mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 23:33:00 +00:00
5a5bba053d
Broadcom bnxt L2 driver support. Used by the Broadcom iproc platforms. Signed-off-by: Bharat Gooty <bharat.gooty@broadcom.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Roman Bacik <roman.bacik@broadcom.com>
876 lines
24 KiB
Text
876 lines
24 KiB
Text
source "drivers/net/phy/Kconfig"
|
|
source "drivers/net/pfe_eth/Kconfig"
|
|
source "drivers/net/fsl-mc/Kconfig"
|
|
source "drivers/net/bnxt/Kconfig"
|
|
|
|
config ETH
|
|
def_bool y
|
|
|
|
config DM_ETH
|
|
bool "Enable Driver Model for Ethernet drivers"
|
|
depends on DM
|
|
help
|
|
Enable driver model for Ethernet.
|
|
|
|
The eth_*() interface will be implemented by the UCLASS_ETH class
|
|
This is currently implemented in net/eth-uclass.c
|
|
Look in include/net.h for details.
|
|
|
|
config DM_MDIO
|
|
bool "Enable Driver Model for MDIO devices"
|
|
depends on DM_ETH && PHYLIB
|
|
help
|
|
Enable driver model for MDIO devices
|
|
|
|
Adds UCLASS_MDIO DM class supporting MDIO buses that are probed as
|
|
stand-alone devices. Useful in particular for systems that support
|
|
DM_ETH and have a stand-alone MDIO hardware block shared by multiple
|
|
Ethernet interfaces.
|
|
This is currently implemented in net/mdio-uclass.c
|
|
Look in include/miiphy.h for details.
|
|
|
|
config DM_MDIO_MUX
|
|
bool "Enable Driver Model for MDIO MUX devices"
|
|
depends on DM_MDIO
|
|
help
|
|
Enable driver model for MDIO MUX devices
|
|
|
|
Adds UCLASS_MDIO_MUX DM class supporting MDIO MUXes. Useful for
|
|
systems that support DM_MDIO and integrate one or multiple muxes on
|
|
the MDIO bus.
|
|
This is currently implemented in net/mdio-mux-uclass.c
|
|
Look in include/miiphy.h for details.
|
|
|
|
config DM_DSA
|
|
bool "Enable Driver Model for DSA switches"
|
|
depends on DM_ETH && DM_MDIO
|
|
depends on PHY_FIXED
|
|
help
|
|
Enable driver model for DSA switches
|
|
|
|
Adds UCLASS_DSA class supporting switches that follow the Distributed
|
|
Switch Architecture (DSA). These switches rely on the presence of a
|
|
management switch port connected to an Ethernet controller capable of
|
|
receiving frames from the switch. This host Ethernet controller is
|
|
called the "master" Ethernet interface in DSA terminology.
|
|
This is currently implemented in net/dsa-uclass.c, refer to
|
|
include/net/dsa.h for API details.
|
|
|
|
config MDIO_SANDBOX
|
|
depends on DM_MDIO && SANDBOX
|
|
default y
|
|
bool "Sandbox: Mocked MDIO driver"
|
|
help
|
|
This driver implements dummy read/write/reset MDIO functions mimicking
|
|
a bus with a single PHY.
|
|
|
|
This driver is used in for testing in test/dm/mdio.c
|
|
|
|
config MDIO_MUX_SANDBOX
|
|
depends on DM_MDIO_MUX && MDIO_SANDBOX
|
|
default y
|
|
bool "Sandbox: Mocked MDIO-MUX driver"
|
|
help
|
|
This driver implements dummy select/deselect ops mimicking a MUX on
|
|
the MDIO bux. It uses mdio_sandbox driver as parent MDIO.
|
|
|
|
This driver is used for testing in test/dm/mdio.c
|
|
|
|
config DM_ETH_PHY
|
|
bool "Enable Driver Model for Ethernet Generic PHY drivers"
|
|
depends on DM
|
|
help
|
|
Enable driver model for Ethernet Generic PHY .
|
|
|
|
config DSA_SANDBOX
|
|
depends on DM_DSA && SANDBOX
|
|
default y
|
|
bool "Sandbox: Mocked DSA driver"
|
|
help
|
|
This driver implements a dummy DSA switch connected to a dummy sandbox
|
|
Ethernet device used as DSA master, to test DSA class code, including
|
|
exported DSA API and datapath processing of Ethernet traffic.
