mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
975324a7d9
For FSL low-end processors (VVN2.2), in order to detect the SD card, we should enable PEREN, HCKEN and IPGEN to enable the clock. Otherwise, after booting the u-boot, and then inserting the SD card, the SD card can't be detected. For SDHC VVN2.3 IP, these bits are reserved, and SDCLKEN is used. And when accessing to these reserved bit, no any impact happened. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Andy Fleming <afleming@gmail.com> CC: Marek Vasut <marex@denx.de> Signed-off-by: Andy Fleming <afleming@freescale.com>
622 lines
15 KiB
C
622 lines
15 KiB
C
/*
|
|
* Copyright 2007, 2010-2011 Freescale Semiconductor, Inc
|
|
* Andy Fleming
|
|
*
|
|
* Based vaguely on the pxa mmc code:
|
|
* (C) Copyright 2003
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <hwconfig.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <fdt_support.h>
|
|
#include <asm/io.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
struct fsl_esdhc {
|
|
uint dsaddr;
|
|
uint blkattr;
|
|
uint cmdarg;
|
|
uint xfertyp;
|
|
uint cmdrsp0;
|
|
uint cmdrsp1;
|
|
uint cmdrsp2;
|
|
uint cmdrsp3;
|
|
uint datport;
|
|
uint prsstat;
|
|
uint proctl;
|
|
uint sysctl;
|
|
uint irqstat;
|
|
uint irqstaten;
|
|
uint irqsigen;
|
|
uint autoc12err;
|
|
uint hostcapblt;
|
|
uint wml;
|
|
uint mixctrl;
|
|
char reserved1[4];
|
|
uint fevt;
|
|
char reserved2[168];
|
|
uint hostver;
|
|
char reserved3[780];
|
|
uint scr;
|
|
};
|
|
|
|
/* Return the XFERTYP flags for a given command and data packet */
|
|
uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
uint xfertyp = 0;
|
|
|
|
if (data) {
|
|
xfertyp |= XFERTYP_DPSEL;
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
xfertyp |= XFERTYP_DMAEN;
|
|
#endif
|
|
if (data->blocks > 1) {
|
|
xfertyp |= XFERTYP_MSBSEL;
|
|
xfertyp |= XFERTYP_BCEN;
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
xfertyp |= XFERTYP_AC12EN;
|
|
#endif
|
|
}
|
|
|
|
if (data->flags & MMC_DATA_READ)
|
|
xfertyp |= XFERTYP_DTDSEL;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
xfertyp |= XFERTYP_CCCEN;
|
|
if (cmd->resp_type & MMC_RSP_OPCODE)
|
|
xfertyp |= XFERTYP_CICEN;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
xfertyp |= XFERTYP_RSPTYP_136;
|
|
else if (cmd->resp_type & MMC_RSP_BUSY)
|
|
xfertyp |= XFERTYP_RSPTYP_48_BUSY;
|
|
else if (cmd->resp_type & MMC_RSP_PRESENT)
|
|
xfertyp |= XFERTYP_RSPTYP_48;
|
|
|
|
#ifdef CONFIG_MX53
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
xfertyp |= XFERTYP_CMDTYP_ABORT;
|
|
#endif
|
|
return XFERTYP_CMD(cmd->cmdidx) | xfertyp;
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
/*
|
|
* PIO Read/Write Mode reduce the performace as DMA is not used in this mode.
