Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-04 02:20:25 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/CZ.NIC/turris_omnia/turris_omnia.c
Pali Rohár 029bb91e80 arm: mvebu: turris_{omnia, mox}: ensure running bootcmd_rescue always works 
One of the points of putting the rescue boot command into default
environment is that user can invoke it without physical access to the
board (without having to press the factory reset button), by running
  run bootcmd_rescue
in U-Boot's console.

Therefore we have to ensure that bootcmd_rescue is always set to default
value, regardless of whether the factory reset button was pressed.
Otherwise the variable will be empty for example after upgrade from
previous U-Boot.

Fixes: ec3784d626 ("arm: mvebu: turris_mox: add support for board rescue mode")
Fixes: 176c3e7760 ("arm: mvebu: turris_omnia: support invoking rescue boot from console")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
2021-06-15 07:21:54 +02:00

559 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
*
* Derived from the code for
* Marvell/db-88f6820-gp by Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <env.h>
#include <i2c.h>
#include <init.h>
#include <log.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
#include <dm/uclass.h>
#include <fdt_support.h>
#include <time.h>
#include <linux/bitops.h>
#include <u-boot/crc.h>
# include <atsha204a-i2c.h>
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
#include <../serdes/a38x/high_speed_env_spec.h>
DECLARE_GLOBAL_DATA_PTR;
#define OMNIA_I2C_BUS_NAME "i2c@11000->i2cmux@70->i2c@0"
#define OMNIA_I2C_MCU_CHIP_ADDR 0x2a
#define OMNIA_I2C_MCU_CHIP_LEN 1
#define OMNIA_I2C_EEPROM_CHIP_ADDR 0x54
#define OMNIA_I2C_EEPROM_CHIP_LEN 2
#define OMNIA_I2C_EEPROM_MAGIC 0x0341a034
enum mcu_commands {
CMD_GET_STATUS_WORD = 0x01,
CMD_GET_RESET = 0x09,
CMD_WATCHDOG_STATE = 0x0b,
};
enum status_word_bits {
CARD_DET_STSBIT = 0x0010,
MSATA_IND_STSBIT = 0x0020,
};
#define OMNIA_ATSHA204_OTP_VERSION 0
#define OMNIA_ATSHA204_OTP_SERIAL 1
#define OMNIA_ATSHA204_OTP_MAC0 3
#define OMNIA_ATSHA204_OTP_MAC1 4
/*
* Those values and defines are taken from the Marvell U-Boot version
* "u-boot-2013.01-2014_T3.0"
*/
#define OMNIA_GPP_OUT_ENA_LOW \
(~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \
BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
#define OMNIA_GPP_OUT_ENA_MID \
(~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
BIT(16) | BIT(17) | BIT(18)))
#define OMNIA_GPP_OUT_VAL_LOW 0x0
#define OMNIA_GPP_OUT_VAL_MID 0x0
#define OMNIA_GPP_POL_LOW 0x0
#define OMNIA_GPP_POL_MID 0x0
static struct serdes_map board_serdes_map_pex[] = {
{PEX0, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
};
static struct serdes_map board_serdes_map_sata[] = {
{SATA0, SERDES_SPEED_6_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX1, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0},
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0}
};
static struct udevice *omnia_get_i2c_chip(const char *name, uint addr,
uint offset_len)
{
struct udevice *bus, *dev;
int ret;
ret = uclass_get_device_by_name(UCLASS_I2C, OMNIA_I2C_BUS_NAME, &bus);
if (ret) {
printf("Cannot get I2C bus %s: uclass_get_device_by_name failed: %i\n",
OMNIA_I2C_BUS_NAME, ret);
return NULL;
}
ret = i2c_get_chip(bus, addr, offset_len, &dev);
if (ret) {
printf("Cannot get %s I2C chip: i2c_get_chip failed: %i\n",
name, ret);
return NULL;
}
return dev;
}
static int omnia_mcu_read(u8 cmd, void *buf, int len)
{
struct udevice *chip;
chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
OMNIA_I2C_MCU_CHIP_LEN);
if (!chip)
return -ENODEV;
return dm_i2c_read(chip, cmd, buf, len);
}
#ifndef CONFIG_SPL_BUILD
static int omnia_mcu_write(u8 cmd, const void *buf, int len)
{
struct udevice *chip;
chip = omnia_get_i2c_chip("MCU", OMNIA_I2C_MCU_CHIP_ADDR,
OMNIA_I2C_MCU_CHIP_LEN);
if (!chip)
return -ENODEV;
return dm_i2c_write(chip, cmd, buf, len);
}
static bool disable_mcu_watchdog(void)
{
int ret;
puts("Disabling MCU watchdog... ");
