u-boot/arch/arm/dts/imx8mn-u-boot.dtsi
Adam Ford 93c4c0e4dd arm: dts: imx8mn-u-boot: Create common imx8mn-u-boot.dtsi
Multiple boards create duplicate entries in their respective
-u-boot.dtsi files which all basically do the same thing.
To consolidate these and make it easier to make improvements
going forward, consolidate them all into one place.

This file creates a flash.bin image using binman, and supports
LPDDR4, DDR4 and DDR3.  Since individual boards use different
peripherals and different UART ports, those entries were kept
in their respective board files, but the spba1 node was addded
which contains all UART1-3 to help facilitate SPL_DM_SERIAL.
Individual users will still need to include their respective
UART and pinctrl nodes for those UARTS.

This consolidated file also supports generating a flash.bin file
which can boot from flexSPI if CONFIG_FSPI_CONF_HEADER is
enabled.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-10-24 13:43:20 +02:00

248 lines
3.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2022 Logic PD, Inc dba Beacon EmbeddedWorks
*/
/ {
binman: binman {
multiple-images;
};
firmware {
optee {
compatible = "linaro,optee-tz";
method = "smc";
};
};
wdt-reboot {
compatible = "wdt-reboot";
wdt = <&wdog1>;
u-boot,dm-spl;
};
};
&{/soc@0} {
u-boot,dm-pre-reloc;
u-boot,dm-spl;
};
&aips1 {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&aips2 {
u-boot,dm-spl;
};
&aips3 {
u-boot,dm-spl;
};
&aips4 {
u-boot,dm-spl;
};
&clk {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
/delete-property/ assigned-clocks;
/delete-property/ assigned-clock-parents;
/delete-property/ assigned-clock-rates;
};
&iomuxc {
u-boot,dm-spl;
};
&osc_24m {
u-boot,dm-spl;
u-boot,dm-pre-reloc;
};
&spba1 {
u-boot,dm-spl;
};
&wdog1 {
u-boot,dm-spl;
};
&binman {
u-boot-spl-ddr {
filename = "u-boot-spl-ddr.bin";
pad-byte = <0xff>;
align-size = <4>;
align = <4>;
u-boot-spl {
align-end = <4>;
filename = "u-boot-spl.bin";
};
ddr-1d-imem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
filename = "lpddr4_pmu_train_1d_imem.bin";
#elif CONFIG_IMX8M_DDR4
filename = "ddr4_imem_1d.bin";
#else
filename = "ddr3_imem_1d.bin";
#endif
type = "blob-ext";
align-end = <4>;
};
ddr-1d-dmem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
filename = "lpddr4_pmu_train_1d_dmem.bin";
#elif CONFIG_IMX8M_DDR4
filename = "ddr4_dmem_1d.bin";
#else
filename = "ddr3_dmem_1d.bin";
#endif
type = "blob-ext";
align-end = <4>;
};
ddr-2d-imem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
filename = "lpddr4_pmu_train_2d_imem.bin";
#elif CONFIG_IMX8M_DDR4
filename = "ddr4_imem_2d.bin";
#endif
type = "blob-ext";
align-end = <4>;
};
ddr-2d-dmem-fw {
#ifdef CONFIG_IMX8M_LPDDR4
filename = "lpddr4_pmu_train_2d_dmem.bin";
#elif CONFIG_IMX8M_DDR4
filename = "ddr4_dmem_2d.bin";
#endif
type = "blob-ext";
align-end = <4>;
};
};
spl {
filename = "spl.bin";
mkimage {
args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x912000";
blob {
filename = "u-boot-spl-ddr.bin";
};
};
};
itb {
filename = "u-boot.itb";
fit {
description = "Configuration to load ATF before U-Boot";
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
fit,fdt-list = "of-list";
#address-cells = <1>;
images {
uboot {
arch = "arm64";
compression = "none";
description = "U-Boot (64-bit)";
load = <CONFIG_SYS_TEXT_BASE>;
type = "standalone";
uboot-blob {
filename = "u-boot-nodtb.bin";
type = "blob-ext";
};
};
atf {
arch = "arm64";
compression = "none";
description = "ARM Trusted Firmware";
entry = <0x960000>;
load = <0x960000>;
type = "firmware";
atf-blob {
filename = "bl31.bin";
type = "atf-bl31";
};
};
binman_fip: fip {
arch = "arm64";
compression = "none";
description = "Trusted Firmware FIP";
load = <0x40310000>;
type = "firmware";
};
@fdt-SEQ {
compression = "none";
description = "NAME";
type = "flat_dt";
uboot-fdt-blob {
filename = "u-boot.dtb";
type = "blob-ext";
};
};
};
configurations {
default = "@config-DEFAULT-SEQ";
binman_configuration: @config-SEQ {
description = "NAME";
fdt = "fdt-SEQ";
firmware = "uboot";
loadables = "atf";
};
};
};
};
imx-boot {
filename = "flash.bin";
pad-byte = <0x00>;
#ifdef CONFIG_FSPI_CONF_HEADER
fspi_conf_block {
filename = CONFIG_FSPI_CONF_FILE;
type = "blob-ext";
offset = <0x400>;
};
spl {
filename = "spl.bin";
offset = <0x1000>;
type = "blob-ext";
};
binman_uboot: uboot {
filename = "u-boot.itb";
offset = <0x59000>;
type = "blob-ext";
};
#else
spl {
offset = <0x0>;
filename = "spl.bin";
type = "blob-ext";
};
binman_uboot: uboot {
offset = <0x58000>;
filename = "u-boot.itb";
type = "blob-ext";
};
#endif
};
};