Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-17 10:18:38 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/mpl/vcma9/lowlevel_init.S
Rob Herring 7682a99826 remove unnecessary version.h includes 
Various files are needlessly rebuilt every time due to the version and
build time changing. As version.h is not actually needed, remove the
include.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Macpaul Lin <macpaul@andestech.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: York Sun <yorksun@freescale.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Philippe Reynes <tremyfr@yahoo.fr>
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Cc: "David Müller" <d.mueller@elsoft.ch>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Torsten Koschorrek <koschorrek@synertronixx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Łukasz Majewski <l.majewski@samsung.com>
2015-03-24 10:50:50 -04:00

500 lines
13 KiB
ArmAsm
Raw Blame History

/*
* Memory Setup stuff - taken from blob memsetup.S
*
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
*
* Modified for MPL VCMA9 by
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
* (C) Copyright 2002, 2003, 2004, 2005
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
/* register definitions */
#define PLD_BASE 0x28000000
#define MISC_REG 0x103
#define SDRAM_REG 0x106
#define BWSCON 0x48000000
#define CLKBASE 0x4C000000
#define LOCKTIME 0x0
#define MPLLCON 0x4
#define UPLLCON 0x8
#define GPIOBASE 0x56000000
#define GSTATUS1 0xB0
#define FASTCPU 0x02
/* some parameters for the board */
/* BWSCON */
#define DW8 (0x0)
#define DW16 (0x1)
#define DW32 (0x2)
#define WAIT (0x1<<2)
#define UBLB (0x1<<3)
/* BANKSIZE */
#define BURST_EN (0x1<<7)
/* BANK0CON 200 */
#define B0_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
#define B0_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
#define B0_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
#define B0_Tcoh_200 0x0 /* 0clk */
#define B0_Tcah_200 0x3 /* 4clk (or0x01 1clk) */
#define B0_Tacp_200 0x0 /* page mode is not used */
#define B0_PMC_200 0x0 /* page mode disabled */
/* BANK0CON 250 */
#define B0_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
#define B0_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
#define B0_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
#define B0_Tcoh_250 0x0 /* 0clk */
#define B0_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
#define B0_Tacp_250 0x0 /* page mode is not used */
#define B0_PMC_250 0x0 /* page mode disabled */
/* BANK0CON 266 */
#define B0_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
#define B0_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
#define B0_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
#define B0_Tcoh_266 0x0 /* 0clk */
#define B0_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
#define B0_Tacp_266 0x0 /* page mode is not used */
#define B0_PMC_266 0x0 /* page mode disabled */
/* BANK1CON 200 */
#define B1_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
#define B1_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