|
|
|
|
menuconfig NETDEVICES
|
|
bool "Network device support"
|
|
depends on NET
|
|
default y if DM_ETH
|
|
help
|
|
You must select Y to enable any network device support
|
|
Generally if you have any networking support this is a given
|
|
|
|
If unsure, say Y
|
|
|
|
if NETDEVICES
|
|
|
|
config PHY_GIGE
|
|
bool "Enable GbE PHY status parsing and configuration"
|
|
help
|
|
Enables support for parsing the status output and for
|
|
configuring GbE PHYs (affects the inner workings of some
|
|
commands and miiphyutil.c).
|
|
|
|
config AG7XXX
|
|
bool "Atheros AG7xxx Ethernet MAC support"
|
|
depends on DM_ETH && ARCH_ATH79
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is
|
|
present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips.
|
|
|
|
|
|
config ALTERA_TSE
|
|
bool "Altera Triple-Speed Ethernet MAC support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Altera Triple-Speed (TSE) Ethernet MAC.
|
|
Please find details on the "Triple-Speed Ethernet MegaCore Function
|
|
Resource Center" of Altera.
|
|
|
|
config BCM_SF2_ETH
|
|
bool "Broadcom SF2 (Starfighter2) Ethernet support"
|
|
select PHYLIB
|
|
help
|
|
This is an abstract framework which provides a generic interface
|
|
to MAC and DMA management for multiple Broadcom SoCs such as
|
|
Cygnus, NSP and bcm28155_ap platforms.
|
|
|
|
config BCM_SF2_ETH_DEFAULT_PORT
|
|
int "Broadcom SF2 (Starfighter2) Ethernet default port number"
|
|
depends on BCM_SF2_ETH
|
|
default 0
|
|
help
|
|
Default port number for the Starfighter2 ethernet driver.
|
|
|
|
config BCM_SF2_ETH_GMAC
|
|
bool "Broadcom SF2 (Starfighter2) GMAC Ethernet support"
|
|
depends on BCM_SF2_ETH
|
|
help
|
|
This flag enables the ethernet support for Broadcom platforms with
|
|
GMAC such as Cygnus. This driver is based on the framework provided
|
|
by the BCM_SF2_ETH driver.
|
|
Say Y to any bcmcygnus based platforms.
|
|
|
|
config BCM6348_ETH
|
|
bool "BCM6348 EMAC support"
|
|
depends on DM_ETH && ARCH_BMIPS
|
|
select DMA
|
|
select DMA_CHANNELS
|
|
select MII
|
|
select PHYLIB
|
|
help
|
|
This driver supports the BCM6348 Ethernet MAC.
|
|
|
|
config BCM6368_ETH
|
|
bool "BCM6368 EMAC support"
|
|
depends on DM_ETH && ARCH_BMIPS
|
|
select DMA
|
|
select MII
|
|
help
|
|
This driver supports the BCM6368 Ethernet MAC.
|
|
|
|
config BCMGENET
|
|
bool "BCMGENET V5 support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the BCMGENET Ethernet MAC.
|
|
|
|
config CORTINA_NI_ENET
|
|
bool "Cortina-Access Ethernet driver"
|
|
depends on DM_ETH && CORTINA_PLATFORM
|
|
help
|
|
This driver supports the Cortina-Access Ethernet MAC for
|
|
all supported CAxxxx SoCs.
|
|
|
|
config CALXEDA_XGMAC
|
|
bool "Calxeda XGMAC support"
|
|
depends on DM_ETH
|
|
help
|
|
This driver supports the XGMAC in Calxeda Highbank and Midway
|
|
machines.
|
|
|
|
config DWC_ETH_QOS
|
|
bool "Synopsys DWC Ethernet QOS device support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Synopsys Designware Ethernet QOS (Quality
|
|
Of Service) IP block. The IP supports many options for bus type,
|
|
clocking/reset structure, and feature list.
|
|
|
|
config DWC_ETH_QOS_IMX
|
|
bool "Synopsys DWC Ethernet QOS device support for IMX"
|
|
depends on DWC_ETH_QOS
|
|
help
|
|
The Synopsys Designware Ethernet QOS IP block with the specific
|
|
configuration used in IMX soc.
|
|
|
|
config DWC_ETH_QOS_STM32
|
|
bool "Synopsys DWC Ethernet QOS device support for STM32"
|
|
depends on DWC_ETH_QOS
|
|
select DM_ETH_PHY
|
|
default y if ARCH_STM32MP
|
|
help
|
|
The Synopsys Designware Ethernet QOS IP block with the specific
|
|
configuration used in STM32MP soc.
