mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
2548493ab4
When you enable CONFIG_OF_LIVE, you will end up with a lot of conversions. To generate this commit, I used coccinelle excluding drivers/core/, include/dm/, and test/ The semantic patch that makes this change is as follows: <smpl> @@ expression dev; @@ -devfdt_get_addr(dev) +dev_read_addr(dev) </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
599 lines
15 KiB
C
599 lines
15 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2000-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* Conversion to DM
|
|
* (C) 2019 Angelo Dureghello <angelo.dureghello@timesys.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <hang.h>
|
|
#include <malloc.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <net.h>
|
|
#include <miiphy.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mii.h>
|
|
#include <asm/immap.h>
|
|
#include <asm/fsl_mcdmafec.h>
|
|
|
|
#include "MCD_dma.h"
|
|
|
|
#undef ET_DEBUG
|
|
#undef MII_DEBUG
|
|
|
|
/* Ethernet Transmit and Receive Buffers */
|
|
#define DBUF_LENGTH 1520
|
|
#define PKT_MAXBUF_SIZE 1518
|
|
#define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
|
|
|
|
/* RxBD bits definitions */
|
|
#define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
|
|
BD_ENET_RX_OV | BD_ENET_RX_TR)
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void init_eth_info(struct fec_info_dma *info)
|
|
{
|
|
/* setup Receive and Transmit buffer descriptor */
|
|
#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
|
|
static u32 tmp;
|
|
|
|
if (info->index == 0)
|
|
tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
|
|
else
|
|
info->rxbd = (cbd_t *)DBUF_LENGTH;
|
|
|
|
info->rxbd = (cbd_t *)((u32)info->rxbd + tmp);
|
|
tmp = (u32)info->rxbd;
|
|
info->txbd =
|
|
(cbd_t *)((u32)info->txbd + tmp +
|
|
(PKTBUFSRX * sizeof(cbd_t)));
|
|
tmp = (u32)info->txbd;
|
|
info->txbuf =
|
|
(char *)((u32)info->txbuf + tmp +
|
|
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
|
|
tmp = (u32)info->txbuf;
|
|
#else
|
|
info->rxbd =
|
|
(cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
|
|
(PKTBUFSRX * sizeof(cbd_t)));
|
|
info->txbd =
|
|
(cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE,
|
|
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
|
|
info->txbuf =
|
|
(char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
|
|
#endif
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd);
|
|
#endif
|
|
info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
|
|
}
|
|
|
|
static void fec_halt(struct udevice *dev)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
volatile fecdma_t *fecp = (fecdma_t *)info->iobase;
|
|
int counter = 0xffff;
|
|
|
|
/* issue graceful stop command to the FEC transmitter if necessary */
|
|
fecp->tcr |= FEC_TCR_GTS;
|
|
|
|
/* wait for graceful stop to register */
|
|
while ((counter--) && (!(fecp->eir & FEC_EIR_GRA)))
|
|
;
|
|
|
|
/* Disable DMA tasks */
|
|
MCD_killDma(info->tx_task);
|
|
MCD_killDma(info->rx_task);
|
|
|
|
/* Disable the Ethernet Controller */
|
|
fecp->ecr &= ~FEC_ECR_ETHER_EN;
|
|
|
|
/* Clear FIFO status registers */
|
|
fecp->rfsr &= FIFO_ERRSTAT;
|
|
fecp->tfsr &= FIFO_ERRSTAT;
|
|
|
|
fecp->frst = 0x01000000;
|
|
|
|
/* Issue a reset command to the FEC chip */
|
|
fecp->ecr |= FEC_ECR_RESET;
|
|
|
|
/* wait at least 20 clock cycles */
|
|
mdelay(10);
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("Ethernet task stopped\n");
|
|
#endif
|
|
}
|
|
|
|
#ifdef ET_DEBUG
|
|
static void dbg_fec_regs(struct eth_device *dev)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
volatile fecdma_t *fecp = (fecdma_t *)info->iobase;
|
|
|
|
printf("=====\n");
