u-boot/drivers/pinctrl/rockchip/pinctrl_rk3188.c
Heiko Stübner 155cd37f2c rockchip: rk3188: Add pinctrl driver
Add a driver which supports pin multiplexing setup for the most commonly
used peripherals.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Kever Yang <kever.yang@rock-chips.com>
2017-03-16 16:03:45 -06:00

611 lines
16 KiB
C

/*
* Pinctrl driver for Rockchip RK3188 SoCs
* Copyright (c) 2016 Heiko Stuebner <heiko@sntech.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <errno.h>
#include <syscon.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/grf_rk3188.h>
#include <asm/arch/hardware.h>
#include <asm/arch/periph.h>
#include <asm/arch/pmu_rk3188.h>
#include <dm/pinctrl.h>
#include <dm/root.h>
DECLARE_GLOBAL_DATA_PTR;
struct rk3188_pinctrl_priv {
struct rk3188_grf *grf;
struct rk3188_pmu *pmu;
int num_banks;
};
/**
* Encode variants of iomux registers into a type variable
*/
#define IOMUX_GPIO_ONLY BIT(0)
/**
* @type: iomux variant using IOMUX_* constants
* @offset: if initialized to -1 it will be autocalculated, by specifying
* an initial offset value the relevant source offset can be reset
* to a new value for autocalculating the following iomux registers.
*/
struct rockchip_iomux {
u8 type;
s16 offset;
};
/**
* @reg: register offset of the gpio bank
* @nr_pins: number of pins in this bank
* @bank_num: number of the bank, to account for holes
* @name: name of the bank
* @iomux: array describing the 4 iomux sources of the bank
*/
struct rockchip_pin_bank {
u16 reg;
u8 nr_pins;
u8 bank_num;
char *name;
struct rockchip_iomux iomux[4];
};
#define PIN_BANK(id, pins, label) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
{ .offset = -1 }, \
}, \
}
#define PIN_BANK_IOMUX_FLAGS(id, pins, label, iom0, iom1, iom2, iom3) \
{ \
.bank_num = id, \
.nr_pins = pins, \
.name = label, \
.iomux = { \
{ .type = iom0, .offset = -1 }, \
{ .type = iom1, .offset = -1 }, \
{ .type = iom2, .offset = -1 }, \
{ .type = iom3, .offset = -1 }, \
}, \
}
#ifndef CONFIG_SPL_BUILD
static struct rockchip_pin_bank rk3188_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_GPIO_ONLY, 0, 0, 0),
PIN_BANK(1, 32, "gpio1"),
PIN_BANK(2, 32, "gpio2"),
PIN_BANK(3, 32, "gpio3"),
};
#endif
static void pinctrl_rk3188_pwm_config(struct rk3188_grf *grf, int pwm_id)
{
switch (pwm_id) {
case PERIPH_ID_PWM0:
rk_clrsetreg(&grf->gpio3d_iomux, GPIO3D3_MASK << GPIO3D3_SHIFT,
GPIO3D3_PWM_0 << GPIO3D3_SHIFT);
break;
case PERIPH_ID_PWM1:
rk_clrsetreg(&grf->gpio3d_iomux, GPIO3D4_MASK << GPIO3D4_SHIFT,
GPIO3D4_PWM_1 << GPIO3D4_SHIFT);
break;
case PERIPH_ID_PWM2:
rk_clrsetreg(&grf->gpio3d_iomux, GPIO3D5_MASK << GPIO3D5_SHIFT,
GPIO3D5_PWM_2 << GPIO3D5_SHIFT);
break;
case PERIPH_ID_PWM3:
rk_clrsetreg(&grf->gpio3d_iomux, GPIO3D6_MASK << GPIO3D6_SHIFT,
GPIO3D6_PWM_3 << GPIO3D6_SHIFT);
break;
default:
debug("pwm id = %d iomux error!\n", pwm_id);
break;
}
}
static void pinctrl_rk3188_i2c_config(struct rk3188_grf *grf,
struct rk3188_pmu *pmu, int i2c_id)
{