#define B1_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
#define B1_Tcoh_200 0x0 /* 0clk */
#define B1_Tcah_200 0x3 /* 4clk (or 0x1 1clk) */
#define B1_Tacp_200 0x0 /* page mode is not used */
#define B1_PMC_200 0x0 /* page mode disabled */
/* BANK1CON 250 */
#define B1_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
#define B1_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
#define B1_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
#define B1_Tcoh_250 0x0 /* 0clk */
#define B1_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
#define B1_Tacp_250 0x0 /* page mode is not used */
#define B1_PMC_250 0x0 /* page mode disabled */
/* BANK1CON 266 */
#define B1_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
#define B1_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
#define B1_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
#define B1_Tcoh_266 0x0 /* 0clk */
#define B1_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
#define B1_Tacp_266 0x0 /* page mode is not used */
#define B1_PMC_266 0x0 /* page mode disabled */
/* BANK2CON 200 + 250 + 266 */
#define B2_Tacs 0x3 /* 4clk */
#define B2_Tcos 0x3 /* 4clk */
#define B2_Tacc 0x7 /* 14clk */
#define B2_Tcoh 0x3 /* 4clk */
#define B2_Tcah 0x3 /* 4clk */
#define B2_Tacp 0x0 /* page mode is not used */
#define B2_PMC 0x0 /* page mode disabled */
/* BANK3CON 200 + 250 + 266 */
#define B3_Tacs 0x3 /* 4clk */
#define B3_Tcos 0x3 /* 4clk */
#define B3_Tacc 0x7 /* 14clk */
#define B3_Tcoh 0x3 /* 4clk */
#define B3_Tcah 0x3 /* 4clk */
#define B3_Tacp 0x0 /* page mode is not used */
#define B3_PMC 0x0 /* page mode disabled */
/* BANK4CON 200 */
#define B4_Tacs_200 0x1 /* 1clk */
#define B4_Tcos_200 0x3 /* 4clk */
#define B4_Tacc_200 0x7 /* 14clk */
#define B4_Tcoh_200 0x3 /* 4clk */
#define B4_Tcah_200 0x2 /* 2clk */
#define B4_Tacp_200 0x0 /* page mode is not used */
#define B4_PMC_200 0x0 /* page mode disabled */
/* BANK4CON 250 */
#define B4_Tacs_250 0x1 /* 1clk */
#define B4_Tcos_250 0x3 /* 4clk */
#define B4_Tacc_250 0x7 /* 14clk */
#define B4_Tcoh_250 0x3 /* 4clk */
#define B4_Tcah_250 0x2 /* 2clk */
#define B4_Tacp_250 0x0 /* page mode is not used */
#define B4_PMC_250 0x0 /* page mode disabled */
/* BANK4CON 266 */
#define B4_Tacs_266 0x1 /* 1clk */
#define B4_Tcos_266 0x3 /* 4clk */
#define B4_Tacc_266 0x7 /* 14clk */
#define B4_Tcoh_266 0x3 /* 4clk */
#define B4_Tcah_266 0x2 /* 2clk */
#define B4_Tacp_266 0x0 /* page mode is not used */
#define B4_PMC_266 0x0 /* page mode disabled */
/* BANK5CON 200 */
#define B5_Tacs_200 0x0 /* 0clk */
#define B5_Tcos_200 0x3 /* 4clk */
#define B5_Tacc_200 0x4 /* 6clk */
#define B5_Tcoh_200 0x3 /* 4clk */
#define B5_Tcah_200 0x1 /* 1clk */
#define B5_Tacp_200 0x0 /* page mode is not used */
#define B5_PMC_200 0x0 /* page mode disabled */
/* BANK5CON 250 */
#define B5_Tacs_250 0x0 /* 0clk */
#define B5_Tcos_250 0x3 /* 4clk */
#define B5_Tacc_250 0x5 /* 8clk */
#define B5_Tcoh_250 0x3 /* 4clk */
#define B5_Tcah_250 0x1 /* 1clk */
#define B5_Tacp_250 0x0 /* page mode is not used */
#define B5_PMC_250 0x0 /* page mode disabled */