|
|
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
|
|
printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
|
|
printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
|
|
printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
|
|
printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
|
|
printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
|
|
printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
|
|
printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr);
|
|
printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
|
|
printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
|
|
printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
|
|
printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
|
|
printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
|
|
printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
|
|
printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
|
|
printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
|
|
printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
|
|
printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
|
|
printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
|
|
printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
|
|
printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
|
|
printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
|
|
printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar);
|
|
printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
|
|
printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
|
|
printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
|
|
printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
|
|
printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
|
|
printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
|
|
printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
|
|
printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar);
|
|
printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
|
|
printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
|
|
printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst);
|
|
printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
|
|
}
|
|
#endif
|
|
|
|
static void set_fec_duplex_speed(volatile fecdma_t *fecp, int dup_spd)
|
|
{
|
|
struct bd_info *bd = gd->bd;
|
|
|
|
if ((dup_spd >> 16) == FULL) {
|
|
/* Set maximum frame length */
|
|
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
|
|
FEC_RCR_PROM | 0x100;
|
|
fecp->tcr = FEC_TCR_FDEN;
|
|
} else {
|
|
/* Half duplex mode */
|
|
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
|
|
FEC_RCR_MII_MODE | FEC_RCR_DRT;
|
|
fecp->tcr &= ~FEC_TCR_FDEN;
|
|
}
|
|
|
|
if ((dup_spd & 0xFFFF) == _100BASET) {
|
|
#ifdef MII_DEBUG
|
|
printf("100Mbps\n");
|
|
#endif
|
|
bd->bi_ethspeed = 100;
|
|
} else {
|
|
#ifdef MII_DEBUG
|
|
printf("10Mbps\n");
|
|
#endif
|
|
bd->bi_ethspeed = 10;
|
|
}
|
|
}
|
|
|
|
static void fec_set_hwaddr(volatile fecdma_t *fecp, u8 *mac)
|
|
{
|
|
u8 curr_byte; /* byte for which to compute the CRC */
|
|
int byte; /* loop - counter */
|
|
int bit; /* loop - counter */
|
|
u32 crc = 0xffffffff; /* initial value */
|
|
|
|
for (byte = 0; byte < 6; byte++) {
|
|
curr_byte = mac[byte];
|
|
for (bit = 0; bit < 8; bit++) {
|
|
if ((curr_byte & 0x01) ^ (crc & 0x01)) {
|
|
crc >>= 1;
|
|
crc = crc ^ 0xedb88320;
|
|
} else {
|
|
crc >>= 1;
|
|
}
|
|
curr_byte >>= 1;
|
|
}
|
|
}
|
|
|
|
crc = crc >> 26;
|
|
|
|
/* Set individual hash table register */
|
|
if (crc >= 32) {
|
|
fecp->ialr = (1 << (crc - 32));
|
|
fecp->iaur = 0;
|
|
} else {
|
|
fecp->ialr = 0;
|
|
fecp->iaur = (1 << crc);
|
|
}
|
|
