mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 18:28:55 +00:00
c2120fbfbc
The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
405 lines
11 KiB
C
405 lines
11 KiB
C
/*
|
|
* (C) Copyright 2008-2009
|
|
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
|
|
* Jens Scharsig <esw@bus-elektronik.de>
|
|
*
|
|
* Configuation settings for the EB+CPUx9K2 board.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_EB_CPUx9K2_H_
|
|
#define _CONFIG_EB_CPUx9K2_H_
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */
|
|
#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */
|
|
#define USE_920T_MMU
|
|
|
|
#define CONFIG_VERSION_VARIABLE
|
|
#define CONFIG_IDENT_STRING " on EB+CPUx9K2"
|
|
|
|
#include <asm/hardware.h> /* needed for port definitions */
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
|
|
#define MACH_TYPE_EB_CPUX9K2 1977
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
#define CONFIG_SYS_DCACHE_OFF
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
#ifndef CONFIG_RAMBOOT
|
|
#define CONFIG_SYS_TEXT_BASE 0x00000000
|
|
#else
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_SYS_TEXT_BASE 0x21f00000
|
|
#endif
|
|
#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
|
|
|
|
#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
|
|
#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
|
|
|
|
#define CONFIG_BOOT_RETRY_TIME 30
|
|
#define CONFIG_CMDLINE_EDITING
|
|
|
|
#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_SYS_PBSIZE \
|
|
(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
|
|
/*
|
|
* ARM asynchronous clock
|
|
*/
|
|
|
|
#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */
|
|
#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3)
|
|
#define CONFIG_SYS_HZ 1000
|
|
#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2)
|
|
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
|
|
/* flash */
|
|
#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
|
|
#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
|
|
|
|
/* clocks */
|
|
#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */
|
|
#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */
|
|
#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 520*1024)
|
|
|
|
/*
|
|
* sdram
|
|
*/
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
|
|
#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
|
|
CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \
|
|
CONFIG_SYS_MALLOC_LEN)
|
|
|
|
#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */
|
|
#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
|
|
#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
|
|
#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */
|
|
#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */
|
|
#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */
|
|
#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */
|
|
#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
|
|
#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
|
|
#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
|
|
#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
|
|
#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
|
|
|
|
/*
|
|
* Command line configuration
|
|
*/
|
|
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BMP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_I2C_CMD_NO_FLAT
|
|
#define CONFIG_I2C_CMD_TREE
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_SYS_LONGHELP
|
|
|
|
/*
|
|
* Filesystems
|
|
*/
|
|
|
|
#define CONFIG_JFFS2_NAND 1
|
|
|
|
#ifndef CONFIG_JFFS2_CMDLINE
|
|
#define CONFIG_JFFS2_DEV "nand0"
|
|
#define CONFIG_JFFS2_PART_OFFSET 0
|
|
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
|
|
#else
|
|
#define MTDIDS_DEFAULT "nor0=0,nand0=1"
|
|
#define MTDPARTS_DEFAULT "mtdparts=" \
|
|
"0:" \
|
|
"384k(U-Boot)," \
|
|
"128k(Env)," \
|
|
"128k(Splash)," \
|
|
"4M(Kernel)," \
|
|
"-(FS)" \
|
|
";" \
|
|
"1:" \
|
|
"-(jffs2)"
|
|
#endif /* CONFIG_JFFS2_CMDLINE */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_AT91C_PQFP_UHPBUG
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200"
|
|
|
|
/*
|
|
* UART/CONSOLE
|
|
*/
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID 0/* ignored in arm */
|
|
|
|
/*
|
|
* network
|
|
*/
|
|
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_RESET_PHY_R 1
|
|
|
|
#define CONFIG_DRIVER_AT91EMAC 1
|
|
#define CONFIG_DRIVER_AT91EMAC_QUIET 1
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8
|
|
#define CONFIG_MII 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* I2C-Bus
|
|
*/
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
|
|
|
|
/* Software I2C driver configuration */
|
|
|
|
#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */
|
|
#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */
|
|
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
|
|
#define I2C_INIT i2c_init_board();
|
|
#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr);
