u-boot/arch/arm/mach-uniphier/pll/pll-init-sld8.c
Masahiro Yamada ea65c98050 ARM: uniphier: drop PH1- prefix from CONFIG options and file names
The current CONFIG names like "CONFIG_ARCH_UNIPHIER_PH1_PRO4" is too
long.  It would not hurt to drop "PH1_" because "UNIPHIER_" already
well specifies the SoC family.  Also, rename files for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2016-03-24 01:42:13 +09:00

205 lines
4.6 KiB
C

/*
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/io.h>
#include "../init.h"
#include "../sc-regs.h"
#include "../sg-regs.h"
static void dpll_init(void)
{
u32 tmp;
/*
* Set DPLL SSC parameters for DPLLCTRL3
* [23] DIVN_TEST 0x1
* [22:16] DIVN 0x50
* [10] FREFSEL_TEST 0x1
* [9:8] FREFSEL 0x2
* [4] ICPD_TEST 0x1
* [3:0] ICPD 0xb
*/
tmp = readl(SC_DPLLCTRL3);
tmp &= ~0x00ff0717;
tmp |= 0x00d0061b;
writel(tmp, SC_DPLLCTRL3);
/*
* Set DPLL SSC parameters for DPLLCTRL
* <-1%> <-2%>
* [29:20] SSC_UPCNT 132 (0x084) 132 (0x084)
* [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6)
*/
tmp = readl(SC_DPLLCTRL);
tmp &= ~0x3ff07fff;
#ifdef CONFIG_DPLL_SSC_RATE_1PER
tmp |= 0x084018bf;
#else
tmp |= 0x084031a6;
#endif
writel(tmp, SC_DPLLCTRL);
/*
* Set DPLL SSC parameters for DPLLCTRL2
* [31:29] SSC_STEP 0
* [27] SSC_REG_REF 1
* [26:20] SSC_M 79 (0x4f)
* [19:0] SSC_K 964689 (0xeb851)
*/
tmp = readl(SC_DPLLCTRL2);
tmp &= ~0xefffffff;
tmp |= 0x0cfeb851;
writel(tmp, SC_DPLLCTRL2);
}
static void upll_init(void)
{
u32 tmp, clk_mode_upll, clk_mode_axosel;
tmp = readl(SG_PINMON0);
clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
tmp = readl(SC_UPLLCTRL);
tmp &= ~0x18000000;
writel(tmp, SC_UPLLCTRL);
if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
/* AXO: 25MHz */
tmp &= ~0x07ffffff;
tmp |= 0x0228f5c0;
} else {
/* AXO: default 24.576MHz */
tmp &= ~0x07ffffff;
tmp |= 0x02328000;
}
}
writel(tmp, SC_UPLLCTRL);
/* set 1 to K_LD(UPLLCTRL.bit[27]) */
tmp |= 0x08000000;
writel(tmp, SC_UPLLCTRL);
/* wait 10 usec */
udelay(10);
/* set 1 to SNRT(UPLLCTRL.bit[28]) */
tmp |= 0x10000000;
writel(tmp, SC_UPLLCTRL);
}
static void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 1 to VPLA27WP and VPLA27WP */
tmp = readl(SC_VPLL27ACTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27BCTRL);
/* Set 0 to VPLA_K_LD and VPLB_K_LD */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
/* AXO: 25MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
writel(tmp, SC_VPLL27BCTRL3);
} else {
/* AXO: default 24.576MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27BCTRL3);
}
/* Set 1 to VPLA_K_LD and VPLB_K_LD */
tmp = readl(SC_VPLL27ACTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* wait 10 usec */
udelay(10);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* set 0 to VPLA27WP and VPLA27WP */
tmp = readl(SC_VPLL27ACTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= ~0x00000001;
writel(tmp, SC_VPLL27BCTRL);
}
int ph1_sld8_pll_init(const struct uniphier_board_data *bd)
{
dpll_init();
upll_init();
vpll_init();
/*
* Wait 500 usec until dpll get stable
* We wait 10 usec in upll_init() and vpll_init()
* so 20 usec can be saved here.
*/
udelay(480);
return 0;
}