|
|
*/
|
|
static void
|
|
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
uint blocks;
|
|
char *buffer;
|
|
uint databuf;
|
|
uint size;
|
|
uint irqstat;
|
|
uint timeout;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
blocks = data->blocks;
|
|
buffer = data->dest;
|
|
while (blocks) {
|
|
timeout = PIO_TIMEOUT;
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN)
|
|
&& --timeout);
|
|
if (timeout <= 0) {
|
|
printf("\nData Read Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
databuf = in_le32(®s->datport);
|
|
*((uint *)buffer) = databuf;
|
|
buffer += 4;
|
|
size -= 4;
|
|
}
|
|
blocks--;
|
|
}
|
|
} else {
|
|
blocks = data->blocks;
|
|
buffer = (char *)data->src;
|
|
while (blocks) {
|
|
timeout = PIO_TIMEOUT;
|
|
size = data->blocksize;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN)
|
|
&& --timeout);
|
|
if (timeout <= 0) {
|
|
printf("\nData Write Failed in PIO Mode.");
|
|
return;
|
|
}
|
|
while (size && (!(irqstat & IRQSTAT_TC))) {
|
|
udelay(100); /* Wait before last byte transfer complete */
|
|
databuf = *((uint *)buffer);
|
|
buffer += 4;
|
|
size -= 4;
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
out_le32(®s->datport, databuf);
|
|
}
|
|
blocks--;
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static int esdhc_setup_data(struct mmc *mmc, struct mmc_data *data)
|
|
{
|
|
int timeout;
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
uint wml_value;
|
|
|
|
wml_value = data->blocksize/4;
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
if (wml_value > WML_RD_WML_MAX)
|
|
wml_value = WML_RD_WML_MAX_VAL;
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
|
|
esdhc_write32(®s->dsaddr, (u32)data->dest);
|
|
} else {
|
|
flush_dcache_range((ulong)data->src,
|
|
(ulong)data->src+data->blocks
|
|
*data->blocksize);
|
|
|
|
if (wml_value > WML_WR_WML_MAX)
|
|
wml_value = WML_WR_WML_MAX_VAL;
|
|
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
|
|
printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
|
|
return TIMEOUT;
|
|
}
|
|
|
|
esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
|
|
wml_value << 16);
|
|
esdhc_write32(®s->dsaddr, (u32)data->src);
|
|
}
|
|
#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
|
|
if (!(data->flags & MMC_DATA_READ)) {
|
|
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
|
|
printf("\nThe SD card is locked. "
|
|
"Can not write to a locked card.\n\n");
|
|
return TIMEOUT;
|
|
}
|
|
esdhc_write32(®s->dsaddr, (u32)data->src);
|
|
} else
|
|
esdhc_write32(®s->dsaddr, (u32)data->dest);
|
|
#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
|
|
|
|
esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
|
|
|
|
/* Calculate the timeout period for data transactions */
|
|
/*
|
|
* 1)Timeout period = (2^(timeout+13)) SD Clock cycles
|
|
* 2)Timeout period should be minimum 0.250sec as per SD Card spec
|
|
* So, Number of SD Clock cycles for 0.25sec should be minimum
|
|
* (SD Clock/sec * 0.25 sec) SD Clock cycles
|
|
* = (mmc->tran_speed * 1/4) SD Clock cycles
|
|
* As 1) >= 2)
|
|
* => (2^(timeout+13)) >= mmc->tran_speed * 1/4
|
|
* Taking log2 both the sides
|
|
* => timeout + 13 >= log2(mmc->tran_speed/4)
|
|
* Rounding up to next power of 2
|
|
* => timeout + 13 = log2(mmc->tran_speed/4) + 1
|
|
* => timeout + 13 = fls(mmc->tran_speed/4)
|
|
*/
|
|
timeout = fls(mmc->tran_speed/4);
|
|
timeout -= 13;
|
|
|
|
if (timeout > 14)
|
|
timeout = 14;
|
|
|
|
if (timeout < 0)
|
|
timeout = 0;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
|
|
if ((timeout == 4) || (timeout == 8) || (timeout == 12))
|
|
timeout++;
|
|
#endif
|
|
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, timeout << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void check_and_invalidate_dcache_range
|
|
(struct mmc_cmd *cmd,
|
|
struct mmc_data *data) {
|
|
unsigned start = (unsigned)data->dest ;
|
|
unsigned size = roundup(ARCH_DMA_MINALIGN,
|
|
data->blocks*data->blocksize);
|
|
unsigned end = start+size ;
|
|
invalidate_dcache_range(start, end);
|
|
}
|
|
/*
|
|
* Sends a command out on the bus. Takes the mmc pointer,
|
|
* a command pointer, and an optional data pointer.
