
#define BOOT_FROM_8BIT_SRAM 0x00
|
|
#define BOOT_FROM_16BIT_SRAM 0x01
|
|
#define BOOT_FROM_32BIT_SRAM 0x02
|
|
#define BOOT_FROM_8BIT_NAND 0x03
|
|
#define BOOT_FROM_16BIT_NOR 0x04
|
|
#define BOOT_DEVICE_UNKNOWN 0xff
|
|
|
|
/*
|
|
* EBC Devices Characteristics
|
|
* Peripheral Bank Access Parameters - EBC_BxAP
|
|
* Peripheral Bank Configuration Register - EBC_BxCR
|
|
*/
|
|
|
|
/*
|
|
* 8 bit width SRAM
|
|
* BU Value
|
|
* BxAP : 0x03800000 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
|
|
* B0CR : 0xff098000 - BAS = ff0 - 100 11 00 0000000000000
|
|
* B2CR : 0xe7098000 - BAS = e70 - 100 11 00 0000000000000
|
|
*/
|
|
#define EBC_BXAP_8BIT_SRAM \
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
#define EBC_BXAP_16BIT_SRAM EBC_BXAP_8BIT_SRAM
|
|
#define EBC_BXAP_32BIT_SRAM EBC_BXAP_8BIT_SRAM
|
|
|
|
/*
|
|
* NAND flash
|
|
* BU Value
|
|
* BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
|
|
* B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
|
|
* B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
|
|
*/
|
|
#define EBC_BXAP_NAND \
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
/*
|
|
* NOR flash
|
|
* BU Value
|
|
* BxAP : 0x048ff240 - 0 00000111 0 00 00 00 00 00 000 0 0 0 0 00000
|
|
* B0CR : 0xff09a000 - BAS = ff0 - 100 11 01 0000000000000
|
|
* B2CR : 0xe709a000 - BAS = e70 - 100 11 01 0000000000000
|
|
*/
|
|
#define EBC_BXAP_NOR \
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(7) | \
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(0) | EBC_BXAP_OEN_ENCODE(0) | \
|
|
EBC_BXAP_WBN_ENCODE(0) | EBC_BXAP_WBF_ENCODE(0) | \
|
|
EBC_BXAP_TH_ENCODE(0) | EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_WRITEONLY | \
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
/*
|
|
* FPGA
|
|
* BU value :
|
|
* B1AP = 0x05895240 - 0 00001011 0 00 10 01 01 01 001 0 0 1 0 00000
|
|
* B1CR = 0xe201a000 - BAS = e20 - 000 11 01 00000000000000
|
|
*/
|
|
#define EBC_BXAP_FPGA \
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(11) | \
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(10) | EBC_BXAP_OEN_ENCODE(1) | \
|
|
EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | \
|
|
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | EBC_BXAP_BEM_RW | \
|
|
EBC_BXAP_PEN_DISABLED
|
|
|
|
#define EBC_BXCR_8BIT_SRAM_CS0 \
|
|
EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_1MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
|
|
|
|
#define EBC_BXCR_32BIT_SRAM_CS0 \
|
|
EBC_BXCR_BAS_ENCODE(0xFFC00000) | EBC_BXCR_BS_1MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
|
|
|
|
#define EBC_BXCR_NAND_CS0 \
|
|
EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
|
|
|
|
#define EBC_BXCR_16BIT_SRAM_CS0 \
|
|
EBC_BXCR_BAS_ENCODE(0xFFE00000) | EBC_BXCR_BS_2MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
|
|
|
|
#define EBC_BXCR_NOR_CS0 \
|
|
EBC_BXCR_BAS_ENCODE(0xFF000000) | EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
|
|
|
|
#define EBC_BXCR_NOR_CS1 \
|
|
EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
|
|
|
|
#define EBC_BXCR_NAND_CS1 \
|
|
EBC_BXCR_BAS_ENCODE(0xE0000000) | EBC_BXCR_BS_128MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
|
|
|
|
#define EBC_BXCR_NAND_CS2 \
|
|
EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_128MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT
|
|
|
|
#define EBC_BXCR_SRAM_CS2 \
|
|
EBC_BXCR_BAS_ENCODE(0xC0000000) | EBC_BXCR_BS_4MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT
|
|
|
|
#define EBC_BXCR_LARGE_FLASH_CS2 \
|
|
EBC_BXCR_BAS_ENCODE(0xE7000000) | EBC_BXCR_BS_16MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
|
|
|
|
#define EBC_BXCR_FPGA_CS3 \
|
|
EBC_BXCR_BAS_ENCODE(0xE2000000) | EBC_BXCR_BS_1MB | \
|
|
EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT
|
|
|
|
/*****************************************************************************
|
|
* UBOOT initiated board specific function calls
|
|
****************************************************************************/
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
int computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
|
|
/*
|
|
* Initialise EBC
|
|
*/
|
|
early_init_EBC();
|
|
|
|
/*
|
|
* Determine which boot device was selected
|
|
*/
|
|
computed_boot_device = bootdevice_selected();
|
|
|
|
/*
|
|
* Reinit EBC based on selected boot device
|
|
*/
|
|
early_reinit_EBC(computed_boot_device);
|
|
|
|
/*
|
|
* Setup for UIC on 460SX redwood board
|
|
*/
|
|
early_init_UIC();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
char buf[64];
|
|
int i = getenv_f("serial#", buf, sizeof(buf));
|
|
|
|
printf("Board: Redwood - AMCC 460SX Reference Board");
|
|
if (i > 0) {
|
|
puts(", serial# ");
|
|
puts(buf);
|
|
}
|
|
putc('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void early_init_EBC(void)
|
|
{
|
|
/*
|
|
* Initialize EBC CONFIG -
|
|
* Keep the Default value, but the bit PDT which has to be set to 1 ?TBC
|
|
* default value :
|
|
* 0x07C00000 - 0 0 000 1 1 1 1 1 0000 0 00000 000000000000
|
|
*/
|
|
mtebc(EBC0_CFG, EBC_CFG_LE_UNLOCK |
|
|
EBC_CFG_PTD_ENABLE |
|
|
EBC_CFG_RTC_16PERCLK |
|
|
EBC_CFG_ATC_PREVIOUS |
|
|
EBC_CFG_DTC_PREVIOUS |
|
|
EBC_CFG_CTC_PREVIOUS |
|
|
EBC_CFG_OEO_PREVIOUS |
|
|
EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | EBC_CFG_PR_16);
|
|
|
|
/*
|
|
* PART 1 : Initialize EBC Bank 3
|
|
* ==============================
|
|
* Bank1 is always associated to the EPLD.
|
|
* It has to be initialized prior to other banks settings computation
|
|
* since some board registers values may be needed to determine the
|
|
* boot type
|
|
*/
|
|
mtebc(PB1AP, EBC_BXAP_FPGA);
|
|
mtebc(PB1CR, EBC_BXCR_FPGA_CS3);
|
|
|
|
}
|
|
|
|
static int bootdevice_selected(void)
|
|
{
|
|
unsigned long sdr0_pinstp;
|
|
unsigned long bootstrap_settings;
|
|
int computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
|
|
/*
|
|
* Determine which boot device was selected
|
|
* =================================================
|
|
*
|
|
* Read Pin Strap Register in PPC460SX
|
|
* Result can either be :
|
|
* - Boot strap = boot from EBC 8bits => Small Flash
|
|
* - Boot strap = boot from PCI
|
|
* - Boot strap = IIC
|
|
* In case of boot from IIC, read Serial Device Strap Register1
|
|
*
|
|
* Result can either be :
|
|
* - Boot from EBC - EBC Bus Width = 8bits => Small Flash
|
|
* - Boot from EBC - EBC Bus Width = 16bits => Large Flash or SRAM
|
|
* - Boot from PCI
|
|
*/
|
|
|
|
/* Read Pin Strap Register in PPC460SX */
|
|
mfsdr(SDR0_PINSTP, sdr0_pinstp);
|
|
bootstrap_settings = sdr0_pinstp & SDR0_PSTRP0_BOOTSTRAP_MASK;
|
|
|
|
switch (bootstrap_settings) {
|
|
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS0:
