u-boot/include/configs/km/keymile-common.h
Valentin Longchamp b84ac38c23 arm/km: remove CONFIG_SYS_KWD_CONFIG from keymile-common.h
This define is marvell specific, so it should be present in km_arm.
It is however not needed there either, since we set it to the default
value that is already set in include/asm/arch-kirkwood/config.h

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
cc: Heiko Schocher <hs@denx.de>
cc: Wolfgang Denk <wd@denx.de>
cc: Detlev Zundel <dzu@denx.de>
2011-05-31 19:45:02 +02:00

318 lines
9.1 KiB
C

/*
* (C) Copyright 2008-2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __CONFIG_KEYMILE_H
#define __CONFIG_KEYMILE_H
/* Do boardspecific init for all boards */
#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_LAST_STAGE_INIT
#define CONFIG_BOOTCOUNT_LIMIT
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_JFFS2
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_SETEXPR
#undef CONFIG_WATCHDOG /* disable platform specific watchdog */
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_HUSH_INIT_VAR
#define CONFIG_SYS_ALT_MEMTEST /* memory test, takes time */
#define CONFIG_SYS_HZ 1000 /* decr. freq: 1 ms ticks */
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_BOARD_DRAM_INIT /* Used board specific dram_init */
/*
* How to get access to the slot ID. Put this here to make it easy
* to modify in a centralized location. This is used in the HDLC
* driver to set the MAC.
*/
#define CONFIG_CHECK_ETHERNET_PRESENT
#define CONFIG_SYS_SLOT_ID_BASE CONFIG_SYS_KMBEC_FPGA_BASE
#define CONFIG_SYS_SLOT_ID_OFF (0x07) /* register offset */
#define CONFIG_SYS_SLOT_ID_MASK (0x3f) /* mask for slot ID bits */
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 1
#define CONFIG_SYS_I2C_INIT_BOARD
#define CONFIG_I2C_MUX
/* EEprom support */
#define CONFIG_SYS_I2C_MULTI_EEPROMS
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
/* Support the IVM EEprom */
#define CONFIG_SYS_IVM_EEPROM_ADR 0x50
#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400
#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100
#define CONFIG_SYS_FLASH_PROTECTION
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
/* UBI Support for all Keymile boards */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_CONCAT
/* common powerpc specific env settings */
#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
"bootparams=empty\0" \
"initial_boot_bank=0\0"
#endif
#ifndef CONFIG_KM_DEF_NETDEV
#define CONFIG_KM_DEF_NETDEV \
"netdev=eth0\0"
#endif
#ifndef CONFIG_KM_UBI_PARTITION_NAME
#define CONFIG_KM_UBI_PARTITION_NAME "ubi0"
#endif
#ifndef CONFIG_KM_UBI_LINUX_MTD_NAME
#define CONFIG_KM_UBI_LINUX_MTD_NAME "ubi0"
#endif
#define xstr(s) str(s)
#define str(s) #s
/*
* bootrunner
* - run all commands in 'subbootcmds'
* - on error, stop running the remaing commands
*/
#define CONFIG_KM_DEF_ENV_BOOTRUNNER \
"bootrunner=" \
"break=0; " \
"for subbootcmd in ${subbootcmds}; do " \
"if test ${break} -eq 0; then; " \
"print ${subbootcmd}; " \
"run ${subbootcmd} || break=1; " \
"fi; " \
"done\0" \
""
/*
* boottargets
* - set 'subbootcmds' for the bootrunner
* - set 'bootcmd' and 'altbootcmd'
* available targets:
* - 'release': for a standalone system kernel/rootfs from flash
*
* - 'commonargs': bootargs common to all targets
*/
#define CONFIG_KM_DEF_ENV_BOOTTARGETS \
"commonargs=" \
"addip " \
"addtty " \
"addmem " \
"addinit " \
"addvar " \
"addmtdparts " \
"addbootcount " \
"\0" \
"release=" \
"setenv actual_bank ${initial_boot_bank} && " \
