mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
3429071700
Commit 9d803d8c mistakenly changed some constants
from 0x300 into 300 - this patch fixes it.
Pointed out by Tom Evans <tom@ceos.com.au>, see
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/51992 for
details.
Signed-off-by: Wolfgang Denk <wd@denx.de>
146 lines
3.4 KiB
ArmAsm
146 lines
3.4 KiB
ArmAsm
/*
|
|
* (C) Copyright 2006 DENX Software Engineering
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE
|
|
|
|
.macro wait time
|
|
ldr r2, =OSCR
|
|
mov r3, #0
|
|
str r3, [r2]
|
|
0:
|
|
ldr r3, [r2]
|
|
cmp r3, \time
|
|
bls 0b
|
|
.endm
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* Set up GPIO pins first */
|
|
mov r10, lr
|
|
|
|
/* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */
|
|
ldr r0, =GPIO97
|
|
ldr r1, =0x801
|
|
str r1, [r0]
|
|
|
|
ldr r0, =GPIO98
|
|
ldr r1, =0x801
|
|
str r1, [r0]
|
|
|
|
/* tebrandt - ASCR, clear the RDH bit */
|
|
ldr r0, =ASCR
|
|
ldr r1, [r0]
|
|
bic r1, r1, #0x80000000
|
|
str r1, [r0]
|
|
|
|
mem_init:
|
|
/* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */
|
|
ldr r0, =ACCR
|
|
ldr r1, [r0]
|
|
orr r1, r1, #0x3000
|
|
str r1, [r0]
|
|
ldr r1, [r0]
|
|
|
|
/* 2. Programm MDCNFG, leaving DMCEN de-asserted */
|
|
ldr r0, =MDCNFG
|
|
ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13)
|
|
/* ldr r1, =0x80000403 */
|
|
str r1, [r0]
|
|
ldr r1, [r0] /* delay until written */
|
|
|
|
/* 3. wait nop power up waiting period (200ms)
|
|
* optimization: Steps 4+6 can be done during this
|
|
*/
|
|
wait #0x300
|
|
|
|
/* 4. Perform an initial Rcomp-calibration cycle */
|
|
ldr r0, =RCOMP
|
|
ldr r1, =0x80000000
|
|
str r1, [r0]
|
|
ldr r1, [r0] /* delay until written */
|
|
/* missing: program for automatic rcomp evaluation cycles */
|
|
|
|
/* 5. DDR DRAM strobe delay calibration */
|
|
ldr r0, =DDR_HCAL
|
|
ldr r1, =0x88000007
|
|
str r1, [r0]
|
|
wait #5
|
|
ldr r1, [r0] /* delay until written */
|
|
|
|
/* Set MDMRS */
|
|
ldr r0, =MDMRS
|
|
ldr r1, =0x60000033
|
|
str r1, [r0]
|
|
wait #300
|
|
|
|
/* Configure MDREFR */
|
|
ldr r0, =MDREFR
|
|
ldr r1, =0x00000006
|
|
str r1, [r0]
|
|
ldr r1, [r0]
|
|
|
|
/* Enable the dynamic memory controller */
|
|
ldr r0, =MDCNFG
|
|
ldr r1, [r0]
|
|
orr r1, r1, #MDCNFG_DMCEN
|
|
str r1, [r0]
|
|
|
|
#ifndef CONFIG_SYS_SKIP_DRAM_SCRUB
|
|
/* scrub/init SDRAM if enabled/present */
|
|
ldr r8, =CONFIG_SYS_DRAM_BASE /* base address of SDRAM (CONFIG_SYS_DRAM_BASE) */
|
|
ldr r9, =CONFIG_SYS_DRAM_SIZE /* size of memory to scrub (CONFIG_SYS_DRAM_SIZE) */
|
|
mov r0, #0 /* scrub with 0x0000:0000 */
|
|
mov r1, #0
|
|
mov r2, #0
|
|
mov r3, #0
|
|
mov r4, #0
|
|
mov r5, #0
|
|
mov r6, #0
|
|
mov r7, #0
|
|
10: /* fastScrubLoop */
|
|
subs r9, r9, #32 /* 8 words/line */
|
|
stmia r8!, {r0-r7}
|
|
beq 15f
|
|
b 10b
|
|
#endif /* CONFIG_SYS_SKIP_DRAM_SCRUB */
|
|
|
|
15:
|
|
/* Mask all interrupts */
|
|
mov r1, #0
|
|
mcr p6, 0, r1, c1, c0, 0 @ ICMR
|
|
|
|
/* Disable software and data breakpoints */
|
|
mov r0, #0
|
|
mcr p15,0,r0,c14,c8,0 /* ibcr0 */
|
|
mcr p15,0,r0,c14,c9,0 /* ibcr1 */
|
|
mcr p15,0,r0,c14,c4,0 /* dbcon */
|
|
|
|
/* Enable all debug functionality */
|
|
mov r0,#0x80000000
|
|
mcr p14,0,r0,c10,c0,0 /* dcsr */
|
|
|
|
endlowlevel_init:
|
|
mov pc, lr
|