switch (i2c_id) {
case PERIPH_ID_I2C0:
rk_clrsetreg(&grf->gpio1d_iomux,
GPIO1D1_MASK << GPIO1D1_SHIFT |
GPIO1D0_MASK << GPIO1D0_SHIFT,
GPIO1D1_I2C0_SCL << GPIO1D1_SHIFT |
GPIO1D0_I2C0_SDA << GPIO1D0_SHIFT);
/* enable new i2c controller */
rk_clrsetreg(&grf->soc_con1, 1 << RKI2C0_SEL_SHIFT,
1 << RKI2C0_SEL_SHIFT);
break;
case PERIPH_ID_I2C1:
rk_clrsetreg(&grf->gpio1d_iomux,
GPIO1D3_MASK << GPIO1D3_SHIFT |
GPIO1D2_MASK << GPIO1D2_SHIFT,
GPIO1D3_I2C1_SCL << GPIO1D2_SHIFT |
GPIO1D2_I2C1_SDA << GPIO1D2_SHIFT);
rk_clrsetreg(&grf->soc_con1, 1 << RKI2C1_SEL_SHIFT,
1 << RKI2C1_SEL_SHIFT);
break;
case PERIPH_ID_I2C2:
rk_clrsetreg(&grf->gpio1d_iomux,
GPIO1D5_MASK << GPIO1D5_SHIFT |
GPIO1D4_MASK << GPIO1D4_SHIFT,
GPIO1D5_I2C2_SCL << GPIO1D5_SHIFT |
GPIO1D4_I2C2_SDA << GPIO1D4_SHIFT);
rk_clrsetreg(&grf->soc_con1, 1 << RKI2C2_SEL_SHIFT,
1 << RKI2C2_SEL_SHIFT);
break;
case PERIPH_ID_I2C3:
rk_clrsetreg(&grf->gpio3b_iomux,
GPIO3B7_MASK << GPIO3B7_SHIFT |
GPIO3B6_MASK << GPIO3B6_SHIFT,
GPIO3B7_I2C3_SCL << GPIO3B7_SHIFT |
GPIO3B6_I2C3_SDA << GPIO3B6_SHIFT);
rk_clrsetreg(&grf->soc_con1, 1 << RKI2C3_SEL_SHIFT,
1 << RKI2C3_SEL_SHIFT);
break;
case PERIPH_ID_I2C4:
rk_clrsetreg(&grf->gpio1d_iomux,
GPIO1D7_MASK << GPIO1D7_SHIFT |
GPIO1D6_MASK << GPIO1D6_SHIFT,
GPIO1D7_I2C4_SCL << GPIO1D7_SHIFT |
GPIO1D6_I2C4_SDA << GPIO1D6_SHIFT);
rk_clrsetreg(&grf->soc_con1, 1 << RKI2C4_SEL_SHIFT,
1 << RKI2C4_SEL_SHIFT);
break;
default:
debug("i2c id = %d iomux error!\n", i2c_id);
break;
}
}
static int pinctrl_rk3188_spi_config(struct rk3188_grf *grf,
enum periph_id spi_id, int cs)
{
switch (spi_id) {
case PERIPH_ID_SPI0:
switch (cs) {
case 0:
rk_clrsetreg(&grf->gpio1a_iomux,
GPIO1A7_MASK << GPIO1A7_SHIFT,
GPIO1A7_SPI0_CSN0 << GPIO1A7_SHIFT);
break;
case 1:
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B7_MASK << GPIO1B7_SHIFT,
GPIO1B7_SPI0_CSN1 << GPIO1B7_SHIFT);
break;
default:
goto err;
}
rk_clrsetreg(&grf->gpio1a_iomux,
GPIO1A4_MASK << GPIO1A4_SHIFT |
GPIO1A5_MASK << GPIO1A5_SHIFT |
GPIO1A6_MASK << GPIO1A6_SHIFT,
GPIO1A4_SPI0_RXD << GPIO1A4_SHIFT |
GPIO1A5_SPI0_TXD << GPIO1A5_SHIFT |
GPIO1A6_SPI0_CLK << GPIO1A6_SHIFT);
break;
case PERIPH_ID_SPI1:
switch (cs) {
case 0:
rk_clrsetreg(&grf->gpio0d_iomux,
GPIO0D7_MASK << GPIO0D7_SHIFT,
GPIO0D7_SPI1_CSN0 << GPIO0D7_SHIFT);
break;
case 1:
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B6_MASK << GPIO1B6_SHIFT,
GPIO1B6_SPI1_CSN1 << GPIO1B6_SHIFT);
break;
default:
goto err;
}
rk_clrsetreg(&grf->gpio0d_iomux,
GPIO0D4_MASK << GPIO0D4_SHIFT |
GPIO0D5_MASK << GPIO0D5_SHIFT |
GPIO0D6_MASK << GPIO0D6_SHIFT,
GPIO0D4_SPI0_RXD << GPIO0D4_SHIFT |
GPIO0D5_SPI1_TXD << GPIO0D5_SHIFT |
GPIO0D6_SPI1_CLK << GPIO0D6_SHIFT);
break;
default:
goto err;
}
return 0;
err:
debug("rkspi: periph%d cs=%d not supported", spi_id, cs);
return -ENOENT;
}
static void pinctrl_rk3188_uart_config(struct rk3188_grf *grf, int uart_id)
{
switch (uart_id) {
case PERIPH_ID_UART0:
rk_clrsetreg(&grf->gpio1a_iomux,
GPIO1A3_MASK << GPIO1A3_SHIFT |