"setenv subbootcmds \"" \
"checkboardid " \
"ubiattach ubicopy " \
"cramfsloadfdt cramfsloadkernel " \
"flashargs ${commonargs} " \
"addpanic boot " \
"\" && " \
"setenv bootcmd \'" \
"run actual bootrunner; reset" \
"\' && " \
"setenv altbootcmd \'" \
"run backup bootrunner; reset" \
"\' && " \
"saveenv && saveenv && " \
"reset\0" \
"debug_env=" \
"tftp 200000 " CONFIG_KM_ARCH_DBG_FILE " && " \
"env import -t 200000 ${filesize} && " \
"run debug_env_common\0" \
""
/*
* bootargs
* - modify 'bootargs'
*
* - 'addip': add ip configuration
* - 'addmem': limit kernel memory mem=
* - 'addpanic': add kernel panic options
* - 'addtty': add console=...
* - 'addvar': add phram device for /var
* - 'flashargs': defaults arguments for flash base boot
*
* processor specific settings
* - 'addbootcount': add boot counter
* - 'addmtdparts': add mtd partition information
*/
#define CONFIG_KM_DEF_ENV_BOOTARGS \
"addinit=" \
"setenv bootargs ${bootargs} init=${init}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off\0" \
"addmem=" \
"setenv bootargs ${bootargs} mem=${pnvramaddr}\0" \
"addpanic=" \
"setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \
"addtty=" \
"setenv bootargs ${bootargs}" \
" console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}\0" \
"addvar=" \
"setenv bootargs ${bootargs} phram.phram=phvar," \
"${varaddr}," xstr(CONFIG_KM_PHRAM) "\0" \
"flashargs=" \
"setenv bootargs " \
"ubi.mtd=" CONFIG_KM_UBI_LINUX_MTD_NAME " " \
"root=mtdblock:rootfs${boot_bank} " \
"rootfstype=squashfs ro\0" \
""
/*
* flash_boot
* - commands for booting from flash
*
* - 'cramfsloadkernel': copy kernel from a cramfs to ram
* - 'ubiattach': attach ubi partition
* - 'ubicopy': copy ubi volume to ram
* - volume names: bootfs0, bootfs1, bootfs2, ...
*
* processor specific settings
* - 'cramfsloadfdt': copy fdt from a cramfs to ram
*/
#define CONFIG_KM_DEF_ENV_FLASH_BOOT \
"cramfsaddr=" xstr(CONFIG_KM_CRAMFS_ADDR) "\0" \
"cramfsloadkernel=" \
"cramfsload ${kernel_addr_r} uImage && " \
"setenv actual_kernel_addr ${kernel_addr_r}\0" \
"ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME "\0" \
"ubicopy=ubi read "xstr(CONFIG_KM_CRAMFS_ADDR) \
" bootfs${boot_bank}\0" \
""
/*
* constants
* - KM specific constants and commands
*
* - 'default': setup default environment
*/
#define CONFIG_KM_DEF_ENV_CONSTANTS \
"actual=setenv boot_bank ${actual_bank}\0" \
"backup=setenv boot_bank ${backup_bank}\0" \
"actual_bank=${initial_boot_bank}\0" \
"backup_bank=0\0" \
"default=" \
"setenv default 'run newenv; reset' && " \
"run release && saveenv; reset\0" \
"checkboardid=km_checkbidhwk\0" \
"pnvramsize=" xstr(CONFIG_KM_PNVRAM) "\0" \
""
#ifndef CONFIG_KM_DEF_ENV
#define CONFIG_KM_DEF_ENV \
CONFIG_KM_DEF_ENV_BOOTPARAMS \
CONFIG_KM_DEF_NETDEV \
CONFIG_KM_DEF_ENV_CPU \
CONFIG_KM_DEF_ENV_BOOTRUNNER \
CONFIG_KM_DEF_ENV_BOOTTARGETS \
CONFIG_KM_DEF_ENV_BOOTARGS \
CONFIG_KM_DEF_ENV_FLASH_BOOT \
CONFIG_KM_DEF_ENV_CONSTANTS \
"altbootcmd=run bootcmd\0" \
"bootcmd=run default\0" \
"bootlimit=2\0" \
"init=/sbin/init-overlay.sh\0" \
"kernel_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
"load=tftpboot ${u-boot_addr_r} ${u-boot}\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"stderr=serial\0" \
"stdin=serial\0" \
"stdout=serial\0" \
"u-boot="xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"u-boot_addr_r="xstr(CONFIG_KM_KERNEL_ADDR) "\0" \
""
#endif /* CONFIG_KM_DEF_ENV */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#endif /* __CONFIG_KEYMILE_H */