u-boot/arch/arm/dts/meson-gxl-s905w-jethome-jethub-j80.dts
Vyacheslav Bocharov de19baef68 ARM: amlogic: add JetHub D1/H1 device support
Add support for new home automation devices.

JetHome Jethub D1 (http://jethome.ru/jethub-d1) is a home automation controller with the following features:
- DIN Rail Mounting case
- Amlogic A113X (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 512Mb/1GB DDR3
- 8/16GB eMMC flash
- 1 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth AMPAK AP6255 (Broadcom BCM43455) IEEE 802.11a/b/g/n/ac, Bluetooth 4.2.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- 2 x gpio LEDS
- GPIO user Button
- 1 x 1-Wire
- 2 x RS-485
- 4 x dry contact digital GPIO inputs
- 3 x relay GPIO outputs
- DC source with a voltage of 9 to 56 V / Passive POE

JetHome Jethub H1 (http://jethome.ru/jethub-h1) is a home automation controller with the following features:
- Square plastic case
- Amlogic S905W (ARM Cortex-A53) quad-core up to 1.5GHz
- no video out
- 1GB DDR3
- 8/16GB eMMC flash
- 2 x USB 2.0
- 1 x 10/100Mbps ethernet
- WiFi / Bluetooth RTL8822CS IEEE 802.11a/b/g/n/ac, Bluetooth 5.0.
- TI CC2538 + CC2592 Zigbee Wireless Module with up to 20dBm output power and Zigbee 3.0 support.
- MicroSD 2.x/3.x/4.x DS/HS cards.
- 1 x gpio LED
- ADC user Button
- DC source 5V microUSB with serial console

Patches from:
- JetHub H1
  https://lore.kernel.org/r/20210915085715.1134940-4-adeep@lexina.in
  https://git.kernel.org/amlogic/c/abfaae24ecf3e7f00508b60fa05e2b6789b8f607
- JetHub D1
  https://lore.kernel.org/r/20210915085715.1134940-5-adeep@lexina.in
  https://git.kernel.org/amlogic/c/8e279fb2903990cc6296ec56b3b80b2f854b6c79

Signed-off-by: Vyacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
[narmstrong: removed unused variable value]
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2021-10-07 13:45:35 +02:00

241 lines
4.5 KiB
Text

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
* Copyright (c) 2020 JetHome
* Author: Aleksandr Kazantsev <ak@tvip.ru>
* Author: Alexey Shevelkin <ash@tvip.ru>
* Author: Vyacheslav Bocharov <adeep@lexina.in>
*/
/dts-v1/;
#include "meson-gxl.dtsi"
/ {
compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
model = "JetHome JetHub J80";
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
reserved-memory {
linux,cma {
size = <0x0 0x1000000>;
};
};
aliases {
serial0 = &uart_AO; /* Console */
serial1 = &uart_A; /* Bluetooth */
serial2 = &uart_AO_B; /* Wireless module 1 */
serial3 = &uart_C; /* Wireless module 2 */
ethernet0 = &ethmac;
};
chosen {
stdout-path = "serial0:115200n8";
};
vddio_ao18: regulator-vddio_ao18 {
compatible = "regulator-fixed";
regulator-name = "VDDIO_AO18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddio_boot: regulator-vddio_boot {
compatible = "regulator-fixed";
regulator-name = "VDDIO_BOOT";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
};
&efuse {
bt_mac: bt_mac@6 {
reg = <0x6 0x6>;
};
wifi_mac: wifi_mac@C {
reg = <0xc 0x6>;
};
};
&sn {
reg = <0x32 0x20>;
};
&eth_mac {
reg = <0x0 0x6>;
};
&bid {
reg = <0x12 0x20>;
};
&usb {
status = "okay";
dr_mode = "host";
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&clkc CLKID_FCLK_DIV4>;
clock-names = "clkin0";
};
&saradc {
status = "okay";
vref-supply = <&vddio_ao18>;
};
/* Wireless SDIO Module */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <50000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_pins>;
pinctrl-1 = <&sdcard_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&vddio_boot>;
};
/* Console UART */
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
/* S905W only has access to its internal PHY */
&ethmac {
status = "okay";
phy-mode = "rmii";
phy-handle = <&internal_phy>;
};
&internal_phy {
status = "okay";
pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
pinctrl-names = "default";
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
};
&uart_C {
status = "okay";
pinctrl-0 = <&uart_c_pins>;
pinctrl-names = "default";
};
&uart_AO_B {
status = "okay";
pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
};
&i2c_B {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c_b_pins>;
pcf8563: pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
status = "okay";
};
};