|
|
|
|
config DWC_ETH_QOS_TEGRA186
|
|
bool "Synopsys DWC Ethernet QOS device support for TEGRA186"
|
|
depends on DWC_ETH_QOS
|
|
default y if TEGRA186
|
|
help
|
|
The Synopsys Designware Ethernet QOS IP block with specific
|
|
configuration used in NVIDIA's Tegra186 chip.
|
|
|
|
config E1000
|
|
bool "Intel PRO/1000 Gigabit Ethernet support"
|
|
help
|
|
This driver supports Intel(R) PRO/1000 gigabit ethernet family of
|
|
adapters. For more information on how to identify your adapter, go
|
|
to the Adapter & Driver ID Guide at:
|
|
|
|
<http://support.intel.com/support/network/adapter/pro100/21397.htm>
|
|
|
|
config E1000_SPI_GENERIC
|
|
bool "Allow access to the Intel 8257x SPI bus"
|
|
depends on E1000
|
|
help
|
|
Allow generic access to the SPI bus on the Intel 8257x, for
|
|
example with the "sspi" command.
|
|
|
|
config E1000_SPI
|
|
bool "Enable SPI bus utility code"
|
|
depends on E1000
|
|
help
|
|
Utility code for direct access to the SPI bus on Intel 8257x.
|
|
This does not do anything useful unless you set at least one
|
|
of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
|
|
|
|
config CMD_E1000
|
|
bool "Enable the e1000 command"
|
|
depends on E1000
|
|
help
|
|
This enables the 'e1000' management command for E1000 devices. When
|
|
used on devices with SPI support you can reprogram the EEPROM from
|
|
U-Boot.
|
|
|
|
config EEPRO100
|
|
bool "Intel PRO/100 82557/82559/82559ER Fast Ethernet support"
|
|
help
|
|
This driver supports Intel(R) PRO/100 82557/82559/82559ER fast
|
|
ethernet family of adapters.
|
|
|
|
config ETH_SANDBOX
|
|
depends on DM_ETH && SANDBOX
|
|
default y
|
|
bool "Sandbox: Mocked Ethernet driver"
|
|
help
|
|
This driver simply responds with fake ARP replies and ping
|
|
replies that are used to verify network stack functionality
|
|
|
|
This driver is particularly useful in the test/dm/eth.c tests
|
|
|
|
config ETH_SANDBOX_RAW
|
|
depends on DM_ETH && SANDBOX
|
|
default y
|
|
bool "Sandbox: Bridge to Linux Raw Sockets"
|
|
help
|
|
This driver is a bridge from the bottom of the network stack
|
|
in U-Boot to the RAW AF_PACKET API in Linux. This allows real
|
|
network traffic to be tested from within sandbox. See
|
|
doc/arch/index.rst for more details.
|
|
|
|
config ETH_DESIGNWARE
|
|
bool "Synopsys Designware Ethernet MAC"
|
|
select PHYLIB
|
|
imply ETH_DESIGNWARE_SOCFPGA if ARCH_SOCFPGA
|
|
help
|
|
This MAC is present in SoCs from various vendors. It supports
|
|
100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to
|
|
provide the PHY (physical media interface).
|
|
|
|
config ETH_DESIGNWARE_MESON8B
|
|
bool "Amlogic Meson8b and later glue driver for Synopsys Designware Ethernet MAC"
|
|
depends on DM_ETH
|
|
select ETH_DESIGNWARE
|
|
help
|
|
This provides glue layer to use Synopsys Designware Ethernet MAC
|
|
present on the Amlogic Meson8b, GX, AXG & G12A SoCs.
|
|
|
|
config ETH_DESIGNWARE_SOCFPGA
|
|
select REGMAP
|
|
select SYSCON
|
|
bool "Altera SoCFPGA extras for Synopsys Designware Ethernet MAC"
|
|
depends on DM_ETH && ETH_DESIGNWARE
|
|
help
|
|
The Altera SoCFPGA requires additional configuration of the
|
|
Altera system manager to correctly interface with the PHY.
|
|
This code handles those SoC specifics.
|
|
|
|
config ETH_DESIGNWARE_S700
|
|
bool "Actins S700 glue driver for Synopsys Designware Ethernet MAC"
|
|
depends on DM_ETH && ETH_DESIGNWARE
|
|
help
|
|
This provides glue layer to use Synopsys Designware Ethernet MAC
|
|
present on Actions S700 SoC.
