mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
d98d8bc1c9
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com>
210 lines
5.6 KiB
C
210 lines
5.6 KiB
C
/*
|
|
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* (C) Copyright 2009 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/mx5x_pins.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/gpio.h>
|
|
#include <usb/ehci-fsl.h>
|
|
#include <usb/ulpi.h>
|
|
#include <errno.h>
|
|
|
|
#include "../../drivers/usb/host/ehci.h"
|
|
|
|
/* USB pin configuration */
|
|
#define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \
|
|
PAD_CTL_DRV_HIGH | PAD_CTL_100K_PU | \
|
|
PAD_CTL_HYS_ENABLE | PAD_CTL_PUE_PULL)
|
|
|
|
/*
|
|
* Configure the USB H1 and USB H2 IOMUX
|
|
*/
|
|
void setup_iomux_usb(void)
|
|
{
|
|
setup_iomux_usb_h1();
|
|
|
|
if (machine_is_efikasb())
|
|
setup_iomux_usb_h2();
|
|
|
|
/* USB PHY reset */
|
|
mxc_request_iomux(MX51_PIN_EIM_D27, IOMUX_CONFIG_ALT1);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_D27, PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
|
|
|
|
/* USB HUB reset */
|
|
mxc_request_iomux(MX51_PIN_GPIO1_5, IOMUX_CONFIG_ALT0);
|
|
mxc_iomux_set_pad(MX51_PIN_GPIO1_5, PAD_CTL_PKE_ENABLE |
|
|
PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH);
|
|
|
|
/* WIFI EN (act low) */
|
|
mxc_request_iomux(MX51_PIN_EIM_A22, IOMUX_CONFIG_GPIO);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_A22, 0);
|
|
/* WIFI RESET */
|
|
mxc_request_iomux(MX51_PIN_EIM_A16, IOMUX_CONFIG_GPIO);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_A16, 0);
|
|
/* BT EN (act low) */
|
|
mxc_request_iomux(MX51_PIN_EIM_A17, IOMUX_CONFIG_GPIO);
|
|
mxc_iomux_set_pad(MX51_PIN_EIM_A17, 0);
|
|
}
|
|
|
|
/*
|
|
* Enable devices connected to USB BUSes
|
|
*/
|
|
static void efika_usb_enable_devices(void)
|
|
{
|
|
/* Enable Bluetooth */
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 0);
|
|
udelay(10000);
|
|
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A17), 1);
|
|
|
|
/* Enable WiFi */
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A22), 1);
|
|
udelay(10000);
|
|
|
|
/* Reset the WiFi chip */
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 0);
|
|
udelay(10000);
|
|
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_A16), 1);
|
|
}
|
|
|
|
/*
|
|
* Reset USB HUB (or HUBs on EfikaSB)
|
|
*/
|
|
static void efika_usb_hub_reset(void)
|
|
{
|
|
/* HUB reset */
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
|
|
udelay(1000);
|
|
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 0);
|
|
udelay(1000);
|
|
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_5), 1);
|
|
}
|
|
|
|
/*
|
|
* Reset USB PHY (or PHYs on EfikaSB)
|
|
*/
|
|
static void efika_usb_phy_reset(void)
|
|
{
|
|
/* SMSC 3317 PHY reset */
|
|
gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 0);
|
|
udelay(1000);
|
|
gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_EIM_D27), 1);
|
|
}
|
|
|
|
static void efika_ehci_init(struct usb_ehci *ehci, uint32_t stp_gpio,
|
|
uint32_t alt0, uint32_t alt1)
|
|
{
|
|
int ret;
|
|
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
|
|
|
|
mxc_request_iomux(stp_gpio, alt0);
|
|
mxc_iomux_set_pad(stp_gpio, PAD_CTL_DRV_HIGH |
|
|
PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
|
|
gpio_direction_output(IOMUX_TO_GPIO(stp_gpio), 0);
|
|
udelay(1000);
|
|
gpio_set_value(IOMUX_TO_GPIO(stp_gpio), 1);
|
|
udelay(1000);
|
|
|
|
mxc_request_iomux(stp_gpio, alt1);
|
|
mxc_iomux_set_pad(stp_gpio, USB_PAD_CONFIG);
|
|
udelay(10000);
|
|
|
|
ret = ulpi_init((u32)&ehci->ulpi_viewpoint);
|
|
if (ret) {
|
|
printf("Efika USB ULPI initialization failed\n");
|
|
return;
|
|
}
|
|
|
|
/* ULPI set flags */
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl,
|
|
ULPI_OTG_DP_PULLDOWN | ULPI_OTG_DM_PULLDOWN |
|
|
ULPI_OTG_EXTVBUSIND);
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->function_ctrl,
|
|
ULPI_FC_FULL_SPEED | ULPI_FC_OPMODE_NORMAL |
|
|
ULPI_FC_SUSPENDM);
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->iface_ctrl, 0);
|
|
|
|
/* Set VBus */
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
|
|
ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT);
|
|
|
|
/*
|
|
* Set VBusChrg
|
|
*
|
|
* NOTE: This violates USB specification, but otherwise, USB on Efika
|
|
* doesn't work.
|
|
*/
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
|
|
ULPI_OTG_CHRGVBUS);
|
|
}
|
|
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
/* Init iMX51 EHCI */
|
|
efika_usb_phy_reset();
|
|
efika_usb_hub_reset();
|
|
efika_usb_enable_devices();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void ehci_powerup_fixup(uint32_t *status_reg, uint32_t *reg)
|
|
{
|
|
uint32_t port = OTG_BASE_ADDR + (0x200 * CONFIG_MXC_USB_PORT);
|
|
struct usb_ehci *ehci = (struct usb_ehci *)port;
|
|
struct ulpi_regs *ulpi = (struct ulpi_regs *)0;
|
|
|
|
ulpi_write((u32)&ehci->ulpi_viewpoint, &ulpi->otg_ctrl_set,
|
|
ULPI_OTG_CHRGVBUS);
|
|
|
|
wait_ms(50);
|
|
|
|
/* terminate the reset */
|
|
*reg = ehci_readl(status_reg);
|
|
*reg |= EHCI_PS_PE;
|
|
}
|
|
|
|
void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
if (port == 0) {
|
|
/* Adjust UTMI PHY frequency to 24MHz */
|
|
tmp = readl(OTG_BASE_ADDR + 0x80c);
|
|
tmp = (tmp & ~0x3) | 0x01;
|
|
writel(tmp, OTG_BASE_ADDR + 0x80c);
|
|
} else if (port == 1) {
|
|
efika_ehci_init(ehci, MX51_PIN_USBH1_STP,
|
|
IOMUX_CONFIG_ALT2, IOMUX_CONFIG_ALT0);
|
|
} else if ((port == 2) && machine_is_efikasb()) {
|
|
efika_ehci_init(ehci, MX51_PIN_EIM_A26,
|
|
IOMUX_CONFIG_ALT1, IOMUX_CONFIG_ALT2);
|
|
}
|
|
|
|
if (port)
|
|
mdelay(10);
|
|
}
|