|
|
*/
|
|
static int
|
|
esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
|
|
{
|
|
uint xfertyp;
|
|
uint irqstat;
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
return 0;
|
|
#endif
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
sync();
|
|
|
|
/* Wait for the bus to be idle */
|
|
while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) ||
|
|
(esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB))
|
|
;
|
|
|
|
while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)
|
|
;
|
|
|
|
/* Wait at least 8 SD clock cycles before the next command */
|
|
/*
|
|
* Note: This is way more than 8 cycles, but 1ms seems to
|
|
* resolve timing issues with some cards
|
|
*/
|
|
udelay(1000);
|
|
|
|
/* Set up for a data transfer if we have one */
|
|
if (data) {
|
|
int err;
|
|
|
|
err = esdhc_setup_data(mmc, data);
|
|
if(err)
|
|
return err;
|
|
}
|
|
|
|
/* Figure out the transfer arguments */
|
|
xfertyp = esdhc_xfertyp(cmd, data);
|
|
|
|
/* Send the command */
|
|
esdhc_write32(®s->cmdarg, cmd->cmdarg);
|
|
#if defined(CONFIG_FSL_USDHC)
|
|
esdhc_write32(®s->mixctrl,
|
|
(esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
|
|
esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
|
|
#else
|
|
esdhc_write32(®s->xfertyp, xfertyp);
|
|
#endif
|
|
|
|
/* Mask all irqs */
|
|
esdhc_write32(®s->irqsigen, 0);
|
|
|
|
/* Wait for the command to complete */
|
|
while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
|
|
;
|
|
|
|
if (data && (data->flags & MMC_DATA_READ))
|
|
check_and_invalidate_dcache_range(cmd, data);
|
|
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
esdhc_write32(®s->irqstat, irqstat);
|
|
|
|
/* Reset CMD and DATA portions on error */
|
|
if (irqstat & (CMD_ERR | IRQSTAT_CTOE)) {
|
|
esdhc_write32(®s->sysctl, esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTC);
|
|
while (esdhc_read32(®s->sysctl) & SYSCTL_RSTC)
|
|
;
|
|
|
|
if (data) {
|
|
esdhc_write32(®s->sysctl,
|
|
esdhc_read32(®s->sysctl) |
|
|
SYSCTL_RSTD);
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTD))
|
|
;
|
|
}
|
|
}
|
|
|
|
if (irqstat & CMD_ERR)
|
|
return COMM_ERR;
|
|
|
|
if (irqstat & IRQSTAT_CTOE)
|
|
return TIMEOUT;
|
|
|
|
/* Workaround for ESDHC errata ENGcm03648 */
|
|
if (!data && (cmd->resp_type & MMC_RSP_BUSY)) {
|
|
int timeout = 2500;
|
|
|
|
/* Poll on DATA0 line for cmd with busy signal for 250 ms */
|
|
while (timeout > 0 && !(esdhc_read32(®s->prsstat) &
|
|
PRSSTAT_DAT0)) {
|
|
udelay(100);
|
|
timeout--;
|
|
}
|
|
|
|
if (timeout <= 0) {
|
|
printf("Timeout waiting for DAT0 to go high!\n");
|
|
return TIMEOUT;
|
|
}
|
|
}
|
|
|
|
/* Copy the response to the response buffer */
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
u32 cmdrsp3, cmdrsp2, cmdrsp1, cmdrsp0;
|
|
|
|
cmdrsp3 = esdhc_read32(®s->cmdrsp3);
|
|
cmdrsp2 = esdhc_read32(®s->cmdrsp2);
|
|
cmdrsp1 = esdhc_read32(®s->cmdrsp1);
|
|
cmdrsp0 = esdhc_read32(®s->cmdrsp0);
|
|
cmd->response[0] = (cmdrsp3 << 8) | (cmdrsp2 >> 24);
|
|