/* BANK5CON 266 */
#define B5_Tacs_266 0x0 /* 0clk */
#define B5_Tcos_266 0x3 /* 4clk */
#define B5_Tacc_266 0x5 /* 8clk */
#define B5_Tcoh_266 0x3 /* 4clk */
#define B5_Tcah_266 0x1 /* 1clk */
#define B5_Tacp_266 0x0 /* page mode is not used */
#define B5_PMC_266 0x0 /* page mode disabled */
#define B6_MT 0x3 /* SDRAM */
#define B6_Trcd_200 0x0 /* 2clk */
#define B6_Trcd_250 0x1 /* 3clk */
#define B6_Trcd_266 0x1 /* 3clk */
#define B6_SCAN 0x2 /* 10bit */
#define B7_MT 0x3 /* SDRAM */
#define B7_Trcd_200 0x0 /* 2clk */
#define B7_Trcd_250 0x1 /* 3clk */
#define B7_Trcd_266 0x1 /* 3clk */
#define B7_SCAN 0x2 /* 10bit */
/* REFRESH parameter */
#define REFEN 0x1 /* Refresh enable */
#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
#define Trp_200 0x0 /* 2clk */
#define Trp_250 0x1 /* 3clk */
#define Trp_266 0x1 /* 3clk */
#define Tsrc_200 0x1 /* 5clk */
#define Tsrc_250 0x2 /* 6clk */
#define Tsrc_266 0x3 /* 7clk */
/* period=15.6us, HCLK=100Mhz, (2048+1-15.6*100) */
#define REFCNT_200 489
/* period=15.6us, HCLK=125Mhz, (2048+1-15.6*125) */
#define REFCNT_250 99
/* period=15.6us, HCLK=133Mhz, (2048+1-15.6*133) */
#define REFCNT_266 0
/**************************************/
.globl lowlevel_init
lowlevel_init:
/* use r0 to relocate DATA read/write to flash rather than memory ! */
ldr r0, =CONFIG_SYS_TEXT_BASE
ldr r13, =BWSCON
/* enable minimal access to PLD */
ldr r1, [r13] /* load default BWSCON */
orr r1, r1, #(DW8 + UBLB) << 20 /* set necessary CS attrs */
str r1, [r13] /* set BWSCON */
ldr r1, =0x7FF0 /* select slowest timing */
str r1, [r13, #0x18] /* set BANKCON5 */
ldr r1, =PLD_BASE
ldr r2, =SETUPDATA
ldrb r1, [r1, #MISC_REG]
sub r2, r2, r0
tst r1, #FASTCPU /* FASTCPU available ? */
addeq r2, r2, #SETUPENTRY_SIZE
/* memory control configuration */
/* r2 = pointer into timing table */
/* r13 = pointer to MEM controller regs (starting with BWSCON) */
add r3, r2, #CSDATA_OFFSET
add r4, r3, #CSDATAENTRY_SIZE
0:
ldr r1, [r3], #4
str r1, [r13], #4
cmp r3, r4
bne 0b
/* PLD access is now possible */
/* r3 = SDRAMDATA */
/* r13 = pointer to MEM controller regs */
ldr r1, =PLD_BASE
mov r4, #SDRAMENTRY_SIZE
ldrb r1, [r1, #SDRAM_REG]
/* calculate start and end point */
mla r3, r4, r1, r3
add r4, r3, r4
0:
ldr r1, [r3], #4
str r1, [r13], #4
cmp r3, r4
bne 0b
/* setup MPLL registers */
ldr r1, =CLKBASE
ldr r4, =0xFFFFFF
add r3, r2, #4 /* r3 points to PLL values */
str r4, [r1, #LOCKTIME]
ldmia r3, {r4,r5}
str r5, [r1, #UPLLCON] /* writing PLL register */
/* !! order seems to be important !! */
/* a little delay */
ldr r3, =0x4000
0:
subs r3, r3, #1
bne 0b
str r4, [r1, #MPLLCON] /* writing PLL register */
/* !! order seems to be important !! */
/* a little delay */
ldr r3, =0x4000
0:
subs r3, r3, #1
bne 0b
/* everything is fine now */
mov pc, lr
.ltorg
/* the literal pools origin */
#define MK_BWSCON(bws1, bws2, bws3, bws4, bws5, bws6, bws7) \
((bws1) << 4) + \
((bws2) << 8) + \
((bws3) << 12) + \
((bws4) << 16) + \
((bws5) << 20) + \
((bws6) << 24) + \
((bws7) << 28)
#define MK_BANKCON(tacs, tcos, tacc, tcoh, tcah, tacp, pmc) \
((tacs) << 13) + \
((tcos) << 11) + \
