u-boot/drivers
Haibo Chen 5d772196d9 mmc: fsl_esdhc_imx: optimize the timing setting
For imx usdhc/esdhc, once set the DDR_EN, enable the DDR mode, the
card clock will be divied by 2 automatically by the host. So need
to first config the DDR_EN correctly, then update the card clock.
This will make sure the actual card clock is as our expected.
IC also suggest config the DDR_EN firstly, then config the clock
divider.

For HS400/HS400ES mode, need to config the strobe dll, this need
to based on the correct target clock rate, so need to do this after
clock rate is update.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2020-12-06 15:31:37 +01:00
..
adc adc: Drop dm.h header file 2020-08-03 22:19:54 -04:00
ata ata: dwc-ahci: change trace level for phy errors managed by uclass 2020-09-08 08:46:32 -04:00
axi
bios_emulator
block xen: pvblock: Add initial support for para-virtualized block driver 2020-08-14 15:18:30 -04:00
bootcount bootcount: add a DM SPI flash backing store for bootcount 2020-11-01 15:58:47 +01:00
bus bus: uniphier-system-bus: move hardware init from board files 2020-07-11 21:30:21 +09:00
button dm: button: add a driver for button driven by gpio 2020-07-28 19:30:39 -06:00
cache
clk imx: clk: added IPG Clock for I2C on imx8qm 2020-12-06 15:07:51 +01:00
core dm: core: Fix incorrect flag check 2020-11-30 13:14:43 -07:00
cpu First set of u-boot-atmel features for 2021.01 cycle 2020-10-05 10:54:27 -04:00
crypto crypto/fsl: add RNG support 2020-07-27 14:16:29 +05:30
ddr ARM: mvebu: a38x: Fix comment typo 2020-10-22 11:26:14 -04:00
demo
dfu dfu: simplify the dependencies of DFU_TFTP 2020-11-21 07:26:16 +01:00
dma Merge tag 'ti-v2021.01-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti 2020-10-12 07:26:57 -04:00
fastboot fastboot: getvar: fix partition-size return value 2020-09-01 14:47:43 +02:00
firmware firmware: zynqmp: Swap addr_hi/low when PM_FPGA_LOAD is called 2020-10-27 08:13:31 +01:00
fpga arm: socfpga: agilex: Enable FPGA Full Reconfiguration support 2020-10-09 17:53:12 +08:00
gpio gpio: stm32: correct the bias management 2020-11-25 12:01:46 +01:00
hwspinlock
i2c i2c: ocores: add i2c driver for OpenCores I2C controller 2020-11-28 08:30:41 +01:00
input input: add support for FN1 - FN10 on crosswire kbd 2020-11-09 17:28:17 +01:00
led drivers: led: bcm6858: set the correct led polarity register 2020-11-19 09:45:49 -05:00
mailbox mailbox: zynqmp: Extend timeout for getting observation bit 2020-10-27 08:13:31 +01:00
memory memory: stm32-fmc2-ebi: add STM32 FMC2 EBI controller driver 2020-08-13 09:53:34 +02:00
misc sandbox: cros_ec: Basic support for EC_CMD_GET_NEXT_EVENT 2020-11-30 13:14:43 -07:00
mmc mmc: fsl_esdhc_imx: optimize the timing setting 2020-12-06 15:31:37 +01:00
mtd mtd: spi-nor-ids: add Winbond W25Q32JW-IM flash 2020-12-02 16:21:58 -05:00
mux drivers: mux: mmio-based syscon mux controller 2020-10-28 11:49:30 -04:00
net net: ks8851: Implement EEPROM MAC address readout 2020-11-09 14:18:09 -05:00
nvme nvme: Invalidate dcache before submitting admin cmd 2020-06-23 14:43:23 -04:00
pch
pci dm: pci: fsl: Correct the workaround of erratum A-007815 2020-10-23 16:52:09 +05:30
pci_endpoint Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq 2020-07-27 15:18:15 -04:00
phy phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off 2020-11-25 12:02:58 +01:00
pinctrl pinctrl: stmfx: update pin name 2020-11-25 12:01:53 +01:00
power sunxi: allow to use AXP20[39] attached to I2C0 on V3 series 2020-11-17 00:42:21 +00:00
pwm pwm: Add driver for Amlogic Meson PWM controller 2020-10-05 18:02:16 +02:00
qe net, qe: add DM support for QE UEC ethernet 2020-09-17 06:09:53 +02:00
ram mips: octeon: Fix Octeon DDR driver to use the correct struct 2020-11-30 18:31:56 +01:00
remoteproc remoteproc: stm32: update error management in stm32_copro_start 2020-11-25 11:32:31 +01:00
reset reset: stm32: Add support of MCU HOLD BOOT 2020-11-25 11:32:31 +01:00
rng rng: Add Qualcomm MSM PRNG driver 2020-10-22 09:54:54 -04:00
rtc Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 2020-11-06 09:46:43 -05:00
scsi
serial of-platdata and dtoc improvements 2020-10-30 15:24:30 -04:00
smem soc: qualcomm: Fix not calling dev_err with a device 2020-09-30 08:53:43 -04:00
soc soc: soc_ti_k3: Add device identification for J7200 SoC 2020-08-11 20:34:46 +05:30
sound x86: sound: Correct error handling 2020-11-06 09:51:29 +08:00
spi of-platdata and dtoc improvements 2020-10-30 15:24:30 -04:00
spmi treewide: convert devfdt_get_addr() to dev_read_addr() 2020-07-25 14:46:57 -06:00
sysinfo sysinfo: Provide a default driver to set SMBIOS values 2020-11-06 10:18:20 +08:00
sysreset patman status subcommand to collect tags from Patchwork 2020-11-06 11:27:14 -05:00
tee tee: optee: Include device_compat.h 2020-10-16 09:44:27 -04:00
thermal thermal: imx_tmu: fix missing include 2020-11-01 15:53:08 +01:00
timer board: Rename uclass to sysinfo 2020-11-06 10:18:20 +08:00
tpm tpm: spi: Cleanup source code 2020-11-20 10:42:54 +01:00
ufs ufs: Drop dm.h header file 2020-08-03 22:19:54 -04:00
usb usb: gadget: dwc2_udc_otg: return zero when reset property is not present 2020-11-22 13:18:20 +01:00
video - Clock fix MMC driver for SM1 based platforms 2020-11-16 10:50:32 -05:00
virtio virtio_blk: set log2blksz correctly 2020-08-24 14:11:31 -04:00
w1 treewide: convert devfdt_get_addr() to dev_read_addr() 2020-07-25 14:46:57 -06:00
w1-eeprom
watchdog watchdog: sbsa: timeout should be in "millisecond" 2020-12-02 16:21:58 -05:00
xen xen: Code style conformity 2020-08-24 14:11:31 -04:00
Kconfig board: Rename uclass to sysinfo 2020-11-06 10:18:20 +08:00
Makefile board: Rename uclass to sysinfo 2020-11-06 10:18:20 +08:00