u-boot/board/a3000/a3000.c
Becky Bruce 9973e3c614 Change initdram() return type to phys_size_t
This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
2008-06-12 08:50:18 +02:00

111 lines
3.1 KiB
C

/*
* (C) Copyright 2001
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
* Modified during 2003 by
* Ken Chou, kchou@ieee.org
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc824x.h>
#include <pci.h>
int checkboard (void)
{
ulong busfreq = get_bus_freq(0);
char buf[32];
printf("Board: A3000 Local Bus at %s MHz\n", strmhz(buf, busfreq));
return 0;
}
phys_size_t initdram (int board_type)
{
long size;
long new_bank0_end;
long mear1;
long emear1;
size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE);
new_bank0_end = size - 1;
mear1 = mpc824x_mpc107_getreg(MEAR1);
emear1 = mpc824x_mpc107_getreg(EMEAR1);
mear1 = (mear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
emear1 = (emear1 & 0xFFFFFF00) |
((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
mpc824x_mpc107_setreg(MEAR1, mear1);
mpc824x_mpc107_setreg(EMEAR1, emear1);
return (size);
}
/*
* Initialize PCI Devices
*/
#ifndef CONFIG_PCI_PNP
static struct pci_config_table pci_a3000_config_table[] = {
/* vendor, device, class */
/* bus, dev, func */
{ PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_83815, PCI_ANY_ID,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, /* dp83815 eth0 divice */
pci_cfgfunc_config_device, { PCI_ENET0_IOADDR,
PCI_ENET0_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x14, PCI_ANY_ID, /* PCI slot1 */
pci_cfgfunc_config_device, { PCI_ENET1_IOADDR,
PCI_ENET1_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x15, PCI_ANY_ID, /* PCI slot2 */
pci_cfgfunc_config_device, { PCI_ENET2_IOADDR,
PCI_ENET2_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_ANY_ID, 0x16, PCI_ANY_ID, /* PCI slot3 */
pci_cfgfunc_config_device, { PCI_ENET3_IOADDR,
PCI_ENET3_MEMADDR,
PCI_COMMAND_IO |
PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER }},
{ }
};
#endif
struct pci_controller hose = {
#ifndef CONFIG_PCI_PNP
config_table: pci_a3000_config_table,
#endif
};
void pci_init_board(void)
{
pci_mpc824x_init(&hose);
}