|
|
/*
|
|
* Boot from SRAM, 8bit width
|
|
*/
|
|
computed_boot_device = BOOT_FROM_8BIT_SRAM;
|
|
break;
|
|
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS1:
|
|
/*
|
|
* Boot from SRAM, 32bit width
|
|
*/
|
|
computed_boot_device = BOOT_FROM_32BIT_SRAM;
|
|
break;
|
|
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS2:
|
|
/*
|
|
* Boot from NAND, 8bit width
|
|
*/
|
|
computed_boot_device = BOOT_FROM_8BIT_NAND;
|
|
break;
|
|
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS4:
|
|
/*
|
|
* Boot from SRAM, 16bit width
|
|
* Boot setting in IIC EEPROM 0x50
|
|
*/
|
|
computed_boot_device = BOOT_FROM_16BIT_SRAM;
|
|
break;
|
|
case SDR0_PSTRP0_BOOTSTRAP_SETTINGS5:
|
|
/*
|
|
* Boot from NOR, 16bit width
|
|
* Boot setting in IIC EEPROM 0x54
|
|
*/
|
|
computed_boot_device = BOOT_FROM_16BIT_NOR;
|
|
break;
|
|
default:
|
|
/* should not be */
|
|
computed_boot_device = BOOT_DEVICE_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return computed_boot_device;
|
|
}
|
|
|
|
static void early_reinit_EBC(int computed_boot_device)
|
|
{
|
|
/*
|
|
* Compute EBC settings depending on selected boot device
|
|
* ======================================================
|
|
*
|
|
* Resulting EBC init will be among following configurations :
|
|
*
|
|
* - Boot from EBC 8bits => boot from Small Flash selected
|
|
* EBC-CS0 = Small Flash
|
|
* EBC-CS2 = Large Flash and SRAM
|
|
*
|
|
* - Boot from EBC 16bits => boot from Large Flash or SRAM
|
|
* EBC-CS0 = Large Flash or SRAM
|
|
* EBC-CS2 = Small Flash
|
|
*
|
|
* - Boot from PCI
|
|
* EBC-CS0 = not initialized to avoid address contention
|
|
* EBC-CS2 = same as boot from Small Flash selected
|
|
*/
|
|
|
|
unsigned long ebc0_cs0_bxap_value = 0, ebc0_cs0_bxcr_value = 0;
|
|
unsigned long ebc0_cs1_bxap_value = 0, ebc0_cs1_bxcr_value = 0;
|
|
unsigned long ebc0_cs2_bxap_value = 0, ebc0_cs2_bxcr_value = 0;
|
|
|
|
switch (computed_boot_device) {
|
|
/*-------------------------------------------------------------------*/
|
|
case BOOT_FROM_8BIT_SRAM:
|
|
/*-------------------------------------------------------------------*/
|
|
ebc0_cs0_bxap_value = EBC_BXAP_8BIT_SRAM;
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_8BIT_SRAM_CS0;
|
|
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
|
|
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
|
|
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
|
|
break;
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
case BOOT_FROM_16BIT_SRAM:
|
|
/*-------------------------------------------------------------------*/
|
|
ebc0_cs0_bxap_value = EBC_BXAP_16BIT_SRAM;
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_16BIT_SRAM_CS0;
|
|
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
|
|
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
|
|
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
|
|
break;
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
case BOOT_FROM_32BIT_SRAM:
|
|
/*-------------------------------------------------------------------*/
|
|
ebc0_cs0_bxap_value = EBC_BXAP_32BIT_SRAM;
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_32BIT_SRAM_CS0;
|
|
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
|
|
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
|
|
ebc0_cs2_bxap_value = EBC_BXAP_NAND;