cmd->response[1] = (cmdrsp2 << 8) | (cmdrsp1 >> 24);
|
|
cmd->response[2] = (cmdrsp1 << 8) | (cmdrsp0 >> 24);
|
|
cmd->response[3] = (cmdrsp0 << 8);
|
|
} else
|
|
cmd->response[0] = esdhc_read32(®s->cmdrsp0);
|
|
|
|
/* Wait until all of the blocks are transferred */
|
|
if (data) {
|
|
#ifdef CONFIG_SYS_FSL_ESDHC_USE_PIO
|
|
esdhc_pio_read_write(mmc, data);
|
|
#else
|
|
do {
|
|
irqstat = esdhc_read32(®s->irqstat);
|
|
|
|
if (irqstat & IRQSTAT_DTOE)
|
|
return TIMEOUT;
|
|
|
|
if (irqstat & DATA_ERR)
|
|
return COMM_ERR;
|
|
} while (!(irqstat & IRQSTAT_TC) &&
|
|
(esdhc_read32(®s->prsstat) & PRSSTAT_DLA));
|
|
#endif
|
|
}
|
|
|
|
esdhc_write32(®s->irqstat, -1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void set_sysctl(struct mmc *mmc, uint clock)
|
|
{
|
|
int sdhc_clk = gd->sdhc_clk;
|
|
int div, pre_div;
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
uint clk;
|
|
|
|
if (clock < mmc->f_min)
|
|
clock = mmc->f_min;
|
|
|
|
if (sdhc_clk / 16 > clock) {
|
|
for (pre_div = 2; pre_div < 256; pre_div *= 2)
|
|
if ((sdhc_clk / pre_div) <= (clock * 16))
|
|
break;
|
|
} else
|
|
pre_div = 2;
|
|
|
|
for (div = 1; div <= 16; div++)
|
|
if ((sdhc_clk / (div * pre_div)) <= clock)
|
|
break;
|
|
|
|
pre_div >>= 1;
|
|
div -= 1;
|
|
|
|
clk = (pre_div << 8) | (div << 4);
|
|
|
|
esdhc_clrbits32(®s->sysctl, SYSCTL_CKEN);
|
|
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_CLOCK_MASK, clk);
|
|
|
|
udelay(10000);
|
|
|
|
clk = SYSCTL_PEREN | SYSCTL_CKEN;
|
|
|
|
esdhc_setbits32(®s->sysctl, clk);
|
|
}
|
|
|
|
static void esdhc_set_ios(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
/* Set the clock speed */
|
|
set_sysctl(mmc, mmc->clock);
|
|
|
|
/* Set the bus width */
|
|
esdhc_clrbits32(®s->proctl, PROCTL_DTW_4 | PROCTL_DTW_8);
|
|
|
|
if (mmc->bus_width == 4)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_4);
|
|
else if (mmc->bus_width == 8)
|
|
esdhc_setbits32(®s->proctl, PROCTL_DTW_8);
|
|
|
|
}
|
|
|
|
static int esdhc_init(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
int timeout = 1000;
|
|
|
|
/* Reset the entire host controller */
|
|
esdhc_write32(®s->sysctl, SYSCTL_RSTA);
|
|
|
|
/* Wait until the controller is available */
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
|
|
udelay(1000);
|
|
|
|
/* Enable cache snooping */
|
|
if (cfg && !cfg->no_snoop)
|
|
esdhc_write32(®s->scr, 0x00000040);
|
|
|
|
esdhc_write32(®s->sysctl, SYSCTL_HCKEN | SYSCTL_IPGEN);
|
|
|
|
/* Set the initial clock speed */
|
|
mmc_set_clock(mmc, 400000);
|
|
|
|
/* Disable the BRR and BWR bits in IRQSTAT */
|
|
esdhc_clrbits32(®s->irqstaten, IRQSTATEN_BRR | IRQSTATEN_BWR);
|
|
|
|
/* Put the PROCTL reg back to the default */
|
|
esdhc_write32(®s->proctl, PROCTL_INIT);
|
|
|
|
/* Set timout to the maximum value */
|
|
esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int esdhc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
int timeout = 1000;
|
|
|
|
while (!(esdhc_read32(®s->prsstat) & PRSSTAT_CINS) && --timeout)
|
|
udelay(1000);
