mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 06:30:39 +00:00
983e37007d
This moves what was in arch/arm/cpu/armv7/omap-common in to
arch/arm/mach-omap2 and moves
arch/arm/cpu/armv7/{am33xx,omap3,omap4,omap5} in to arch/arm/mach-omap2
as subdirectories. All refernces to the former locations are updated to
the current locations. For the logic to decide what our outputs are,
consolidate the tests into a single config.mk rather than including 4.
Signed-off-by: Tom Rini <trini@konsulko.com>
90 lines
1.8 KiB
ArmAsm
90 lines
1.8 KiB
ArmAsm
/*
|
|
* Board specific setup info
|
|
*
|
|
* (C) Copyright 2010
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Aneesh V <aneesh@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/arch/spl.h>
|
|
#include <linux/linkage.h>
|
|
|
|
.arch_extension sec
|
|
|
|
#ifdef CONFIG_SPL
|
|
ENTRY(save_boot_params)
|
|
ldr r1, =OMAP_SRAM_SCRATCH_BOOT_PARAMS
|
|
str r0, [r1]
|
|
b save_boot_params_ret
|
|
ENDPROC(save_boot_params)
|
|
|
|
#if !defined(CONFIG_TI_SECURE_DEVICE) && defined(CONFIG_ARMV7_LPAE)
|
|
ENTRY(switch_to_hypervisor)
|
|
|
|
/*
|
|
* Switch to hypervisor mode
|
|
*/
|
|
adr r0, save_sp
|
|
str sp, [r0]
|
|
adr r1, restore_from_hyp
|
|
ldr r0, =0x102
|
|
b omap_smc1
|
|
restore_from_hyp:
|
|
adr r0, save_sp
|
|
ldr sp, [r0]
|
|
MRC p15, 4, R0, c1, c0, 0
|
|
ldr r1, =0X1004 @Set cache enable bits for hypervisor mode
|
|
orr r0, r0, r1
|
|
MCR p15, 4, R0, c1, c0, 0
|
|
b switch_to_hypervisor_ret
|
|
save_sp:
|
|
.word 0x0
|
|
ENDPROC(switch_to_hypervisor)
|
|
#endif
|
|
#endif
|
|
|
|
ENTRY(omap_smc1)
|
|
push {r4-r12, lr} @ save registers - ROM code may pollute
|
|
@ our registers
|
|
mov r12, r0 @ Service
|
|
mov r0, r1 @ Argument
|
|
|
|
dsb
|
|
dmb
|
|
smc 0 @ SMC #0 to enter monitor mode
|
|
@ call ROM Code API for the service requested
|
|
pop {r4-r12, pc}
|
|
ENDPROC(omap_smc1)
|
|
|
|
ENTRY(omap_smc_sec)
|
|
push {r4-r12, lr} @ save registers - ROM code may pollute
|
|
@ our registers
|
|
mov r6, #0xFF @ Indicate new Task call
|
|
mov r12, #0x00 @ Secure Service ID in R12
|
|
|
|
dsb
|
|
dmb
|
|
smc 0 @ SMC #0 to enter monitor mode
|
|
|
|
b omap_smc_sec_end @ exit at end of the service execution
|
|
nop
|
|
|
|
@ In case of IRQ happening in Secure, then ARM will branch here.
|
|
@ At that moment, IRQ will be pending and ARM will jump to Non Secure
|
|
@ IRQ handler
|
|
mov r12, #0xFE
|
|
|
|
dsb
|
|
dmb
|
|
smc 0 @ SMC #0 to enter monitor mode
|
|
|
|
omap_smc_sec_end:
|
|
pop {r4-r12, pc}
|
|
ENDPROC(omap_smc_sec)
|