mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
8875bdb341
Newer SST flashes have dropped the Auto Address Increment (AAI) word programming (WP) modes in favor of the standard page programming mode that most flashes now support. So add a flags field to the different flashes to support both modes with new and old styles. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
288 lines
6.5 KiB
C
288 lines
6.5 KiB
C
/*
|
|
* Driver for SST serial flashes
|
|
*
|
|
* (C) Copyright 2000-2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
* Copyright 2008, Network Appliance Inc.
|
|
* Jason McMullan <mcmullan@netapp.com>
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
* Copyright (c) 2008-2009 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi_flash.h>
|
|
|
|
#include "spi_flash_internal.h"
|
|
|
|
#define CMD_SST_WREN 0x06 /* Write Enable */
|
|
#define CMD_SST_WRDI 0x04 /* Write Disable */
|
|
#define CMD_SST_RDSR 0x05 /* Read Status Register */
|
|
#define CMD_SST_WRSR 0x01 /* Write Status Register */
|
|
#define CMD_SST_READ 0x03 /* Read Data Bytes */
|
|
#define CMD_SST_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
|
|
#define CMD_SST_BP 0x02 /* Byte Program */
|
|
#define CMD_SST_AAI_WP 0xAD /* Auto Address Increment Word Program */
|
|
#define CMD_SST_SE 0x20 /* Sector Erase */
|
|
|
|
#define SST_SR_WIP (1 << 0) /* Write-in-Progress */
|
|
#define SST_SR_WEL (1 << 1) /* Write enable */
|
|
#define SST_SR_BP0 (1 << 2) /* Block Protection 0 */
|
|
#define SST_SR_BP1 (1 << 3) /* Block Protection 1 */
|
|
#define SST_SR_BP2 (1 << 4) /* Block Protection 2 */
|
|
#define SST_SR_AAI (1 << 6) /* Addressing mode */
|
|
#define SST_SR_BPL (1 << 7) /* BP bits lock */
|
|
|
|
#define SST_FEAT_WP (1 << 0) /* Supports AAI word program */
|
|
#define SST_FEAT_MBP (1 << 1) /* Supports multibyte program */
|
|
|
|
struct sst_spi_flash_params {
|
|
u8 idcode1;
|
|
u8 flags;
|
|
u16 nr_sectors;
|
|
const char *name;
|
|
};
|
|
|
|
struct sst_spi_flash {
|
|
struct spi_flash flash;
|
|
const struct sst_spi_flash_params *params;
|
|
};
|
|
|
|
static inline struct sst_spi_flash *to_sst_spi_flash(struct spi_flash *flash)
|
|
{
|
|
return container_of(flash, struct sst_spi_flash, flash);
|
|
}
|
|
|
|
#define SST_SECTOR_SIZE (4 * 1024)
|
|
#define SST_PAGE_SIZE 256
|
|
static const struct sst_spi_flash_params sst_spi_flash_table[] = {
|
|
{
|
|
.idcode1 = 0x8d,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 128,
|
|
.name = "SST25VF040B",
|
|
},{
|
|
.idcode1 = 0x8e,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 256,
|
|
.name = "SST25VF080B",
|
|
},{
|
|
.idcode1 = 0x41,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 512,
|
|
.name = "SST25VF016B",
|
|
},{
|
|
.idcode1 = 0x4a,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 1024,
|
|
.name = "SST25VF032B",
|
|
},{
|
|
.idcode1 = 0x4b,
|
|
.flags = SST_FEAT_MBP,
|
|
.nr_sectors = 2048,
|
|
.name = "SST25VF064C",
|
|
},{
|
|
.idcode1 = 0x01,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 16,
|
|
.name = "SST25WF512",
|
|
},{
|
|
.idcode1 = 0x02,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 32,
|
|
.name = "SST25WF010",
|
|
},{
|
|
.idcode1 = 0x03,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 64,
|
|
.name = "SST25WF020",
|
|
},{
|
|
.idcode1 = 0x04,
|
|
.flags = SST_FEAT_WP,
|
|
.nr_sectors = 128,
|
|
.name = "SST25WF040",
|
|
},
|
|
};
|
|
|
|
static int
|
|
sst_enable_writing(struct spi_flash *flash)
|
|
{
|
|
int ret = spi_flash_cmd_write_enable(flash);
|
|
if (ret)
|
|
debug("SF: Enabling Write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sst_disable_writing(struct spi_flash *flash)
|
|
{
|
|
int ret = spi_flash_cmd_write_disable(flash);
|
|
if (ret)
|
|
debug("SF: Disabling Write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sst_byte_write(struct spi_flash *flash, u32 offset, const void *buf)
