u-boot/arch/arm/cpu/armv8/generic_timer.c
Simon Glass cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00

116 lines
2.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013
* David Feng <fenghua@phytium.com.cn>
*/
#include <common.h>
#include <bootstage.h>
#include <command.h>
#include <time.h>
#include <asm/system.h>
#include <linux/bitops.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Generic timer implementation of get_tbclk()
*/
unsigned long get_tbclk(void)
{
unsigned long cntfrq;
asm volatile("mrs %0, cntfrq_el0" : "=r" (cntfrq));
return cntfrq;
}
#ifdef CONFIG_SYS_FSL_ERRATUM_A008585
/*
* FSL erratum A-008585 says that the ARM generic timer counter "has the
* potential to contain an erroneous value for a small number of core
* clock cycles every time the timer value changes".
* This sometimes leads to a consecutive counter read returning a lower
* value than the previous one, thus reporting the time to go backwards.
* The workaround is to read the counter twice and only return when the value
* was the same in both reads.
* Assumes that the CPU runs in much higher frequency than the timer.
*/
unsigned long timer_read_counter(void)
{
unsigned long cntpct;
unsigned long temp;
isb();
asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
while (temp != cntpct) {
asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
asm volatile("mrs %0, cntpct_el0" : "=r" (temp));
}
return cntpct;
}
#elif CONFIG_SUNXI_A64_TIMER_ERRATUM
/*
* This erratum sometimes flips the lower 11 bits of the counter value
* to all 0's or all 1's, leading to jumps forwards or backwards.
* Backwards jumps might be interpreted all roll-overs and be treated as
* huge jumps forward.
* The workaround is to check whether the lower 11 bits of the counter are
* all 0 or all 1, then discard this value and read again.
* This occasionally discards valid values, but will catch all erroneous
* reads and fixes the problem reliably. Also this mostly requires only a
* single read, so does not have any significant overhead.
* The algorithm was conceived by Samuel Holland.
*/
unsigned long timer_read_counter(void)
{
unsigned long cntpct;
isb();
do {
asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
} while (((cntpct + 1) & GENMASK(10, 0)) <= 1);
return cntpct;
}
#else
/*
* timer_read_counter() using the Arm Generic Timer (aka arch timer).
*/
unsigned long timer_read_counter(void)
{
unsigned long cntpct;
isb();
asm volatile("mrs %0, cntpct_el0" : "=r" (cntpct));
return cntpct;
}
#endif
uint64_t get_ticks(void)
{
unsigned long ticks = timer_read_counter();
gd->arch.tbl = ticks;
return ticks;
}
unsigned long usec2ticks(unsigned long usec)
{
ulong ticks;
if (usec < 1000)
ticks = ((usec * (get_tbclk()/1000)) + 500) / 1000;
else
ticks = ((usec / 10) * (get_tbclk() / 100000));
return ticks;
}
ulong timer_get_boot_us(void)
{
u64 val = get_ticks() * 1000000;
return val / get_tbclk();
}