u-boot/board/sbc8349/sbc8349.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

229 lines
5.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* sbc8349.c -- WindRiver SBC8349 board support.
* Copyright (c) 2006-2007 Wind River Systems, Inc.
*
* Paul Gortmaker <paul.gortmaker@windriver.com>
* Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
#include <spd_sdram.h>
#include <miiphy.h>
#if defined(CONFIG_OF_LIBFDT)
#include <linux/libfdt.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
int fixed_sdram(void);
void sdram_init(void);
#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
void ddr_enable_ecc(unsigned int dram_size);
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f (void)
{
return 0;
}
#endif
#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
int dram_init(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
/* DDR SDRAM - Main SODIMM */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
#if defined(CONFIG_SPD_EEPROM)
msize = spd_sdram();
#else
msize = fixed_sdram();
#endif
/*
* Initialize SDRAM if it is on local bus.
*/
sdram_init();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
ddr_enable_ecc(msize * 1024 * 1024);
#endif
/* set total bus SDRAM size(bytes) -- DDR */
gd->ram_size = msize * 1024 * 1024;
return 0;
}
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = CONFIG_SYS_DDR_SIZE;
u32 ddr_size = msize << 20; /* DDR size in bytes */
u32 ddr_size_log2 = __ilog2(msize);
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CONFIG_SYS_DDR_SIZE != 256)
#warning Currently any ddr size other than 256 is not supported
#endif
#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
#warning Chip select bounds is only configurable in 16MB increments
#endif
im->ddr.csbnds[2].csbnds =
((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
(((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
CSBNDS_EA_SHIFT) & CSBNDS_EA);
im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
/* currently we use only one CS, so disable the other banks */
im->ddr.cs_config[0] = 0;
im->ddr.cs_config[1] = 0;
im->ddr.cs_config[3] = 0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
im->ddr.sdram_cfg =
SDRAM_CFG_SREN
#if defined(CONFIG_DDR_2T_TIMING)
| SDRAM_CFG_2T_EN
#endif
| SDRAM_CFG_SDRAM_TYPE_DDR1;
#if defined (CONFIG_DDR_32BIT)
/* for 32-bit mode burst length is 8 */
im->ddr.sdram_cfg |= (SDRAM_CFG_32_BE | SDRAM_CFG_8_BE);
#endif
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
udelay(200);
/* enable DDR controller */
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
return msize;
}
#endif/*!CONFIG_SYS_SPD_EEPROM*/
int checkboard (void)
{
puts("Board: Wind River SBC834x\n");
return 0;
}
/*
* if board is fitted with SDRAM
*/
#if defined(CONFIG_SYS_BR2_PRELIM) \
&& defined(CONFIG_SYS_OR2_PRELIM) \
&& defined(CONFIG_SYS_LBLAWBAR2_PRELIM) \
&& defined(CONFIG_SYS_LBLAWAR2_PRELIM)
/*
* Initialize SDRAM memory on the Local Bus.
*/
void sdram_init(void)
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile fsl_lbc_t *lbc = &immap->im_lbc;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
puts("\n SDRAM on Local Bus: ");
print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
/*
* Setup SDRAM Base and Option Registers, already done in cpu_init.c
*/
/* setup mtrpt, lsrt and lbcr for LB bus */
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
asm("sync");
/*
* Configure the SDRAM controller Machine Mode Register.
*/
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2; /* 0x48636733; auto refresh */
asm("sync");
/*1 times*/
*sdram_addr = 0xff;
udelay(100);
/*2 times*/
*sdram_addr = 0xff;
udelay(100);
/*3 times*/
*sdram_addr = 0xff;
udelay(100);
/*4 times*/
*sdram_addr = 0xff;
udelay(100);
/*5 times*/
*sdram_addr = 0xff;
udelay(100);
/*6 times*/
*sdram_addr = 0xff;
udelay(100);
/*7 times*/
*sdram_addr = 0xff;
udelay(100);
/*8 times*/
*sdram_addr = 0xff;
udelay(100);
/* 0x58636733; mode register write operation */
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
asm("sync");
*sdram_addr = 0xff;
udelay(100);
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* 0x40636733; normal operation */
asm("sync");
*sdram_addr = 0xff;
udelay(100);
}
#else
void sdram_init(void)
{
puts(" SDRAM on Local Bus: Disabled in config\n");
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
return 0;
}
#endif