ret = omnia_mcu_write(CMD_WATCHDOG_STATE, "\x00", 1);
if (ret) {
printf("omnia_mcu_write failed: %i\n", ret);
return false;
}
puts("disabled\n");
return true;
}
#endif
static bool omnia_detect_sata(void)
{
int ret;
u16 stsword;
puts("MiniPCIe/mSATA card detection... ");
ret = omnia_mcu_read(CMD_GET_STATUS_WORD, &stsword, sizeof(stsword));
if (ret) {
printf("omnia_mcu_read failed: %i, defaulting to MiniPCIe card\n",
ret);
return false;
}
if (!(stsword & CARD_DET_STSBIT)) {
puts("none\n");
return false;
}
if (stsword & MSATA_IND_STSBIT)
puts("mSATA\n");
else
puts("MiniPCIe\n");
return stsword & MSATA_IND_STSBIT ? true : false;
}
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
{
if (omnia_detect_sata()) {
*serdes_map_array = board_serdes_map_sata;
*count = ARRAY_SIZE(board_serdes_map_sata);
} else {
*serdes_map_array = board_serdes_map_pex;
*count = ARRAY_SIZE(board_serdes_map_pex);
}
return 0;
}
struct omnia_eeprom {
u32 magic;
u32 ramsize;
char region[4];
u32 crc;
};
static bool omnia_read_eeprom(struct omnia_eeprom *oep)
{
struct udevice *chip;
u32 crc;
int ret;
chip = omnia_get_i2c_chip("EEPROM", OMNIA_I2C_EEPROM_CHIP_ADDR,
OMNIA_I2C_EEPROM_CHIP_LEN);
if (!chip)
return false;
ret = dm_i2c_read(chip, 0, (void *)oep, sizeof(*oep));
if (ret) {
printf("dm_i2c_read failed: %i, cannot read EEPROM\n", ret);
return false;
}
if (oep->magic != OMNIA_I2C_EEPROM_MAGIC) {
printf("bad EEPROM magic number (%08x, should be %08x)\n",
oep->magic, OMNIA_I2C_EEPROM_MAGIC);
return false;
}
crc = crc32(0, (void *)oep, sizeof(*oep) - 4);
if (crc != oep->crc) {
printf("bad EEPROM CRC (stored %08x, computed %08x)\n",
oep->crc, crc);
return false;
}
return true;
}
static int omnia_get_ram_size_gb(void)
{
static int ram_size;
struct omnia_eeprom oep;
if (!ram_size) {
/* Get the board config from EEPROM */
if (omnia_read_eeprom(&oep)) {
debug("Memory config in EEPROM: 0x%02x\n", oep.ramsize);
if (oep.ramsize == 0x2)
ram_size = 2;
else
ram_size = 1;
} else {
/* Hardcoded fallback */
puts("Memory config from EEPROM read failed!\n");
puts("Falling back to default 1 GiB!\n");
ram_size = 1;
}
}
return ram_size;
}
/*
* Define the DDR layout / topology here in the board file. This will
* be used by the DDR3 init code in the SPL U-Boot version to configure
* the DDR3 controller.
*/
static struct mv_ddr_topology_map board_topology_map_1g = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
MV_DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_NORMAL, /* temperature */
MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
NOT_COMBINED, /* ddr twin-die combined */
{ {0} }, /* raw spd data */
{0} /* timing parameters */
};
static struct mv_ddr_topology_map board_topology_map_2g = {
DEBUG_LEVEL_ERROR,
0x1, /* active interfaces */
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
{ { { {0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0},
{0x1, 0, 0, 0} },
SPEED_BIN_DDR_1600K, /* speed_bin */
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
MV_DDR_DIE_CAP_8GBIT, /* mem_size */
MV_DDR_FREQ_800, /* frequency */
0, 0, /* cas_wl cas_l */
MV_DDR_TEMP_NORMAL, /* temperature */
MV_DDR_TIM_2T} }, /* timing */
BUS_MASK_32BIT, /* Busses mask */
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
NOT_COMBINED, /* ddr twin-die combined */
{ {0} }, /* raw spd data */
{0} /* timing parameters */
};
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
{
if (omnia_get_ram_size_gb() == 2)
return &board_topology_map_2g;
else
return &board_topology_map_1g;
}
#ifndef CONFIG_SPL_BUILD
static int set_regdomain(void)
{
struct omnia_eeprom oep;
char rd[3] = {' ', ' ', 0};
if (omnia_read_eeprom(&oep))
memcpy(rd, &oep.region, 2);
else
puts("EEPROM regdomain read failed.\n");
printf("Regdomain set to %s\n", rd);
return env_set("regdomain", rd);
}
static void handle_reset_button(void)
{
const char * const vars[1] = { "bootcmd_rescue", };
int ret;
u8 reset_status;
/*
* Ensure that bootcmd_rescue has always stock value, so that running
* run bootcmd_rescue
* always works correctly.
