u-boot/drivers/phy
Samuel Holland df202d996d phy: sun4i-usb: Do not drive VBUS with external VBUS present
It is possible to use host-side USB with externally-provided VBUS. For
example, some USB OTG cables have an extra power input which powers
both the board and the USB peripheral.

To support this setup, skip enabling the VBUS switch/regulator if VBUS
voltage is already present. This behavior matches the Linux PHY driver.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-04-28 01:30:40 +01:00
..
allwinner phy: sun4i-usb: Do not drive VBUS with external VBUS present 2023-04-28 01:30:40 +01:00
cadence phy: cadence: Sierra: Move the link operations from serdes phy to link device 2022-03-14 12:44:51 -04:00
marvell usb: ehci: ehci-marvell: Update compatible string to official DT bindings 2022-02-17 14:17:07 +01:00
qcom phy: Add support for drivers to enable USB on QCS404 SoC 2022-08-26 10:55:45 -04:00
renesas phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 2023-04-16 16:18:29 +02:00
rockchip drivers: phy: add Innosilicon DSI-DPHY driver 2023-04-21 15:16:01 +08:00
socionext phy: socionext: Add UniPhier USB3 PHY driver 2023-02-22 19:40:11 +01:00
ti phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap 2023-03-29 13:30:29 -04:00
bcm6318-usbh-phy.c phy: bcm63xx: Don't check clk_free 2022-03-30 13:02:55 -04:00
bcm6348-usbh-phy.c phy: bcm63xx: Don't check clk_free 2022-03-30 13:02:55 -04:00
bcm6358-usbh-phy.c
bcm6368-usbh-phy.c phy: bcm63xx: Don't check clk_free 2022-03-30 13:02:55 -04:00
Kconfig phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 2023-04-16 16:18:29 +02:00
keystone-usb-phy.c
Makefile phy: renesas: Add Renesas Ethernet SERDES driver for R-Car S4-8 2023-04-16 16:18:29 +02:00
meson-axg-mipi-dphy.c phy: meson-axg-mipi: Rename "priv_auto_alloc_size" to "priv_auto" 2021-07-27 10:32:09 +02:00
meson-axg-mipi-pcie-analog.c phy: meson-axg-mipi: Access parent ofnode through dev_ofnode() 2021-07-27 10:32:09 +02:00
meson-g12a-usb2.c
meson-g12a-usb3-pcie.c
meson-gxbb-usb2.c
meson-gxl-usb2.c
mt76x8-usb-phy.c
mt7620-usb-phy.c
nop-phy.c phy: nop-phy: Fix phy reset if no reset-gpio defined 2022-03-01 00:21:11 +01:00
omap-usb2-phy.c
phy-ab8500-usb.c Correct SPL uses of USB_MUSB_HOST 2023-02-10 07:41:40 -05:00
phy-bcm-sr-pcie.c
phy-core-mipi-dphy.c
phy-da8xx-usb.c
phy-imx8mq-usb.c phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY 2022-04-12 17:33:56 +02:00
phy-mtk-tphy.c phy: phy-mtk-tphy: add support mt8195 2023-03-02 22:43:43 +01:00
phy-npcm-usb.c phy: nuvoton: add NPCM7xx phy control driver 2022-07-06 14:30:51 -04:00
phy-rcar-gen2.c
phy-rcar-gen3.c
phy-stm32-usbphyc.c phy: usbphyc: use regulator_set_enable_if_allowed for disabling vbus supply 2022-12-12 11:25:19 +01:00
phy-ti-am654.c arm: mach-k3: Remove empty sys_proto.h include 2023-04-24 13:18:48 -04:00
phy-uclass.c phy: Add .set_mode and .set_speed callbacks 2023-04-07 14:23:26 +02:00
phy-zynqmp.c phy: zynqmp: Increase timeout value to 10ms 2022-05-18 13:17:54 +02:00
sandbox-phy.c
sti_usb_phy.c
ti-pipe3-phy.c