mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 17:10:11 +00:00
4024006e52
This adds a document for tphy which supports physical layer functionality for a number of controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
86 lines
2.6 KiB
Text
86 lines
2.6 KiB
Text
MediaTek T-PHY binding
|
|
--------------------------
|
|
|
|
T-phy controller supports physical layer functionality for a number of
|
|
controllers on MediaTek SoCs, such as, USB2.0, USB3.0, PCIe, and SATA.
|
|
|
|
Required properties (controller (parent) node):
|
|
- compatible : should be one of
|
|
"mediatek,generic-tphy-v1"
|
|
- clocks : (deprecated, use port's clocks instead) a list of phandle +
|
|
clock-specifier pairs, one for each entry in clock-names
|
|
- clock-names : (deprecated, use port's one instead) must contain
|
|
"u3phya_ref": for reference clock of usb3.0 analog phy.
|
|
|
|
Required nodes : a sub-node is required for each port the controller
|
|
provides. Address range information including the usual
|
|
'reg' property is used inside these nodes to describe
|
|
the controller's topology.
|
|
|
|
Optional properties (controller (parent) node):
|
|
- reg : offset and length of register shared by multiple ports,
|
|
exclude port's private register.
|
|
- mediatek,src-ref-clk-mhz : frequency of reference clock for slew rate
|
|
calibrate
|
|
- mediatek,src-coef : coefficient for slew rate calibrate, depends on
|
|
SoC process
|
|
|
|
Required properties (port (child) node):
|
|
- reg : address and length of the register set for the port.
|
|
- clocks : a list of phandle + clock-specifier pairs, one for each
|
|
entry in clock-names
|
|
- clock-names : must contain
|
|
"ref": 48M reference clock for HighSpeed analog phy; and 26M
|
|
reference clock for SuperSpeed analog phy, sometimes is
|
|
24M, 25M or 27M, depended on platform.
|
|
- #phy-cells : should be 1 (See second example)
|
|
cell after port phandle is phy type from:
|
|
- PHY_TYPE_USB2
|
|
- PHY_TYPE_USB3
|
|
- PHY_TYPE_PCIE
|
|
- PHY_TYPE_SATA
|
|
|
|
Example:
|
|
|
|
u3phy2: usb-phy@1a244000 {
|
|
compatible = "mediatek,generic-tphy-v1";
|
|
reg = <0x1a244000 0x0700>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
u2port1: usb-phy@1a244800 {
|
|
reg = <0x1a244800 0x0100>;
|
|
clocks = <&topckgen CLK_TOP_USB_PHY48M>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
u3port1: usb-phy@1a244900 {
|
|
reg = <0x1a244900 0x0700>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
Specifying phy control of devices
|
|
---------------------------------
|
|
|
|
Device nodes should specify the configuration required in their "phys"
|
|
property, containing a phandle to the phy port node and a device type;
|
|
phy-names for each port are optional.
|
|
|
|
Example:
|
|
|
|
#include <dt-bindings/phy/phy.h>
|
|
|
|
usb30: usb@11270000 {
|
|
...
|
|
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
|
|
phy-names = "usb2-0", "usb3-0";
|
|
...
|
|
};
|