mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
86b6a38863
In DFU v1.1 specification [1] the DFU_UPLOAD (Short Frame) is handled only in dfuUPLOADIDLE state: - Figure A.1 Interface state transition diagram - the state description in chapter A.2 A.2.3 State 2 dfuIDLE on Receipt of the DFU_UPLOAD request,and bitCanUpload = 1 the Next State is dfuUPLOADIDLE A.2.10 State 9 dfuUPLOAD-IDLE When the length of the data transferred by the device in response to a DFU_UPLOAD request is less than wLength. (Short frame) the Next State is dfuIDLE In current code, when an UPLOAD is completely performed after the first request (for example with wLength=200 and data read = 9), the DFU state stay at dfuUPLOADIDLE until receiving a DFU_UPLOAD or a DFU_ABORT request even it is unnecessary as the previous DFU_UPLOAD request already reached the EOF. This patch proposes to finish the DFU uploading (don't go to dfuUPLOADIDLE) and completes the control-read operation (go to DFU_STATE_dfuIDLE) when the first UPLOAD response has a short frame as an end of file (EOF) indicator even if it is not explicitly allowed in the DFU specification but this seems logical. [1] https://www.usb.org/sites/default/files/DFU_1.1.pdf Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> |
||
|---|---|---|
| .. | ||
| cdns3 | ||
| common | ||
| dwc3 | ||
| emul | ||
| eth | ||
| gadget | ||
| host | ||
| mtu3 | ||
| musb | ||
| musb-new | ||
| phy | ||
| ulpi | ||
| Kconfig | ||