u-boot/board/ti/sdp3430/sdp.c
Paul Kocialkowski aac5450ea9 omap_hsmmc: Board-specific TWL4030 MMC power initializations
Boards using the TWL4030 regulator may not all use the LDOs the same way
(e.g. MMC2 power can be controlled by another LDO than VMMC2).
This delegates TWL4030 MMC power initializations to board-specific functions,
that may still call twl4030_power_mmc_init for the default behavior.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Fix omap3_evm warning, add twl4030.h]
Signed-off-by: Tom Rini <trini@ti.com>
2014-12-04 21:28:15 -05:00

203 lines
4.7 KiB
C

/*
* (C) Copyright 2004-2009
* Texas Instruments Incorporated, <www.ti.com>
* Richard Woodruff <r-woodruff2@ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
#include "sdp.h"
DECLARE_GLOBAL_DATA_PTR;
const omap3_sysinfo sysinfo = {
DDR_DISCRETE,
"OMAP3 SDP3430 board",
#if defined(CONFIG_ENV_IS_IN_ONENAND)
"OneNAND",
#elif defined(CONFIG_ENV_IS_IN_NAND)
"NAND",
#else
"NOR",
#endif
};
/* Timing definitions for GPMC controller for Sibley NOR */
static const u32 gpmc_sdp_nor[] = {
SDP3430_NOR_GPMC_CONF1,
SDP3430_NOR_GPMC_CONF2,
SDP3430_NOR_GPMC_CONF3,
SDP3430_NOR_GPMC_CONF4,
SDP3430_NOR_GPMC_CONF5,
SDP3430_NOR_GPMC_CONF6,
/*CONF7- computed as params */
};
/*
* Timing definitions for GPMC controller for Debug Board
* Debug board contains access to ethernet and DIP Switch setting
* information etc.
*/
static const u32 gpmc_sdp_debug[] = {
SDP3430_DEBUG_GPMC_CONF1,
SDP3430_DEBUG_GPMC_CONF2,
SDP3430_DEBUG_GPMC_CONF3,
SDP3430_DEBUG_GPMC_CONF4,
SDP3430_DEBUG_GPMC_CONF5,
SDP3430_DEBUG_GPMC_CONF6,
/*CONF7- computed as params */
};
/* Timing defintions for GPMC OneNAND */
static const u32 gpmc_sdp_onenand[] = {
SDP3430_ONENAND_GPMC_CONF1,
SDP3430_ONENAND_GPMC_CONF2,
SDP3430_ONENAND_GPMC_CONF3,
SDP3430_ONENAND_GPMC_CONF4,
SDP3430_ONENAND_GPMC_CONF5,
SDP3430_ONENAND_GPMC_CONF6,
/*CONF7- computed as params */
};
/* GPMC definitions for GPMC NAND */
static const u32 gpmc_sdp_nand[] = {
SDP3430_NAND_GPMC_CONF1,
SDP3430_NAND_GPMC_CONF2,
SDP3430_NAND_GPMC_CONF3,
SDP3430_NAND_GPMC_CONF4,
SDP3430_NAND_GPMC_CONF5,
SDP3430_NAND_GPMC_CONF6,
/*CONF7- computed as params */
};
/* gpmc_cfg is initialized by gpmc_init and we use it here */
extern struct gpmc *gpmc_cfg;
/**
* @brief board_init - gpmc and basic setup as phase1 of boot sequence
*
* @return 0
*/
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* TODO: Dynamically pop out CS mapping and program accordingly */
/* Configure devices for default ON ON ON settings */
enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
GPMC_SIZE_16M);
enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
GPMC_SIZE_16M);
enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
GPMC_SIZE_16M);
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
return 0;
}
#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c)
#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
/**
* @brief board_eth_init Take the Ethernet controller out of reset and wait
* for the EEPROM load to complete.
*/
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_LAN91C96
int cnt = 20;
writew(0x0, LAN_RESET_REGISTER);
do {
writew(0x1, LAN_RESET_REGISTER);
udelay(100);
if (cnt == 0)
goto reset_err_out;
--cnt;
} while (readw(LAN_RESET_REGISTER) != 0x1);
cnt = 20;
do {
writew(0x0, LAN_RESET_REGISTER);
udelay(100);
if (cnt == 0)
goto reset_err_out;
--cnt;
} while (readw(LAN_RESET_REGISTER) != 0x0000);
udelay(1000);
writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
udelay(1000);
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
reset_err_out:
#endif
return rc;
}
/**
* @brief misc_init_r - Configure SDP board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
*
* @return 0
*/
int misc_init_r(void)
{
/* Partial setup:
* VAUX3 - 2.8V for DVI
* VPLL1 - 1.8V
* VDAC - 1.8V
* and turns on LEDA/LEDB (not needed ... NOP?)
*/
twl4030_power_init();
/* FIXME finish setup:
* VAUX1 - 2.8V for mainboard I/O
* VAUX2 - 2.8V for camera
* VAUX4 - 1.8V for OMAP3 CSI
* VMMC1 - 3.15V (init, variable) for MMC1
* VMMC2 - 1.85V for MMC2
* VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
* VPLL2 - 1.8V
*/
return 0;
}
/**
* @brief set_muxconf_regs Setting up the configuration Mux registers
* specific to the hardware. Many pins need to be moved from protect
* to primary mode.
*/
void set_muxconf_regs(void)
{
/* platform specific muxes */
MUX_SDP3430();
}
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
return omap_mmc_init(0, 0, 0, -1, -1);
}
void board_mmc_power_init(void)
{
twl4030_power_mmc_init(0);
}
#endif