GPIO1A2_MASK << GPIO1A2_SHIFT |
GPIO1A1_MASK << GPIO1A1_SHIFT |
GPIO1A0_MASK << GPIO1A0_SHIFT,
GPIO1A3_UART0_RTS_N << GPIO1A3_SHIFT |
GPIO1A2_UART0_CTS_N << GPIO1A2_SHIFT |
GPIO1A1_UART0_SOUT << GPIO1A1_SHIFT |
GPIO1A0_UART0_SIN << GPIO1A0_SHIFT);
break;
case PERIPH_ID_UART1:
rk_clrsetreg(&grf->gpio1a_iomux,
GPIO1A7_MASK << GPIO1A7_SHIFT |
GPIO1A6_MASK << GPIO1A6_SHIFT |
GPIO1A5_MASK << GPIO1A5_SHIFT |
GPIO1A4_MASK << GPIO1A4_SHIFT,
GPIO1A7_UART1_RTS_N << GPIO1A7_SHIFT |
GPIO1A6_UART1_CTS_N << GPIO1A6_SHIFT |
GPIO1A5_UART1_SOUT << GPIO1A5_SHIFT |
GPIO1A4_UART1_SIN << GPIO1A4_SHIFT);
break;
case PERIPH_ID_UART2:
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B1_MASK << GPIO1B1_SHIFT |
GPIO1B0_MASK << GPIO1B0_SHIFT,
GPIO1B1_UART2_SOUT << GPIO1B1_SHIFT |
GPIO1B0_UART2_SIN << GPIO1B0_SHIFT);
break;
case PERIPH_ID_UART3:
rk_clrsetreg(&grf->gpio1b_iomux,
GPIO1B5_MASK << GPIO1B5_SHIFT |
GPIO1B4_MASK << GPIO1B4_SHIFT |
GPIO1B3_MASK << GPIO1B3_SHIFT |
GPIO1B2_MASK << GPIO1B2_SHIFT,
GPIO1B5_UART3_RTS_N << GPIO1B5_SHIFT |
GPIO1B4_UART3_CTS_N << GPIO1B4_SHIFT |
GPIO1B3_UART3_SOUT << GPIO1B3_SHIFT |
GPIO1B2_UART3_SIN << GPIO1B2_SHIFT);
break;
default:
debug("uart id = %d iomux error!\n", uart_id);
break;
}
}
static void pinctrl_rk3188_sdmmc_config(struct rk3188_grf *grf, int mmc_id)
{
switch (mmc_id) {
case PERIPH_ID_EMMC:
rk_clrsetreg(&grf->soc_con0, 1 << EMMC_FLASH_SEL_SHIFT,
1 << EMMC_FLASH_SEL_SHIFT);
rk_clrsetreg(&grf->gpio0d_iomux,
GPIO0D2_MASK << GPIO0D2_SHIFT |
GPIO0D0_MASK << GPIO0D0_SHIFT,
GPIO0D2_EMMC_CMD << GPIO0D2_SHIFT |
GPIO0D0_EMMC_CLKOUT << GPIO0D0_SHIFT);
break;
case PERIPH_ID_SDCARD:
rk_clrsetreg(&grf->gpio3b_iomux,
GPIO3B0_MASK << GPIO3B0_SHIFT,
GPIO3B0_SDMMC_DETECT_N << GPIO3B0_SHIFT);
rk_clrsetreg(&grf->gpio3a_iomux,
GPIO3A7_MASK << GPIO3A7_SHIFT |
GPIO3A6_MASK << GPIO3A6_SHIFT |
GPIO3A5_MASK << GPIO3A5_SHIFT |
GPIO3A4_MASK << GPIO3A4_SHIFT |
GPIO3A3_MASK << GPIO3A3_SHIFT |
GPIO3A3_MASK << GPIO3A2_SHIFT,
GPIO3A7_SDMMC0_DATA3 << GPIO3A7_SHIFT |
GPIO3A6_SDMMC0_DATA2 << GPIO3A6_SHIFT |
GPIO3A5_SDMMC0_DATA1 << GPIO3A5_SHIFT |
GPIO3A4_SDMMC0_DATA0 << GPIO3A4_SHIFT |
GPIO3A3_SDMMC0_CMD << GPIO3A3_SHIFT |
GPIO3A2_SDMMC0_CLKOUT << GPIO3A2_SHIFT);
break;
default:
debug("mmc id = %d iomux error!\n", mmc_id);
break;
}
}
static int rk3188_pinctrl_request(struct udevice *dev, int func, int flags)
{
struct rk3188_pinctrl_priv *priv = dev_get_priv(dev);
debug("%s: func=%x, flags=%x\n", __func__, func, flags);
switch (func) {
case PERIPH_ID_PWM0:
case PERIPH_ID_PWM1:
case PERIPH_ID_PWM2:
case PERIPH_ID_PWM3:
case PERIPH_ID_PWM4:
pinctrl_rk3188_pwm_config(priv->grf, func);
break;
case PERIPH_ID_I2C0:
case PERIPH_ID_I2C1:
case PERIPH_ID_I2C2:
case PERIPH_ID_I2C3:
case PERIPH_ID_I2C4:
case PERIPH_ID_I2C5:
pinctrl_rk3188_i2c_config(priv->grf, priv->pmu, func);
break;
case PERIPH_ID_SPI0:
case PERIPH_ID_SPI1:
case PERIPH_ID_SPI2:
pinctrl_rk3188_spi_config(priv->grf, func, flags);
break;
case PERIPH_ID_UART0:
case PERIPH_ID_UART1:
