mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
a605ea7e83
Board support for the Guntermann & Drunck CATCenter Io. Board support for the Guntermann & Drunck IoCon. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
181 lines
4 KiB
C
181 lines
4 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
#include <miiphy.h>
|
|
|
|
#include "../common/fpga.h"
|
|
|
|
#define PHYREG_CONTROL 0
|
|
#define PHYREG_PAGE_ADDRESS 22
|
|
#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16
|
|
#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26
|
|
|
|
enum {
|
|
REG_VERSIONS = 0x0002,
|
|
REG_FPGA_FEATURES = 0x0004,
|
|
REG_FPGA_VERSION = 0x0006,
|
|
REG_QUAD_SERDES_RESET = 0x0012,
|
|
};
|
|
|
|
enum {
|
|
UNITTYPE_CCD_SWITCH = 1,
|
|
};
|
|
|
|
enum {
|
|
HWVER_100 = 0,
|
|
HWVER_110 = 1,
|
|
HWVER_121 = 2,
|
|
HWVER_122 = 3,
|
|
};
|
|
|
|
int configure_gbit_phy(unsigned char addr)
|
|
{
|
|
unsigned short value;
|
|
|
|
/* select page 2 */
|
|
if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_PAGE_ADDRESS, 0x0002))
|
|
goto err_out;
|
|
/* disable SGMII autonegotiation */
|
|
if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a))
|
|
goto err_out;
|
|
/* select page 0 */
|
|
if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_PAGE_ADDRESS, 0x0000))
|
|
goto err_out;
|
|
/* switch from powerdown to normal operation */
|
|
if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value))
|
|
goto err_out;
|
|
if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004))
|
|
goto err_out;
|
|
/* reset phy so settings take effect */
|
|
if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
|
|
PHYREG_CONTROL, 0x9140))
|
|
goto err_out;
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
printf("Error writing to the PHY addr=%02x\n", addr);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
int checkboard(void)
|
|
{
|
|
char *s = getenv("serial#");
|
|
u16 versions = fpga_get_reg(REG_VERSIONS);
|
|
u16 fpga_version = fpga_get_reg(REG_FPGA_VERSION);
|
|
u16 fpga_features = fpga_get_reg(REG_FPGA_FEATURES);
|
|
unsigned unit_type;
|
|
unsigned hardware_version;
|
|
unsigned feature_channels;
|
|
unsigned feature_expansion;
|
|
|
|
unit_type = (versions & 0xf000) >> 12;
|
|
hardware_version = versions & 0x000f;
|
|
feature_channels = fpga_features & 0x007f;
|
|
feature_expansion = fpga_features & (1<<15);
|
|
|
|
printf("Board: ");
|
|
|
|
printf("CATCenter Io");
|
|
|
|
if (s != NULL) {
|
|
puts(", serial# ");
|
|
puts(s);
|
|
}
|
|
puts("\n ");
|
|
|
|
switch (unit_type) {
|
|
case UNITTYPE_CCD_SWITCH:
|
|
printf("CCD-Switch");
|
|
break;
|
|
|
|
default:
|
|
printf("UnitType %d(not supported)", unit_type);
|
|
break;
|
|
}
|
|
|
|
switch (hardware_version) {
|
|
case HWVER_100:
|
|
printf(" HW-Ver 1.00\n");
|
|
break;
|
|
|
|
case HWVER_110:
|
|
printf(" HW-Ver 1.10\n");
|
|
break;
|
|
|
|
case HWVER_121:
|
|
printf(" HW-Ver 1.21\n");
|
|
break;
|
|
|
|
case HWVER_122:
|
|
printf(" HW-Ver 1.22\n");
|
|
break;
|
|
|
|
default:
|
|
printf(" HW-Ver %d(not supported)\n",
|
|
hardware_version);
|
|
break;
|
|
}
|
|
|
|
printf(" FPGA V %d.%02d, features:",
|
|
fpga_version / 100, fpga_version % 100);
|
|
|
|
printf(" %d channel(s)", feature_channels);
|
|
|
|
printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* setup Gbit PHYs
|
|
*/
|
|
int last_stage_init(void)
|
|
{
|
|
unsigned int k;
|
|
|
|
miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
|
|
bb_miiphy_read, bb_miiphy_write);
|
|
|
|
for (k = 0; k < 32; ++k)
|
|
configure_gbit_phy(k);
|
|
|
|
/* take fpga serdes blocks out of reset */
|
|
fpga_set_reg(REG_QUAD_SERDES_RESET, 0);
|
|
|
|
return 0;
|
|
}
|