|
|
{
|
|
int ret;
|
|
u8 cmd[4] = {
|
|
CMD_SST_BP,
|
|
offset >> 16,
|
|
offset >> 8,
|
|
offset,
|
|
};
|
|
|
|
debug("BP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
|
|
spi_w8r8(flash->spi, CMD_SST_RDSR), buf, cmd[0], offset);
|
|
|
|
ret = sst_enable_writing(flash);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd), buf, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
|
|
}
|
|
|
|
static int
|
|
sst_write_wp(struct spi_flash *flash, u32 offset, size_t len, const void *buf)
|
|
{
|
|
size_t actual, cmd_len;
|
|
int ret;
|
|
u8 cmd[4];
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: Unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
/* If the data is not word aligned, write out leading single byte */
|
|
actual = offset % 2;
|
|
if (actual) {
|
|
ret = sst_byte_write(flash, offset, buf);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
offset += actual;
|
|
|
|
ret = sst_enable_writing(flash);
|
|
if (ret)
|
|
goto done;
|
|
|
|
cmd_len = 4;
|
|
cmd[0] = CMD_SST_AAI_WP;
|
|
cmd[1] = offset >> 16;
|
|
cmd[2] = offset >> 8;
|
|
cmd[3] = offset;
|
|
|
|
for (; actual < len - 1; actual += 2) {
|
|
debug("WP[%02x]: 0x%p => cmd = { 0x%02x 0x%06x }\n",
|
|
spi_w8r8(flash->spi, CMD_SST_RDSR), buf + actual, cmd[0],
|
|
offset);
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, cmd_len,
|
|
buf + actual, 2);
|
|
if (ret) {
|
|
debug("SF: sst word program failed\n");
|
|
break;
|
|
}
|
|
|
|
ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
|
|
if (ret)
|
|
break;
|
|
|
|
cmd_len = 1;
|
|
offset += 2;
|
|
}
|
|
|
|
if (!ret)
|
|
ret = sst_disable_writing(flash);
|
|
|
|
/* If there is a single trailing byte, write it out */
|
|
if (!ret && actual != len)
|
|
ret = sst_byte_write(flash, offset, buf + actual);
|
|
|
|
done:
|
|
debug("SF: sst: program %s %zu bytes @ 0x%zx\n",
|
|
ret ? "failure" : "success", len, offset - actual);
|
|
|
|
spi_release_bus(flash->spi);
|
|
return ret;
|
|
}
|
|
|
|
static int sst_erase(struct spi_flash *flash, u32 offset, size_t len)
|
|
{
|
|
return spi_flash_cmd_erase(flash, CMD_SST_SE, offset, len);
|
|
}
|
|
|
|
static int
|
|
sst_unlock(struct spi_flash *flash)
|
|
{
|
|
int ret;
|
|
u8 cmd, status;
|
|
|
|
ret = sst_enable_writing(flash);
|
|
if (ret)
|
|
return ret;
|
|
|
|
cmd = CMD_SST_WRSR;
|
|
status = 0;
|
|
ret = spi_flash_cmd_write(flash->spi, &cmd, 1, &status, 1);
|
|
if (ret)
|
|
debug("SF: Unable to set status byte\n");
|
|
|
|
debug("SF: sst: status = %x\n", spi_w8r8(flash->spi, CMD_SST_RDSR));
|
|
|
|
return ret;
|
|
}
|
|
|
|
struct spi_flash *
|
|
spi_flash_probe_sst(struct spi_slave *spi, u8 *idcode)
|
|
{
|
|
const struct sst_spi_flash_params *params;
|
|
struct sst_spi_flash *stm;
|
|
size_t i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sst_spi_flash_table); ++i) {
|
|
params = &sst_spi_flash_table[i];
|
|
if (params->idcode1 == idcode[2])
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(sst_spi_flash_table)) {
|
|
debug("SF: Unsupported SST ID %02x\n", idcode[1]);
|
|
return NULL;
|
|
}
|
|
|
|
stm = malloc(sizeof(*stm));
|
|
if (!stm) {
|
|
debug("SF: Failed to allocate memory\n");
|
|
return NULL;
|
|
}
|
|
|
|
stm->params = params;
|
|
stm->flash.spi = spi;
|
|
stm->flash.name = params->name;
|
|
|
|
if (stm->params->flags & SST_FEAT_WP)
|
|
stm->flash.write = sst_write_wp;
|
|
else
|
|
stm->flash.write = spi_flash_cmd_write_multi;
|
|
stm->flash.erase = sst_erase;
|
|
stm->flash.read = spi_flash_cmd_read_fast;
|
|
stm->flash.page_size = SST_PAGE_SIZE;
|
|
stm->flash.sector_size = SST_SECTOR_SIZE;
|
|
stm->flash.size = stm->flash.sector_size * params->nr_sectors;
|
|
|
|
/* Flash powers up read-only, so clear BP# bits */
|
|
sst_unlock(&stm->flash);
|
|
|
|
return &stm->flash;
|
|
}
|