case PERIPH_ID_UART2:
case PERIPH_ID_UART3:
case PERIPH_ID_UART4:
pinctrl_rk3188_uart_config(priv->grf, func);
break;
break;
case PERIPH_ID_SDMMC0:
case PERIPH_ID_SDMMC1:
pinctrl_rk3188_sdmmc_config(priv->grf, func);
break;
default:
return -EINVAL;
}
return 0;
}
static int rk3188_pinctrl_get_periph_id(struct udevice *dev,
struct udevice *periph)
{
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
u32 cell[3];
int ret;
ret = fdtdec_get_int_array(gd->fdt_blob, periph->of_offset,
"interrupts", cell, ARRAY_SIZE(cell));
if (ret < 0)
return -EINVAL;
switch (cell[1]) {
case 44:
return PERIPH_ID_SPI0;
case 45:
return PERIPH_ID_SPI1;
case 46:
return PERIPH_ID_SPI2;
case 60:
return PERIPH_ID_I2C0;
case 62: /* Note strange order */
return PERIPH_ID_I2C1;
case 61:
return PERIPH_ID_I2C2;
case 63:
return PERIPH_ID_I2C3;
case 64:
return PERIPH_ID_I2C4;
case 65:
return PERIPH_ID_I2C5;
}
#endif
return -ENOENT;
}
static int rk3188_pinctrl_set_state_simple(struct udevice *dev,
struct udevice *periph)
{
int func;
func = rk3188_pinctrl_get_periph_id(dev, periph);
if (func < 0)
return func;
return rk3188_pinctrl_request(dev, func, 0);
}
#ifndef CONFIG_SPL_BUILD
int rk3188_pinctrl_get_pin_info(struct rk3188_pinctrl_priv *priv,
int banknum, int ind, u32 **addrp, uint *shiftp,
uint *maskp)
{
struct rockchip_pin_bank *bank = &rk3188_pin_banks[banknum];
uint muxnum;
u32 *addr;
for (muxnum = 0; muxnum < 4; muxnum++) {
struct rockchip_iomux *mux = &bank->iomux[muxnum];
if (ind >= 8) {
ind -= 8;
continue;
}
addr = &priv->grf->gpio0c_iomux - 2;
addr += mux->offset;
*shiftp = ind & 7;
*maskp = 3;
*shiftp *= 2;
debug("%s: addr=%p, mask=%x, shift=%x\n", __func__, addr,
*maskp, *shiftp);
*addrp = addr;
return 0;
}
return -EINVAL;
}
static int rk3188_pinctrl_get_gpio_mux(struct udevice *dev, int banknum,
int index)
{
struct rk3188_pinctrl_priv *priv = dev_get_priv(dev);
uint shift;
uint mask;
u32 *addr;
int ret;
ret = rk3188_pinctrl_get_pin_info(priv, banknum, index, &addr, &shift,
&mask);
if (ret)
return ret;
return (readl(addr) & mask) >> shift;
}
static int rk3188_pinctrl_set_pins(struct udevice *dev, int banknum, int index,
int muxval, int flags)
{
struct rk3188_pinctrl_priv *priv = dev_get_priv(dev);
uint shift, ind = index;
uint mask;
u32 *addr;
int ret;
debug("%s: %x %x %x %x\n", __func__, banknum, index, muxval, flags);
ret = rk3188_pinctrl_get_pin_info(priv, banknum, index, &addr, &shift,
&mask);
if (ret)
return ret;
rk_clrsetreg(addr, mask << shift, muxval << shift);
/* Handle pullup/pulldown */
if (flags) {
uint val = 0;
if (flags & (1 << PIN_CONFIG_BIAS_PULL_UP))
val = 1;
else if (flags & (1 << PIN_CONFIG_BIAS_PULL_DOWN))
val = 2;
ind = index >> 3;
if (banknum == 0 && index < 12) {
addr = &priv->pmu->gpio0_p[ind];
shift = (index & 7) * 2;
} else if (banknum == 0 && index >= 12) {
addr = &priv->grf->gpio0_p[ind - 1];
/*
* The bits in the grf-registers have an inverse
* ordering with the lowest pin being in bits 15:14
* and the highest pin in bits 1:0 .