|
|
|
|
config ETHOC
|
|
bool "OpenCores 10/100 Mbps Ethernet MAC"
|
|
help
|
|
This MAC is present in OpenRISC and Xtensa XTFPGA boards.
|
|
|
|
config FEC_MXC_SHARE_MDIO
|
|
bool "Share the MDIO bus for FEC controller"
|
|
depends on FEC_MXC
|
|
|
|
config FEC_MXC_MDIO_BASE
|
|
hex "MDIO base address for the FEC controller"
|
|
depends on FEC_MXC_SHARE_MDIO
|
|
help
|
|
This specifies the MDIO registers base address. It is used when
|
|
two FEC controllers share MDIO bus.
|
|
|
|
config FEC_MXC
|
|
bool "FEC Ethernet controller"
|
|
depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP || VF610
|
|
help
|
|
This driver supports the 10/100 Fast Ethernet controller for
|
|
NXP i.MX processors.
|
|
|
|
config FMAN_ENET
|
|
bool "Freescale FMan ethernet support"
|
|
depends on ARM || PPC
|
|
help
|
|
This driver support the Freescale FMan Ethernet controller
|
|
|
|
config SYS_FMAN_FW_ADDR
|
|
hex "FMAN Firmware Address"
|
|
depends on FMAN_ENET
|
|
default 0x0
|
|
|
|
config SYS_QE_FMAN_FW_LENGTH
|
|
hex "FMAN QE Firmware length"
|
|
depends on FMAN_ENET || QE || U_QE
|
|
default 0x10000
|
|
|
|
config FTMAC100
|
|
bool "Ftmac100 Ethernet Support"
|
|
help
|
|
This MAC is present in Andestech SoCs.
|
|
|
|
config FTGMAC100
|
|
bool "Ftgmac100 Ethernet Support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Faraday's FTGMAC100 Gigabit SoC
|
|
Ethernet controller that can be found on Aspeed SoCs (which
|
|
include NCSI).
|
|
|
|
It is fully compliant with IEEE 802.3 specification for
|
|
10/100 Mbps Ethernet and IEEE 802.3z specification for 1000
|
|
Mbps Ethernet and includes Reduced Media Independent
|
|
Interface (RMII) and Reduced Gigabit Media Independent
|
|
Interface (RGMII) interfaces. It adopts an AHB bus interface
|
|
and integrates a link list DMA engine with direct M-Bus
|
|
accesses for transmitting and receiving packets. It has
|
|
independent TX/RX fifos, supports half and full duplex (1000
|
|
Mbps mode only supports full duplex), flow control for full
|
|
duplex and backpressure for half duplex.
|
|
|
|
The FTGMAC100 also implements IP, TCP, UDP checksum offloads
|
|
and supports IEEE 802.1Q VLAN tag insertion and removal. It
|
|
offers high-priority transmit queue for QoS and CoS
|
|
applications.
|
|
|
|
|
|
config MCFFEC
|
|
bool "ColdFire Ethernet Support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the network interface units in the
|
|
ColdFire family.
|
|
|
|
config FSLDMAFEC
|
|
bool "ColdFire DMA Ethernet Support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the network interface units in the
|
|
ColdFire family.
|
|
|
|
config KS8851_MLL
|
|
bool "Microchip KS8851-MLL controller driver"
|
|
help
|
|
The Microchip KS8851 parallel bus external ethernet interface chip.
|
|
|
|
if KS8851_MLL
|
|
if !DM_ETH
|
|
config KS8851_MLL_BASEADDR
|
|
hex "Microchip KS8851-MLL Base Address"
|
|
help
|
|
Define this to hold the physical address of the device (I/O space)
|
|
endif #DM_ETH
|
|
endif #KS8851_MLL
|
|
|
|
config KSZ9477
|
|
bool "Microchip KSZ9477 I2C controller driver"
|
|
depends on DM_DSA && DM_I2C
|
|
help
|
|
This driver implements a DSA switch driver for the KSZ9477 family
|
|
of GbE switches using the I2C interface.