|
|
|
|
return timeout > 0;
|
|
}
|
|
|
|
static void esdhc_reset(struct fsl_esdhc *regs)
|
|
{
|
|
unsigned long timeout = 100; /* wait max 100 ms */
|
|
|
|
/* reset the controller */
|
|
esdhc_write32(®s->sysctl, SYSCTL_RSTA);
|
|
|
|
/* hardware clears the bit when it is done */
|
|
while ((esdhc_read32(®s->sysctl) & SYSCTL_RSTA) && --timeout)
|
|
udelay(1000);
|
|
if (!timeout)
|
|
printf("MMC/SD: Reset never completed.\n");
|
|
}
|
|
|
|
int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg)
|
|
{
|
|
struct fsl_esdhc *regs;
|
|
struct mmc *mmc;
|
|
u32 caps, voltage_caps;
|
|
|
|
if (!cfg)
|
|
return -1;
|
|
|
|
mmc = malloc(sizeof(struct mmc));
|
|
|
|
sprintf(mmc->name, "FSL_SDHC");
|
|
regs = (struct fsl_esdhc *)cfg->esdhc_base;
|
|
|
|
/* First reset the eSDHC controller */
|
|
esdhc_reset(regs);
|
|
|
|
esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
|
|
| SYSCTL_IPGEN | SYSCTL_CKEN);
|
|
|
|
mmc->priv = cfg;
|
|
mmc->send_cmd = esdhc_send_cmd;
|
|
mmc->set_ios = esdhc_set_ios;
|
|
mmc->init = esdhc_init;
|
|
mmc->getcd = esdhc_getcd;
|
|
|
|
voltage_caps = 0;
|
|
caps = regs->hostcapblt;
|
|
|
|
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
|
|
caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
|
|
ESDHC_HOSTCAPBLT_VS18 | ESDHC_HOSTCAPBLT_VS30);
|
|
#endif
|
|
if (caps & ESDHC_HOSTCAPBLT_VS18)
|
|
voltage_caps |= MMC_VDD_165_195;
|
|
if (caps & ESDHC_HOSTCAPBLT_VS30)
|
|
voltage_caps |= MMC_VDD_29_30 | MMC_VDD_30_31;
|
|
if (caps & ESDHC_HOSTCAPBLT_VS33)
|
|
voltage_caps |= MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
|
|
#ifdef CONFIG_SYS_SD_VOLTAGE
|
|
mmc->voltages = CONFIG_SYS_SD_VOLTAGE;
|
|
#else
|
|
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
|
|
#endif
|
|
if ((mmc->voltages & voltage_caps) == 0) {
|
|
printf("voltage not supported by controller\n");
|
|
return -1;
|
|
}
|
|
|
|
mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT;
|
|
|
|
if (caps & ESDHC_HOSTCAPBLT_HSS)
|
|
mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
|
|
|
|
mmc->f_min = 400000;
|
|
mmc->f_max = MIN(gd->sdhc_clk, 52000000);
|
|
|
|
mmc->b_max = 0;
|
|
mmc_register(mmc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fsl_esdhc_mmc_init(bd_t *bis)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg;
|
|
|
|
cfg = malloc(sizeof(struct fsl_esdhc_cfg));
|
|
memset(cfg, 0, sizeof(struct fsl_esdhc_cfg));
|
|
cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
|
|
return fsl_esdhc_initialize(bis, cfg);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_LIBFDT
|
|
void fdt_fixup_esdhc(void *blob, bd_t *bd)
|
|
{
|
|
const char *compat = "fsl,esdhc";
|
|
|
|
#ifdef CONFIG_FSL_ESDHC_PIN_MUX
|
|
if (!hwconfig("esdhc")) {
|
|
do_fixup_by_compat(blob, compat, "status", "disabled",
|
|
8 + 1, 1);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
do_fixup_by_compat_u32(blob, compat, "clock-frequency",
|
|
gd->sdhc_clk, 1);
|
|
|
|
do_fixup_by_compat(blob, compat, "status", "okay",
|
|
4 + 1, 1);
|
|
}
|
|
#endif
|