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_NAND_CS2;
|
|
break;
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
case BOOT_FROM_16BIT_NOR:
|
|
/*-------------------------------------------------------------------*/
|
|
ebc0_cs0_bxap_value = EBC_BXAP_NOR;
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_NOR_CS0;
|
|
ebc0_cs1_bxap_value = EBC_BXAP_NAND;
|
|
ebc0_cs1_bxcr_value = EBC_BXCR_NAND_CS1;
|
|
ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
|
|
break;
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
case BOOT_FROM_8BIT_NAND:
|
|
/*-------------------------------------------------------------------*/
|
|
ebc0_cs0_bxap_value = EBC_BXAP_NAND;
|
|
ebc0_cs0_bxcr_value = EBC_BXCR_NAND_CS0;
|
|
ebc0_cs1_bxap_value = EBC_BXAP_NOR;
|
|
ebc0_cs1_bxcr_value = EBC_BXCR_NOR_CS1;
|
|
ebc0_cs2_bxap_value = EBC_BXAP_32BIT_SRAM;
|
|
ebc0_cs2_bxcr_value = EBC_BXCR_SRAM_CS2;
|
|
break;
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
default:
|
|
/*-------------------------------------------------------------------*/
|
|
/* BOOT_DEVICE_UNKNOWN */
|
|
break;
|
|
}
|
|
|
|
mtebc(PB0AP, ebc0_cs0_bxap_value);
|
|
mtebc(PB0CR, ebc0_cs0_bxcr_value);
|
|
mtebc(PB1AP, ebc0_cs1_bxap_value);
|
|
mtebc(PB1CR, ebc0_cs1_bxcr_value);
|
|
mtebc(PB2AP, ebc0_cs2_bxap_value);
|
|
mtebc(PB2CR, ebc0_cs2_bxcr_value);
|
|
}
|
|
|
|
static void early_init_UIC(void)
|
|
{
|
|
/*
|
|
* Initialise UIC registers. Clear all interrupts. Disable all
|
|
* interrupts.
|
|
* Set critical interrupt values. Set interrupt polarities. Set
|
|
* interrupt trigger levels. Make bit 0 High priority. Clear all
|
|
* interrupts again.
|
|
*/
|
|
mtdcr(UIC3SR, 0xffffffff); /* Clear all interrupts */
|
|
mtdcr(UIC3ER, 0x00000000); /* disable all interrupts */
|
|
mtdcr(UIC3CR, 0x00000000); /* Set Critical / Non Critical
|
|
* interrupts */
|
|
mtdcr(UIC3PR, 0xffffffff); /* Set Interrupt Polarities */
|
|
mtdcr(UIC3TR, 0x001fffff); /* Set Interrupt Trigger Levels */
|
|
mtdcr(UIC3VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC3SR, 0xffffffff); /* clear all interrupts */
|
|
|
|
mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */
|
|
mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */
|
|
mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical
|
|
* interrupts */
|
|
mtdcr(UIC2PR, 0xebebebff); /* Set Interrupt Polarities */
|
|
mtdcr(UIC2TR, 0x74747400); /* Set Interrupt Trigger Levels */
|
|
mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */
|
|
|
|
mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */
|
|
mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */
|
|
mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical
|
|
* interrupts */
|
|
mtdcr(UIC1PR, 0xffffffff); /* Set Interrupt Polarities */
|
|
mtdcr(UIC1TR, 0x001fc0ff); /* Set Interrupt Trigger Levels */
|
|
mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */
|
|
|
|
mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all interrupts excepted
|
|
* cascade to be checked */
|
|
mtdcr(UIC0CR, 0x00104001); /* Set Critical / Non Critical
|
|
* interrupts */
|
|
mtdcr(UIC0PR, 0xffffffff); /* Set Interrupt Polarities */
|
|
mtdcr(UIC0TR, 0x000f003c); /* Set Interrupt Trigger Levels */
|
|
mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */
|
|
mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */
|
|
|
|
}
|