|
|
/* Set physical address */
|
|
fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
|
|
fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
|
|
|
|
/* Clear multicast address hash table */
|
|
fecp->gaur = 0;
|
|
fecp->galr = 0;
|
|
}
|
|
|
|
static int fec_init(struct udevice *dev)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
volatile fecdma_t *fecp = (fecdma_t *)info->iobase;
|
|
int rval, i;
|
|
uchar enetaddr[6];
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("fec_init: iobase 0x%08x ...\n", info->iobase);
|
|
#endif
|
|
|
|
fecpin_setclear(info, 1);
|
|
fec_halt(dev);
|
|
|
|
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
|
|
defined (CONFIG_SYS_DISCOVER_PHY)
|
|
|
|
mii_init();
|
|
set_fec_duplex_speed(fecp, info->dup_spd);
|
|
#else
|
|
#ifndef CONFIG_SYS_DISCOVER_PHY
|
|
set_fec_duplex_speed(fecp, (FECDUPLEX << 16) | FECSPEED);
|
|
#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
|
|
#endif /* CONFIG_CMD_MII || CONFIG_MII */
|
|
|
|
/* We use strictly polling mode only */
|
|
fecp->eimr = 0;
|
|
|
|
/* Clear any pending interrupt */
|
|
fecp->eir = 0xffffffff;
|
|
|
|
/* Set station address */
|
|
if (info->index == 0)
|
|
rval = eth_env_get_enetaddr("ethaddr", enetaddr);
|
|
else
|
|
rval = eth_env_get_enetaddr("eth1addr", enetaddr);
|
|
|
|
if (!rval) {
|
|
puts("Please set a valid MAC address\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fec_set_hwaddr(fecp, enetaddr);
|
|
|
|
/* Set Opcode/Pause Duration Register */
|
|
fecp->opd = 0x00010020;
|
|
|
|
/* Setup Buffers and Buffer Descriptors */
|
|
info->rx_idx = 0;
|
|
info->tx_idx = 0;
|
|
|
|
/* Setup Receiver Buffer Descriptors (13.14.24.18)
|
|
* Settings: Empty, Wrap */
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
|
|
info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
|
|
info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
|
|
}
|
|
info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
|
|
|
|
/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
|
|
* Settings: Last, Tx CRC */
|
|
for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
|
|
info->txbd[i].cbd_sc = 0;
|
|
info->txbd[i].cbd_datlen = 0;
|
|
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
|
|
}
|
|
info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
|
|
|
|
info->used_tbd_idx = 0;
|
|
info->clean_tbd_num = CONFIG_SYS_TX_ETH_BUFFER;
|
|
|
|
/* Set Rx FIFO alarm and granularity value */
|
|
fecp->rfcr = 0x0c000000;
|
|
fecp->rfar = 0x0000030c;
|
|
|
|
/* Set Tx FIFO granularity value */
|
|
fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
|
|
fecp->tfar = 0x00000080;
|
|
|
|
fecp->tfwr = 0x2;
|
|
fecp->ctcwr = 0x03000000;
|
|
|
|
/* Enable DMA receive task */
|
|
MCD_startDma(info->rx_task,
|
|
(s8 *)info->rxbd,
|
|
0,
|
|
(s8 *)&fecp->rfdr,
|
|
4,
|
|
0,
|
|
4,
|
|
info->rx_init,
|
|
info->rx_pri,
|
|
(MCD_FECRX_DMA | MCD_TT_FLAGS_DEF),
|
|
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP)
|
|
);
|
|
|
|
/* Enable DMA tx task with no ready buffer descriptors */
|
|
MCD_startDma(info->tx_task,
|
|
(s8 *)info->txbd,
|
|
0,
|
|
(s8 *)&fecp->tfdr,
|
|
4,
|
|
0,
|
|
4,
|
|
info->tx_init,
|
|
info->tx_pri,
|
|
(MCD_FECTX_DMA | MCD_TT_FLAGS_DEF),
|
|
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP)
|
|
);
|
|
|
|
/* Now enable the transmit and receive processing */
|
|
fecp->ecr |= FEC_ECR_ETHER_EN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcdmafec_init(struct udevice *dev)
|
|
{
|
|
return fec_init(dev);
|
|
}
|
|
|
|
static int mcdmafec_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
cbd_t *p_tbd, *p_used_tbd;
|
|
u16 phy_status;
|
|
|
|
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status);