|
|
|
|
config MVGBE
|
|
bool "Marvell Orion5x/Kirkwood network interface support"
|
|
depends on ARCH_KIRKWOOD || ARCH_ORION5X
|
|
select PHYLIB if DM_ETH
|
|
help
|
|
This driver supports the network interface units in the
|
|
Marvell Orion5x and Kirkwood SoCs
|
|
|
|
config MVNETA
|
|
bool "Marvell Armada XP/385/3700 network interface support"
|
|
depends on ARMADA_XP || ARMADA_38X || ARMADA_3700
|
|
select PHYLIB
|
|
help
|
|
This driver supports the network interface units in the
|
|
Marvell ARMADA XP, ARMADA 38X and ARMADA 3700 SoCs
|
|
|
|
config MVPP2
|
|
bool "Marvell Armada 375/7K/8K network interface support"
|
|
depends on ARMADA_375 || ARMADA_8K
|
|
select PHYLIB
|
|
select MVMDIO
|
|
select DM_MDIO
|
|
help
|
|
This driver supports the network interface units in the
|
|
Marvell ARMADA 375, 7K and 8K SoCs.
|
|
|
|
config MACB
|
|
bool "Cadence MACB/GEM Ethernet Interface"
|
|
select PHYLIB
|
|
help
|
|
The Cadence MACB ethernet interface is found on many Atmel
|
|
AT91 and SAMA5 parts. This driver also supports the Cadence
|
|
GEM (Gigabit Ethernet MAC) found in some ARM SoC devices.
|
|
Say Y to include support for the MACB/GEM chip.
|
|
|
|
config MACB_ZYNQ
|
|
bool "Cadence MACB/GEM Ethernet Interface for Xilinx Zynq"
|
|
depends on MACB
|
|
help
|
|
The Cadence MACB ethernet interface was used on Zynq platform.
|
|
Say Y to enable support for the MACB/GEM in Zynq chip.
|
|
|
|
config MT7620_ETH
|
|
bool "MediaTek MT7620 Ethernet Interface"
|
|
depends on SOC_MT7620
|
|
select PHYLIB
|
|
select DM_RESET
|
|
select DM_GPIO
|
|
select CLK
|
|
help
|
|
The MediaTek MT7620 ethernet interface is used on MT7620 based
|
|
boards. It has a built-in switch with two configurable ports which
|
|
can connect to external PHY/MACs.
|
|
|
|
config MT7628_ETH
|
|
bool "MediaTek MT7628 Ethernet Interface"
|
|
depends on SOC_MT7628
|
|
select PHYLIB
|
|
help
|
|
The MediaTek MT7628 ethernet interface is used on MT7628 and
|
|
MT7688 based boards.
|
|
|
|
config NET_OCTEONTX
|
|
bool "OcteonTX Ethernet support"
|
|
depends on ARCH_OCTEONTX
|
|
depends on PCI_SRIOV
|
|
help
|
|
You must select Y to enable network device support for
|
|
OcteonTX SoCs. If unsure, say n
|
|
|
|
config NET_OCTEONTX2
|
|
bool "OcteonTX2 Ethernet support"
|
|
depends on ARCH_OCTEONTX2
|
|
select OCTEONTX2_CGX_INTF
|
|
help
|
|
You must select Y to enable network device support for
|
|
OcteonTX2 SoCs. If unsure, say n
|
|
|
|
config OCTEONTX_SMI
|
|
bool "OcteonTX SMI Device support"
|
|
depends on ARCH_OCTEONTX || ARCH_OCTEONTX2
|
|
help
|
|
You must select Y to enable SMI controller support for
|
|
OcteonTX or OcteonTX2 SoCs. If unsure, say n
|
|
|
|
config OCTEONTX2_CGX_INTF
|
|
bool "OcteonTX2 CGX ATF interface support"
|
|
depends on ARCH_OCTEONTX2
|
|
default y if ARCH_OCTEONTX2
|
|
help
|
|
You must select Y to enable CGX ATF interface support for
|
|
OcteonTX2 SoCs. If unsure, say n
|
|
|
|
config PCH_GBE
|
|
bool "Intel Platform Controller Hub EG20T GMAC driver"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This MAC is present in Intel Platform Controller Hub EG20T. It
|
|
supports 10/100/1000 Mbps operation.
|
|
|
|
config RGMII
|
|
bool "Enable RGMII"
|
|
help
|
|
Enable the support of the Reduced Gigabit Media-Independent
|
|
Interface (RGMII).
|
|
|
|
config MII
|
|
bool "Enable MII"
|
|
help
|
|
Enable support of the Media-Independent Interface (MII)
|
|
|
|
config PCNET
|
|
bool "AMD PCnet series Ethernet controller driver"
|
|
help
|
|
This driver supports AMD PCnet series fast ethernet family of
|
|
PCI chipsets/adapters.