((tacc) << 8) + \
((tcoh) << 6) + \
((tcah) << 4) + \
((tacp) << 2) + \
(pmc)
#define MK_BANKCON_SDRAM(trcd, scan) \
((0x03) << 15) + \
((trcd) << 2) + \
(scan)
#define MK_SDRAM_REFRESH(enable, trefmd, trp, tsrc, cnt) \
((enable) << 23) + \
((trefmd) << 22) + \
((trp) << 20) + \
((tsrc) << 18) + \
(cnt)
SETUPDATA:
.word 0x32410002
/* PLL values (MDIV, PDIV, SDIV) for 250 MHz */
.word (0x75 << 12) + (0x01 << 4) + (0x01 << 0)
/* PLL values for USB clock */
.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
/* timing for 250 MHz*/
0:
.equiv CSDATA_OFFSET, (. - SETUPDATA)
.word MK_BWSCON(DW16, \
DW32, \
DW32, \
DW16 + WAIT + UBLB, \
DW8 + UBLB, \
DW32, \
DW32)
.word MK_BANKCON(B0_Tacs_250, \
B0_Tcos_250, \
B0_Tacc_250, \
B0_Tcoh_250, \
B0_Tcah_250, \
B0_Tacp_250, \
B0_PMC_250)
.word MK_BANKCON(B1_Tacs_250, \
B1_Tcos_250, \
B1_Tacc_250, \
B1_Tcoh_250, \
B1_Tcah_250, \
B1_Tacp_250, \
B1_PMC_250)
.word MK_BANKCON(B2_Tacs, \
B2_Tcos, \
B2_Tacc, \
B2_Tcoh, \
B2_Tcah, \
B2_Tacp, \
B2_PMC)
.word MK_BANKCON(B3_Tacs, \
B3_Tcos, \
B3_Tacc, \
B3_Tcoh, \
B3_Tcah, \
B3_Tacp, \
B3_PMC)
.word MK_BANKCON(B4_Tacs_250, \
B4_Tcos_250, \
B4_Tacc_250, \
B4_Tcoh_250, \
B4_Tcah_250, \
B4_Tacp_250, \
B4_PMC_250)
.word MK_BANKCON(B5_Tacs_250, \
B5_Tcos_250, \
B5_Tacc_250, \
B5_Tcoh_250, \
B5_Tcah_250, \
B5_Tacp_250, \
B5_PMC_250)
.equiv CSDATAENTRY_SIZE, (. - 0b)
/* 4Mx8x4 */
0:
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
.equiv SDRAMENTRY_SIZE, (. - 0b)
/* 8Mx8x4 */
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
/* 2Mx8x4 */
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
/* 4Mx8x2 */
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
.equiv SETUPENTRY_SIZE, (. - SETUPDATA)
.word 0x32410000
/* PLL values (MDIV, PDIV, SDIV) for 200 MHz (Fout = 202.8MHz) */
.word (0xA1 << 12) + (0x03 << 4) + (0x01 << 0)
/* PLL values for USB clock */
.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
/* timing for 200 MHz and default*/
.word MK_BWSCON(DW16, \
DW32, \
DW32, \
DW16 + WAIT + UBLB, \
DW8 + UBLB, \
DW32, \
DW32)
.word MK_BANKCON(B0_Tacs_200, \
B0_Tcos_200, \
B0_Tacc_200, \
B0_Tcoh_200, \
B0_Tcah_200, \
B0_Tacp_200, \
B0_PMC_200)
.word MK_BANKCON(B1_Tacs_200, \
B1_Tcos_200, \
B1_Tacc_200, \
B1_Tcoh_200, \
B1_Tcah_200, \
B1_Tacp_200, \
B1_PMC_200)
.word MK_BANKCON(B2_Tacs, \
B2_Tcos, \
B2_Tacc, \
B2_Tcoh, \
B2_Tcah, \
B2_Tacp, \
B2_PMC)
.word MK_BANKCON(B3_Tacs, \
B3_Tcos, \
B3_Tacc, \
B3_Tcoh, \
B3_Tcah, \
B3_Tacp, \
B3_PMC)
.word MK_BANKCON(B4_Tacs_200, \
B4_Tcos_200, \
B4_Tacc_200, \
B4_Tcoh_200, \
B4_Tcah_200, \
B4_Tacp_200, \
B4_PMC_200)
.word MK_BANKCON(B5_Tacs_200, \
B5_Tcos_200, \
B5_Tacc_200, \
B5_Tcoh_200, \
B5_Tcah_200, \
B5_Tacp_200, \
B5_PMC_200)
/* 4Mx8x4 */
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
/* 8Mx8x4 */
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
/* 2Mx8x4 */
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
/* 4Mx8x2 */
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
.word 0x32 + BURST_EN
.word 0x30
.word 0x30
.equiv SETUPDATA_SIZE, (. - SETUPDATA)
Reference in a new issue View git blame Copy permalink