|
|
|
|
/* process all the consumed TBDs */
|
|
while (info->clean_tbd_num < CONFIG_SYS_TX_ETH_BUFFER) {
|
|
p_used_tbd = &info->txbd[info->used_tbd_idx];
|
|
if (p_used_tbd->cbd_sc & BD_ENET_TX_READY) {
|
|
#ifdef ET_DEBUG
|
|
printf("Cannot clean TBD %d, in use\n",
|
|
info->clean_tbd_num);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/* clean this buffer descriptor */
|
|
if (info->used_tbd_idx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
|
|
p_used_tbd->cbd_sc = BD_ENET_TX_WRAP;
|
|
else
|
|
p_used_tbd->cbd_sc = 0;
|
|
|
|
/* update some indeces for a correct handling of TBD ring */
|
|
info->clean_tbd_num++;
|
|
info->used_tbd_idx = (info->used_tbd_idx + 1)
|
|
% CONFIG_SYS_TX_ETH_BUFFER;
|
|
}
|
|
|
|
/* Check for valid length of data. */
|
|
if (length > 1500 || length <= 0)
|
|
return -1;
|
|
|
|
/* Check the number of vacant TxBDs. */
|
|
if (info->clean_tbd_num < 1) {
|
|
printf("No available TxBDs ...\n");
|
|
return -1;
|
|
}
|
|
|
|
/* Get the first TxBD to send the mac header */
|
|
p_tbd = &info->txbd[info->tx_idx];
|
|
p_tbd->cbd_datlen = length;
|
|
p_tbd->cbd_bufaddr = (u32)packet;
|
|
p_tbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
|
|
info->tx_idx = (info->tx_idx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
|
|
|
|
/* Enable DMA transmit task */
|
|
MCD_continDma(info->tx_task);
|
|
|
|
info->clean_tbd_num -= 1;
|
|
|
|
/* wait until frame is sent . */
|
|
while (p_tbd->cbd_sc & BD_ENET_TX_READY)
|
|
udelay(10);
|
|
|
|
return (int)(info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS);
|
|
}
|
|
|
|
static int mcdmafec_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
volatile fecdma_t *fecp = (fecdma_t *)info->iobase;
|
|
|
|
cbd_t *prbd = &info->rxbd[info->rx_idx];
|
|
u32 ievent;
|
|
int frame_length, len = 0;
|
|
|
|
/* Check if any critical events have happened */
|
|
ievent = fecp->eir;
|
|
if (ievent != 0) {
|
|
fecp->eir = ievent;
|
|
|
|
if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
|
|
printf("fec_recv: error\n");
|
|
fec_halt(dev);
|
|
fec_init(dev);
|
|
return 0;
|
|
}
|
|
|
|
if (ievent & FEC_EIR_HBERR) {
|
|
/* Heartbeat error */
|
|
fecp->tcr |= FEC_TCR_GTS;
|
|
}
|
|
|
|
if (ievent & FEC_EIR_GRA) {
|
|
/* Graceful stop complete */
|
|
if (fecp->tcr & FEC_TCR_GTS) {
|
|
printf("fec_recv: tcr_gts\n");
|
|
fec_halt(dev);
|
|
fecp->tcr &= ~FEC_TCR_GTS;
|
|
fec_init(dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) {
|
|
if ((prbd->cbd_sc & BD_ENET_RX_LAST) &&
|
|
!(prbd->cbd_sc & BD_ENET_RX_ERR) &&
|
|
((prbd->cbd_datlen - 4) > 14)) {
|
|
/* Get buffer address and size */
|
|
frame_length = prbd->cbd_datlen - 4;
|
|
|
|
/* Fill the buffer and pass it to upper layers */
|
|
net_process_received_packet((uchar *)prbd->cbd_bufaddr,
|
|
frame_length);
|
|
len = frame_length;
|
|
}
|
|
|
|
/* Reset buffer descriptor as empty */
|
|
if (info->rx_idx == (PKTBUFSRX - 1))
|
|
prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
|
|
else
|
|
prbd->cbd_sc = BD_ENET_RX_EMPTY;
|
|
|
|
prbd->cbd_datlen = PKTSIZE_ALIGN;
|
|
|
|
/* Now, we have an empty RxBD, restart the DMA receive task */
|
|
MCD_continDma(info->rx_task);
|
|
|
|
/* Increment BD count */
|
|
info->rx_idx = (info->rx_idx + 1) % PKTBUFSRX;
|
|
}
|
|
|
|
return len;
|
|
}
|
|
|
|
static void mcdmafec_halt(struct udevice *dev)
|
|
{
|
|
fec_halt(dev);
|
|
}
|
|
|
|
static const struct eth_ops mcdmafec_ops = {
|
|
.start = mcdmafec_init,
|
|
.send = mcdmafec_send,
|
|
.recv = mcdmafec_recv,
|
|
.stop = mcdmafec_halt,
|
|
};
|
|
|
|
/*
|
|
* Boot sequence, called just after mcffec_ofdata_to_platdata,
|
|
* as DM way, it replaces old mcffec_initialize.
