u-boot

mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 13:56:30 +00:00

History

Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>		2021-02-02 15:33:42 -05:00
..
Kconfig	omap3: omap3_logic: switch to using TI_COMMON_CMD_OPTION	2017-05-15 13:00:27 -04:00
MAINTAINERS	ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo	2018-10-06 14:09:27 -04:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
omap3logic.c	common: Drop asm/global_data.h from common header	2021-02-02 15:33:42 -05:00
omap3logic.h	ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards	2019-07-27 13:36:52 -04:00
README	ARM: LogicPD: omap3logic: Remove Torpedo/SOM-LV autodection	2018-10-06 14:09:40 -04:00

README

Summary
=======

The source for omap3logic.c encompases the OMAP35 and DM3730 SOM-LV and DM3730 Torpedo platforms, but there are device trees custom taylored to each board.

omap3_logic_defconfig = DM37 Torpedo / Torpedo + Wireless
omap35_logic_defconfig = OMAP35 Torpedo
omap3_logic_somlv_defconfig = DM37 SOM-LV
omap35_logic_somlv_defconfig = OMAP35 SOM-LV

The device tree included with each of the defconfig files will also direct the board as to which dtb file to load when loading the kernel, so it is not
recomended to mix and match the defconfig files.

Falcon Mode: FAT SD cards
=========================

In this case the additional file is written to the filesystem.  In this
example we assume that the uImage and device tree to be used are already on
the FAT filesystem (only the uImage MUST be for this to function
afterwards) along with a Falcon Mode aware MLO and the FAT partition has
already been created and marked bootable:

U-Boot # mmc rescan
# Load kernel and device tree into memory, perform export
U-Boot # fatload mmc 0 ${loadaddr} uImage
U-Boot # run loadfdt
U-Boot # setenv optargs quiet
U-Boot # run mmcargs
U-Boot # run common_bootargs
U-Boot # spl export fdt ${loadaddr} - ${fdtaddr}

This will print a number of lines and then end with something like:
   Loading Device Tree to 8dec9000, end 8dee0295 ... OK

So then note the starting address and write the args to mmc/sd:

U-Boot # fatwrite mmc 0:1 0x8dec9000 args 0x20000

The size of 0x20000 matches the CMD_SPL_WRITE_SIZE.

Falcon Mode: NAND
=================

In this case the additional data is written to another partition of the
NAND.  In this example we assume that the uImage and device tree to be are
already located on the NAND somewhere (such as filesystem or mtd partition)
along with a Falcon Mode aware MLO written to the correct locations for
booting and mtdparts have been configured correctly for the board:

U-Boot # nand read ${loadaddr} kernel
U-Boot # load nand rootfs ${fdtaddr} /boot/am335x-evm.dtb
U-Boot # run nandargs
U-Boot # run common_bootargs
U-Boot # spl export fdt ${loadaddr} - ${fdtaddr}
U-Boot # nand erase.part u-boot-spl-os
U-Boot # nand write ${fdtaddr} u-boot-spl-os