|
|
|
|
source "drivers/net/qe/Kconfig"
|
|
|
|
config RTL8139
|
|
bool "Realtek 8139 series Ethernet controller driver"
|
|
help
|
|
This driver supports Realtek 8139 series fast ethernet family of
|
|
PCI chipsets/adapters.
|
|
|
|
config RTL8169
|
|
bool "Realtek 8169 series Ethernet controller driver"
|
|
help
|
|
This driver supports Realtek 8169 series gigabit ethernet family of
|
|
PCI/PCIe chipsets/adapters.
|
|
|
|
config SJA1105
|
|
bool "NXP SJA1105 Ethernet switch family driver"
|
|
depends on DM_DSA && DM_SPI
|
|
select BITREVERSE
|
|
help
|
|
This is the driver for the NXP SJA1105 automotive Ethernet switch
|
|
family. These are 5-port devices and are managed over an SPI
|
|
interface. Probing is handled based on OF bindings. The driver
|
|
supports the following revisions:
|
|
- SJA1105E (Gen. 1, No TT-Ethernet)
|
|
- SJA1105T (Gen. 1, TT-Ethernet)
|
|
- SJA1105P (Gen. 2, No SGMII, No TT-Ethernet)
|
|
- SJA1105Q (Gen. 2, No SGMII, TT-Ethernet)
|
|
- SJA1105R (Gen. 2, SGMII, No TT-Ethernet)
|
|
- SJA1105S (Gen. 2, SGMII, TT-Ethernet)
|
|
|
|
config SMC911X
|
|
bool "SMSC LAN911x and LAN921x controller driver"
|
|
|
|
if SMC911X
|
|
|
|
if !DM_ETH
|
|
config SMC911X_BASE
|
|
hex "SMC911X Base Address"
|
|
help
|
|
Define this to hold the physical address
|
|
of the device (I/O space)
|
|
endif #DM_ETH
|
|
|
|
config SMC911X_32_BIT
|
|
bool "Enable SMC911X 32-bit interface"
|
|
help
|
|
Define this if data bus is 32 bits. If your processor use a
|
|
narrower 16 bit bus or cannot convert one 32 bit word to two 16 bit
|
|
words, leave this to "n".
|
|
|
|
endif #SMC911X
|
|
|
|
config SUN7I_GMAC
|
|
bool "Enable Allwinner GMAC Ethernet support"
|
|
help
|
|
Enable the support for Sun7i GMAC Ethernet controller
|
|
|
|
config SUN7I_GMAC_FORCE_TXERR
|
|
bool "Force PA17 as gmac function"
|
|
depends on SUN7I_GMAC
|
|
help
|
|
Some ethernet phys needs TXERR control. Since the GMAC
|
|
doesn't have such signal, setting PA17 as GMAC function
|
|
makes the pin output low, which enables data transmission.
|
|
|
|
config SUN4I_EMAC
|
|
bool "Allwinner Sun4i Ethernet MAC support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Allwinner based SUN4I Ethernet MAC.
|
|
|
|
config SUN8I_EMAC
|
|
bool "Allwinner Sun8i Ethernet MAC support"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
select PHY_GIGE
|
|
help
|
|
This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC.
|
|
It can be found in H3/A64/A83T based SoCs and compatible with both
|
|
External and Internal PHYs.
|
|
|
|
config SH_ETHER
|
|
bool "Renesas SH Ethernet MAC"
|
|
select PHYLIB
|
|
help
|
|
This driver supports the Ethernet for Renesas SH and ARM SoCs.
|
|
|
|
source "drivers/net/ti/Kconfig"
|
|
|
|
config TULIP
|
|
bool "DEC Tulip DC2114x Ethernet support"
|
|
help
|
|
This driver supports DEC DC2114x Fast ethernet chips.
|
|
|
|
config XILINX_AXIEMAC
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
select MII
|
|
bool "Xilinx AXI Ethernet"
|
|
help
|
|
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
|
|
|
|
config XILINX_AXIMRMAC
|
|
depends on DM_ETH && ARCH_VERSAL
|
|
bool "Xilinx AXI MRMAC"
|
|
help
|
|
MRMAC is a high performance, low latency, adaptable Ethernet
|
|
integrated hard IP. This can be configured up to four ports with MAC
|
|
rates from 10GE to 100GE. This could be present in some of the Xilinx
|
|
Versal designs.