|
|
#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder);
|
|
#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0)
|
|
#define I2C_SDA(bit) \
|
|
if (bit) \
|
|
writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \
|
|
else \
|
|
writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr);
|
|
#define I2C_SCL(bit) \
|
|
if (bit) \
|
|
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \
|
|
else \
|
|
writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr);
|
|
|
|
#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED)
|
|
|
|
/* I2C-RTC */
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1338
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/* EEPROM */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
|
|
/* FLASH organization */
|
|
|
|
/* NOR-FLASH */
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
|
|
#define PHYS_FLASH_1 0x10000000
|
|
#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 6000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 2000
|
|
|
|
/* NAND */
|
|
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_DBW_8 1
|
|
|
|
/* Status LED's */
|
|
|
|
#define CONFIG_STATUS_LED 1
|
|
#define CONFIG_BOARD_SPECIFIC_LED 1
|
|
|
|
#define STATUS_LED_BOOT 1
|
|
#define STATUS_LED_ACTIVE 0
|
|
|
|
#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */
|
|
#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */
|
|
#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */
|
|
#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4)
|
|
|
|
#define CONFIG_VIDEO 1
|
|
|
|
/* Options */
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
|
|
#define CONFIG_VIDEO_VCXK 1
|
|
|
|
#define CONFIG_SPLASH_SCREEN 1
|
|
|
|
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4
|
|
#define CONFIG_SYS_VCXK_BASE 0x30000000
|
|
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3)
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr
|
|
|
|
#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5)
|
|
#define CONFIG_SYS_VCXK_ENABLE_PORT piob
|
|
#define CONFIG_SYS_VCXK_ENABLE_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2)
|
|
#define CONFIG_SYS_VCXK_REQUEST_PORT piob
|
|
#define CONFIG_SYS_VCXK_REQUEST_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4)
|
|
#define CONFIG_SYS_VCXK_INVERT_PORT piob
|
|
#define CONFIG_SYS_VCXK_INVERT_DDR oer
|
|
|
|
#define CONFIG_SYS_VCXK_RESET_PIN (1<<6)
|
|
#define CONFIG_SYS_VCXK_RESET_PORT piob
|
|
#define CONFIG_SYS_VCXK_RESET_DDR oer
|
|
|
|
#endif /* CONFIG_VIDEO */
|
|
|
|
/* Environment */
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000)
|
|
#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_BOOTCOMMAND "run nfsboot"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) boot=nfs " \
|
|
";echo $(bootargs)" \
|
|
";bootm"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"displaywidth=256\0" \
|
|
"displayheight=512\0" \
|
|
"displaybsteps=1023\0" \
|
|
"ubootaddr=10000000\0" \
|
|
"splashimage=10080000\0" \
|
|
"kerneladdr=100A0000\0" \
|
|
"kernelsize=00400000\0" \
|
|
"rootfsaddr=104A0000\0" \
|
|
"copy_addr=21200000\0" \
|
|
"rootfssize=00B60000\0" \
|
|
"bootargsdefaults=set bootargs " \
|
|
"console=ttyS0,115200 " \
|
|
"video=vcxk_fb:xres:${displaywidth}," \
|
|
"yres:${displayheight}," \
|
|
"bres:${displaybsteps} " \
|
|
"mem=62M " \
|
|
"panic=10 " \
|
|
"uboot=\\\"${ver}\\\" " \
|
|
"\0" \
|
|
"update_kernel=protect off $(kerneladdr) +$(kernelsize);" \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"erase $(kerneladdr) +$(kernelsize);" \
|
|
"cp.b $(fileaddr) $(kerneladdr) $(filesize);" \
|
|
"protect on $(kerneladdr) +$(kernelsize)" \
|
|
"\0" \
|
|
"update_root=protect off $(rootfsaddr) +$(rootfssize);" \
|
|
"dhcp $(copy_addr) rfs;" \
|
|
"erase $(rootfsaddr) +$(rootfssize);" \
|
|
"cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \
|
|
"\0" \
|
|
"update_uboot=protect off 10000000 1005FFFF;" \
|
|
"dhcp $(copy_addr) u-boot_eb_cpux9k2;" \
|
|
"erase 10000000 1005FFFF;" \
|
|
"cp.b $(fileaddr) $(ubootaddr) $(filesize);" \
|
|
"protect on 10000000 1005FFFF;reset\0" \
|
|
"update_splash=protect off $(splashimage) +20000;" \
|
|
"dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \
|
|
"erase $(splashimage) +20000;" \
|
|
"cp.b $(fileaddr) 10080000 $(filesize);" \
|
|
"protect on $(splashimage) +20000;reset\0" \
|
|
"emergency=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"netemergency=run bootargsdefaults;" \
|
|
"dhcp $(copy_addr) uImage_cpux9k2;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=emergency " \
|
|
";bootm $(copy_addr)\0" \
|
|
"norboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=local " \
|
|
";bootm $(kerneladdr)\0" \
|
|
"nandboot=run bootargsdefaults;" \
|
|
"set bootargs $(bootargs) root=initramfs boot=nand " \
|
|
";bootm $(kerneladdr)\0" \
|
|
" "
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
#endif
|
|
|
|
/* EOF */
|