|
|
*/
|
|
static int mcdmafec_probe(struct udevice *dev)
|
|
{
|
|
struct fec_info_dma *info = dev->priv;
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
int node = dev_of_offset(dev);
|
|
int retval;
|
|
const u32 *val;
|
|
|
|
info->index = dev->seq;
|
|
info->iobase = pdata->iobase;
|
|
info->miibase = pdata->iobase;
|
|
info->phy_addr = -1;
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "rx-task", NULL);
|
|
if (val)
|
|
info->rx_task = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "tx-task", NULL);
|
|
if (val)
|
|
info->tx_task = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "rx-prioprity", NULL);
|
|
if (val)
|
|
info->rx_pri = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "tx-prioprity", NULL);
|
|
if (val)
|
|
info->tx_pri = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "rx-init", NULL);
|
|
if (val)
|
|
info->rx_init = fdt32_to_cpu(*val);
|
|
|
|
val = fdt_getprop(gd->fdt_blob, node, "tx-init", NULL);
|
|
if (val)
|
|
info->tx_init = fdt32_to_cpu(*val);
|
|
|
|
#ifdef CONFIG_SYS_FEC_BUF_USE_SRAM
|
|
u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000;
|
|
#endif
|
|
init_eth_info(info);
|
|
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
info->bus = mdio_alloc();
|
|
if (!info->bus)
|
|
return -ENOMEM;
|
|
strncpy(info->bus->name, dev->name, MDIO_NAME_LEN);
|
|
info->bus->read = mcffec_miiphy_read;
|
|
info->bus->write = mcffec_miiphy_write;
|
|
|
|
retval = mdio_register(info->bus);
|
|
if (retval < 0)
|
|
return retval;
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mcdmafec_remove(struct udevice *dev)
|
|
{
|
|
struct fec_info_dma *priv = dev_get_priv(dev);
|
|
|
|
mdio_unregister(priv->bus);
|
|
mdio_free(priv->bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Boot sequence, called 1st
|
|
*/
|
|
static int mcdmafec_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
const u32 *val;
|
|
|
|
pdata->iobase = dev_read_addr(dev);
|
|
/* Default to 10Mbit/s */
|
|
pdata->max_speed = 10;
|
|
|
|
val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL);
|
|
if (val)
|
|
pdata->max_speed = fdt32_to_cpu(*val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id mcdmafec_ids[] = {
|
|
{ .compatible = "fsl,mcf-dma-fec" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mcffec) = {
|
|
.name = "mcdmafec",
|
|
.id = UCLASS_ETH,
|
|
.of_match = mcdmafec_ids,
|
|
.ofdata_to_platdata = mcdmafec_ofdata_to_platdata,
|
|
.probe = mcdmafec_probe,
|
|
.remove = mcdmafec_remove,
|
|
.ops = &mcdmafec_ops,
|
|
.priv_auto_alloc_size = sizeof(struct fec_info_dma),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|