|
|
|
|
config XILINX_EMACLITE
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
select MII
|
|
bool "Xilinx Ethernetlite"
|
|
help
|
|
This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs.
|
|
|
|
config ZYNQ_GEM
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
bool "Xilinx Ethernet GEM"
|
|
help
|
|
This MAC is present in Xilinx Zynq and ZynqMP SoCs.
|
|
|
|
config PIC32_ETH
|
|
bool "Microchip PIC32 Ethernet Support"
|
|
depends on DM_ETH && MACH_PIC32
|
|
select PHYLIB
|
|
help
|
|
This driver implements 10/100 Mbps Ethernet and MAC layer for
|
|
Microchip PIC32 microcontrollers.
|
|
|
|
config GMAC_ROCKCHIP
|
|
bool "Rockchip Synopsys Designware Ethernet MAC"
|
|
depends on DM_ETH && ETH_DESIGNWARE
|
|
help
|
|
This driver provides Rockchip SoCs network support based on the
|
|
Synopsys Designware driver.
|
|
|
|
config RENESAS_RAVB
|
|
bool "Renesas Ethernet AVB MAC"
|
|
depends on DM_ETH && RCAR_GEN3
|
|
select PHYLIB
|
|
help
|
|
This driver implements support for the Ethernet AVB block in
|
|
Renesas M3 and H3 SoCs.
|
|
|
|
config MPC8XX_FEC
|
|
bool "Fast Ethernet Controller on MPC8XX"
|
|
depends on MPC8xx
|
|
select MII
|
|
help
|
|
This driver implements support for the Fast Ethernet Controller
|
|
on MPC8XX
|
|
|
|
config SNI_AVE
|
|
bool "Socionext AVE Ethernet support"
|
|
depends on DM_ETH && ARCH_UNIPHIER
|
|
select PHYLIB
|
|
select SYSCON
|
|
select REGMAP
|
|
help
|
|
This driver implements support for the Socionext AVE Ethernet
|
|
controller, as found on the Socionext UniPhier family.
|
|
|
|
config SNI_NETSEC
|
|
bool "Socionext NETSEC Ethernet support"
|
|
depends on DM_ETH && SYNQUACER_SPI
|
|
select PHYLIB
|
|
help
|
|
This driver implements support for the Socionext SynQuacer NETSEC
|
|
ethernet controller, as found on the Socionext SynQuacer family.
|
|
|
|
source "drivers/net/mscc_eswitch/Kconfig"
|
|
|
|
config ETHER_ON_FEC1
|
|
bool "FEC1"
|
|
depends on MPC8XX_FEC
|
|
default y
|
|
|
|
config FEC1_PHY
|
|
int "FEC1 PHY"
|
|
depends on ETHER_ON_FEC1
|
|
default -1
|
|
help
|
|
Define to the hardcoded PHY address which corresponds
|
|
to the given FEC; i. e.
|
|
#define CONFIG_FEC1_PHY 4
|
|
means that the PHY with address 4 is connected to FEC1
|
|
|
|
When set to -1, means to probe for first available.
|
|
|
|
config PHY_NORXERR
|
|
bool "PHY_NORXERR"
|
|
depends on ETHER_ON_FEC1
|
|
help
|
|
The PHY does not have a RXERR line (RMII only).
|
|
(so program the FEC to ignore it).
|
|
|
|
config ETHER_ON_FEC2
|
|
bool "FEC2"
|
|
depends on MPC8XX_FEC && MPC885
|
|
default y
|
|
|
|
config FEC2_PHY
|
|
int "FEC2 PHY"
|
|
depends on ETHER_ON_FEC2
|
|
default -1
|
|
help
|
|
Define to the hardcoded PHY address which corresponds
|
|
to the given FEC; i. e.
|
|
#define CONFIG_FEC1_PHY 4
|
|
means that the PHY with address 4 is connected to FEC1
|
|
|
|
When set to -1, means to probe for first available.
|
|
|
|
config FEC2_PHY_NORXERR
|
|
bool "PHY_NORXERR"
|
|
depends on ETHER_ON_FEC2
|
|
help
|
|
The PHY does not have a RXERR line (RMII only).
|
|
(so program the FEC to ignore it).