*/
env_set_default_vars(1, (char * const *)vars, 0);
ret = omnia_mcu_read(CMD_GET_RESET, &reset_status, 1);
if (ret) {
printf("omnia_mcu_read failed: %i, reset status unknown!\n",
ret);
return;
}
env_set_ulong("omnia_reset", reset_status);
if (reset_status) {
const char * const vars[2] = {
"bootcmd",
"distro_bootcmd",
};
/*
* Set the above envs to their default values, in case the user
* managed to break them.
*/
env_set_default_vars(2, (char * const *)vars, 0);
/* Ensure bootcmd_rescue is used by distroboot */
env_set("boot_targets", "rescue");
printf("RESET button was pressed, overwriting bootcmd!\n");
} else {
/*
* In case the user somehow managed to save environment with
* boot_targets=rescue, reset boot_targets to default value.
* This could happen in subsequent commands if bootcmd_rescue
* failed.
*/
if (!strcmp(env_get("boot_targets"), "rescue")) {
const char * const vars[1] = {
"boot_targets",
};
env_set_default_vars(1, (char * const *)vars, 0);
}
}
}
#endif
int board_early_init_f(void)
{
/* Configure MPP */
writel(0x11111111, MVEBU_MPP_BASE + 0x00);
writel(0x11111111, MVEBU_MPP_BASE + 0x04);
writel(0x11244011, MVEBU_MPP_BASE + 0x08);
writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
writel(0x22200002, MVEBU_MPP_BASE + 0x10);
writel(0x30042022, MVEBU_MPP_BASE + 0x14);
writel(0x55550555, MVEBU_MPP_BASE + 0x18);
writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
/* Set GPP Out value */
writel(OMNIA_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
writel(OMNIA_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
/* Set GPP Polarity */
writel(OMNIA_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
writel(OMNIA_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
/* Set GPP Out Enable */
writel(OMNIA_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
writel(OMNIA_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
#ifndef CONFIG_SPL_BUILD
disable_mcu_watchdog();
#endif
return 0;
}
int board_late_init(void)
{
#ifndef CONFIG_SPL_BUILD
set_regdomain();
handle_reset_button();
#endif
pci_init();
return 0;
}
static struct udevice *get_atsha204a_dev(void)
{
static struct udevice *dev;
if (dev)
return dev;
if (uclass_get_device_by_name(UCLASS_MISC, "atsha204a@64", &dev)) {
puts("Cannot find ATSHA204A on I2C bus!\n");
dev = NULL;
}
return dev;
}
int checkboard(void)
{
u32 version_num, serial_num;
int err = 1;
struct udevice *dev = get_atsha204a_dev();
if (dev) {
err = atsha204a_wakeup(dev);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_VERSION,
(u8 *)&version_num);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_SERIAL,
(u8 *)&serial_num);
if (err)
goto out;
atsha204a_sleep(dev);
}
out:
printf("Turris Omnia:\n");
printf(" RAM size: %i MiB\n", omnia_get_ram_size_gb() * 1024);
if (err)
printf(" Serial Number: unknown\n");
else
printf(" Serial Number: %08X%08X\n", be32_to_cpu(version_num),
be32_to_cpu(serial_num));
return 0;
}
static void increment_mac(u8 *mac)
{
int i;
for (i = 5; i >= 3; i--) {
mac[i] += 1;
if (mac[i])
break;
}
}
int misc_init_r(void)
{
int err;
struct udevice *dev = get_atsha204a_dev();
u8 mac0[4], mac1[4], mac[6];
if (!dev)
goto out;
err = atsha204a_wakeup(dev);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_MAC0, mac0);
if (err)
goto out;
err = atsha204a_read(dev, ATSHA204A_ZONE_OTP, false,
OMNIA_ATSHA204_OTP_MAC1, mac1);
if (err)
goto out;
atsha204a_sleep(dev);
mac[0] = mac0[1];
mac[1] = mac0[2];
mac[2] = mac0[3];
mac[3] = mac1[1];
mac[4] = mac1[2];
mac[5] = mac1[3];
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("eth1addr", mac);
increment_mac(mac);
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("eth2addr", mac);
increment_mac(mac);
if (is_valid_ethaddr(mac))
eth_env_set_enetaddr("ethaddr", mac);
out:
return 0;
}
Reference in a new issue View git blame Copy permalink