*/
shift = (7 - (index & 7)) * 2;
} else {
addr = &priv->grf->gpio1_p[banknum - 1][ind];
shift = (7 - (index & 7)) * 2;
}
debug("%s: addr=%p, val=%x, shift=%x\n", __func__, addr, val,
shift);
rk_clrsetreg(addr, 3 << shift, val << shift);
}
return 0;
}
static int rk3188_pinctrl_set_state(struct udevice *dev, struct udevice *config)
{
const void *blob = gd->fdt_blob;
int pcfg_node, ret, flags, count, i;
u32 cell[60], *ptr;
debug("%s: %s %s\n", __func__, dev->name, config->name);
ret = fdtdec_get_int_array_count(blob, config->of_offset,
"rockchip,pins", cell,
ARRAY_SIZE(cell));
if (ret < 0) {
debug("%s: bad array %d\n", __func__, ret);
return -EINVAL;
}
count = ret;
for (i = 0, ptr = cell; i < count; i += 4, ptr += 4) {
pcfg_node = fdt_node_offset_by_phandle(blob, ptr[3]);
if (pcfg_node < 0)
return -EINVAL;
flags = pinctrl_decode_pin_config(blob, pcfg_node);
if (flags < 0)
return flags;
ret = rk3188_pinctrl_set_pins(dev, ptr[0], ptr[1], ptr[2],
flags);
if (ret)
return ret;
}
return 0;
}
#endif
static struct pinctrl_ops rk3188_pinctrl_ops = {
#ifndef CONFIG_SPL_BUILD
.set_state = rk3188_pinctrl_set_state,
.get_gpio_mux = rk3188_pinctrl_get_gpio_mux,
#endif
.set_state_simple = rk3188_pinctrl_set_state_simple,
.request = rk3188_pinctrl_request,
.get_periph_id = rk3188_pinctrl_get_periph_id,
};
#ifndef CONFIG_SPL_BUILD
static int rk3188_pinctrl_parse_tables(struct rk3188_pinctrl_priv *priv,
struct rockchip_pin_bank *banks,
int count)
{
struct rockchip_pin_bank *bank;
uint reg, muxnum, banknum;
reg = 0;
for (banknum = 0; banknum < count; banknum++) {
bank = &banks[banknum];
bank->reg = reg;
debug("%s: bank %d, reg %x\n", __func__, banknum, reg * 4);
for (muxnum = 0; muxnum < 4; muxnum++) {
struct rockchip_iomux *mux = &bank->iomux[muxnum];
mux->offset = reg;
reg += 1;
}
}
return 0;
}
#endif
static int rk3188_pinctrl_probe(struct udevice *dev)
{
struct rk3188_pinctrl_priv *priv = dev_get_priv(dev);
int ret = 0;
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
debug("%s: grf=%p, pmu=%p\n", __func__, priv->grf, priv->pmu);
#ifndef CONFIG_SPL_BUILD
ret = rk3188_pinctrl_parse_tables(priv, rk3188_pin_banks,
ARRAY_SIZE(rk3188_pin_banks));
#endif
return ret;
}
static const struct udevice_id rk3188_pinctrl_ids[] = {
{ .compatible = "rockchip,rk3188-pinctrl" },
{ }
};
U_BOOT_DRIVER(pinctrl_rk3188) = {
.name = "rockchip_rk3188_pinctrl",
.id = UCLASS_PINCTRL,
.of_match = rk3188_pinctrl_ids,
.priv_auto_alloc_size = sizeof(struct rk3188_pinctrl_priv),
.ops = &rk3188_pinctrl_ops,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.bind = dm_scan_fdt_dev,
#endif
.probe = rk3188_pinctrl_probe,
};