|
|
|
|
config SYS_DPAA_QBMAN
|
|
bool "Device tree fixup for QBMan on freescale SOCs"
|
|
depends on (ARM || PPC) && !SPL_BUILD
|
|
default y if ARCH_B4860 || \
|
|
ARCH_B4420 || \
|
|
ARCH_P1023 || \
|
|
ARCH_P2041 || \
|
|
ARCH_T1024 || \
|
|
ARCH_T1040 || \
|
|
ARCH_T1042 || \
|
|
ARCH_T2080 || \
|
|
ARCH_T4240 || \
|
|
ARCH_P4080 || \
|
|
ARCH_P3041 || \
|
|
ARCH_P5040 || \
|
|
ARCH_LS1043A || \
|
|
ARCH_LS1046A
|
|
help
|
|
QBman fixups to allow deep sleep in DPAA 1 SOCs
|
|
|
|
config TSEC_ENET
|
|
select PHYLIB
|
|
bool "Enable Three-Speed Ethernet Controller"
|
|
help
|
|
This driver implements support for the (Enhanced) Three-Speed
|
|
Ethernet Controller found on Freescale SoCs.
|
|
|
|
config MEDIATEK_ETH
|
|
bool "MediaTek Ethernet GMAC Driver"
|
|
depends on DM_ETH
|
|
select PHYLIB
|
|
select DM_GPIO
|
|
select DM_RESET
|
|
help
|
|
This Driver support MediaTek Ethernet GMAC
|
|
Say Y to enable support for the MediaTek Ethernet GMAC.
|
|
|
|
config HIGMACV300_ETH
|
|
bool "HiSilicon Gigabit Ethernet Controller"
|
|
depends on DM_ETH
|
|
select DM_RESET
|
|
select PHYLIB
|
|
help
|
|
This driver supports HIGMACV300 Ethernet controller found on
|
|
HiSilicon SoCs.
|
|
|
|
config FSL_ENETC
|
|
bool "NXP ENETC Ethernet controller"
|
|
depends on DM_ETH && DM_MDIO
|
|
help
|
|
This driver supports the NXP ENETC Ethernet controller found on some
|
|
of the NXP SoCs.
|
|
|
|
config MDIO_MUX_I2CREG
|
|
bool "MDIO MUX accessed as a register over I2C"
|
|
depends on DM_MDIO_MUX && DM_I2C
|
|
help
|
|
This driver is used for MDIO muxes driven by writing to a register of
|
|
an I2C chip. The board it was developed for uses a mux controlled by
|
|
on-board FPGA which in turn is accessed as a chip over I2C.
|
|
|
|
config MDIO_IPQ4019
|
|
bool "Qualcomm IPQ4019 MDIO interface support"
|
|
depends on DM_MDIO
|
|
help
|
|
This driver supports the MDIO interface found in Qualcomm
|
|
IPQ40xx series Soc-s.
|
|
|
|
config MVMDIO
|
|
bool "Marvell MDIO interface support"
|
|
depends on DM_MDIO
|
|
help
|
|
This driver supports the MDIO interface found in the network
|
|
interface units of the Marvell EBU SoCs (Kirkwood, Orion5x,
|
|
Dove, Armada 370, Armada XP, Armada 37xx and Armada7K/8K/8KP).
|
|
|
|
This driver is used by the MVPP2 and MVNETA drivers.
|
|
|
|
config FSL_LS_MDIO
|
|
bool "NXP Layerscape MDIO interface support"
|
|
depends on DM_MDIO
|
|
help
|
|
This driver supports the MDIO bus found on the Fman 10G Ethernet MACs and
|
|
on the mEMAC (which supports both Clauses 22 and 45).
|
|
|
|
config ASPEED_MDIO
|
|
bool "Aspeed MDIO interface support"
|
|
depends on DM_MDIO
|
|
help
|
|
This driver supports the MDIO bus of Aspeed AST2600 SOC. The driver
|
|
currently supports Clause 22.
|
|
|
|
config MDIO_MUX_MMIOREG
|
|
bool "MDIO MUX accessed as a MMIO register access"
|
|
depends on DM_MDIO_MUX
|
|
help
|
|
This driver is used for MDIO muxes driven by writing to a register in
|
|
the MMIO physical memory.
|
|
|
|
config MDIO_MUX_MESON_G12A
|
|
bool "MDIO MUX for Amlogic Meson G12A SoCs"
|
|
depends on DM_MDIO_MUX
|
|
help
|
|
This driver is used for the MDIO mux found on the Amlogic G12A & compatible
|
|
SoCs.
|
|
|
|
endif # NETDEVICES
|