mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
4d573d5c98
Add support for DH electronics i.MX8M Plus DHCOM SoM on PDK2 carrier board. Currently supported are serial console, EQoS and FEC ethernets, eMMC, SD, SPI NOR and USB 3.0 host. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@denx.de> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
1042 lines
25 KiB
Text
1042 lines
25 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2021-2022 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include "imx8mp.dtsi"
|
|
|
|
/ {
|
|
model = "DH electronics i.MX8M Plus DHCOM SoM";
|
|
compatible = "dh,imx8mp-dhcom-som", "fsl,imx8mp";
|
|
|
|
aliases {
|
|
ethernet0 = &eqos;
|
|
ethernet1 = &fec;
|
|
rtc0 = &rv3032;
|
|
rtc1 = &snvs_rtc;
|
|
spi0 = &flexspi;
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
/* Memory size 512 MiB..8 GiB will be filled by U-Boot */
|
|
reg = <0x0 0x40000000 0 0x08000000>;
|
|
};
|
|
|
|
reg_eth_vio: regulator-eth-vio {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
|
|
pinctrl-0 = <&pinctrl_enet_vio>;
|
|
pinctrl-names = "default";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-name = "eth_vio";
|
|
vin-supply = <&buck4>;
|
|
};
|
|
|
|
reg_usdhc2_vmmc: regulator-usdhc2-vmmc {
|
|
compatible = "regulator-fixed";
|
|
enable-active-high;
|
|
gpio = <&gpio2 19 0>; /* SD2_RESET */
|
|
off-on-delay-us = <12000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usdhc2_vmmc>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-name = "VDD_3V3_SD";
|
|
startup-delay-us = <100>;
|
|
vin-supply = <&buck4>;
|
|
};
|
|
};
|
|
|
|
&A53_0 {
|
|
cpu-supply = <&buck2>;
|
|
};
|
|
|
|
&A53_1 {
|
|
cpu-supply = <&buck2>;
|
|
};
|
|
|
|
&A53_2 {
|
|
cpu-supply = <&buck2>;
|
|
};
|
|
|
|
&A53_3 {
|
|
cpu-supply = <&buck2>;
|
|
};
|
|
|
|
&ecspi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&ecspi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_ecspi2>;
|
|
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&eqos { /* First ethernet */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_eqos>;
|
|
phy-handle = <ðphy0g>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
|
|
mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Up to one of these two PHYs may be populated. */
|
|
ethphy0f: ethernet-phy@1 { /* SMSC LAN8740Ai */
|
|
compatible = "ethernet-phy-id0007.c110",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&pinctrl_ethphy0>;
|
|
pinctrl-names = "default";
|
|
reg = <1>;
|
|
reset-assert-us = <1000>;
|
|
reset-deassert-us = <1000>;
|
|
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
/* Non-default PHY population option. */
|
|
status = "disabled";
|
|
};
|
|
|
|
ethphy0g: ethernet-phy@5 { /* Micrel KSZ9131RNXI */
|
|
compatible = "ethernet-phy-id0022.1642",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
interrupt-parent = <&gpio3>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
|
|
micrel,led-mode = <0>;
|
|
pinctrl-0 = <&pinctrl_ethphy0>;
|
|
pinctrl-names = "default";
|
|
reg = <5>;
|
|
reset-assert-us = <1000>;
|
|
reset-deassert-us = <1000>;
|
|
reset-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
|
|
/* Default PHY population option. */
|
|
status = "okay";
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec { /* Second ethernet */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec>;
|
|
phy-handle = <ðphy1f>;
|
|
phy-mode = "rgmii";
|
|
fsl,magic-packet;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Up to one PHY may be populated. */
|
|
ethphy1f: ethernet-phy@1 { /* SMSC LAN8740Ai */
|
|
compatible = "ethernet-phy-id0007.c110",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
interrupt-parent = <&gpio4>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-0 = <&pinctrl_ethphy1>;
|
|
pinctrl-names = "default";
|
|
reg = <1>;
|
|
reset-assert-us = <1000>;
|
|
reset-deassert-us = <1000>;
|
|
reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
/* Non-default PHY population option. */
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&flexcan1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&flexcan2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&flexspi {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flexspi>;
|
|
status = "okay";
|
|
|
|
flash@0 { /* W25Q128JWPIM */
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <80000000>;
|
|
spi-tx-bus-width = <4>;
|
|
spi-rx-bus-width = <4>;
|
|
};
|
|
};
|
|
|
|
&gpio1 {
|
|
gpio-line-names =
|
|
"DHCOM-G", "", "", "", "", "DHCOM-I", "DHCOM-J", "DHCOM-L",
|
|
"DHCOM-B", "DHCOM-A", "", "DHCOM-H", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio2 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "DHCOM-K", "", "", "", "",
|
|
"", "", "", "", "DHCOM-INT", "", "", "",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio3 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "SOM-HW0", "",
|
|
"", "", "", "", "", "", "SOM-MEM0", "SOM-MEM1",
|
|
"SOM-MEM2", "SOM-HW2", "", "", "", "", "", "";
|
|
};
|
|
|
|
&gpio4 {
|
|
gpio-line-names =
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "SOM-HW1", "", "", "", "",
|
|
"", "", "", "DHCOM-D", "", "", "", "";
|
|
};
|
|
|
|
&gpio5 {
|
|
gpio-line-names =
|
|
"", "", "DHCOM-C", "", "", "", "", "",
|
|
"", "", "", "", "", "", "", "",
|
|
"", "", "", "", "", "", "DHCOM-E", "DHCOM-F",
|
|
"", "", "", "", "", "", "", "";
|
|
};
|
|
|
|
&i2c3 {
|
|
/*
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
*/
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
pinctrl-1 = <&pinctrl_i2c3_gpio>;
|
|
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
|
|
pmic: pmic@25 {
|
|
compatible = "nxp,pca9450c";
|
|
reg = <0x25>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pmic>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
sd-vsel-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
/*
|
|
* i.MX 8M Plus Data Sheet for Consumer Products
|
|
* 3.1.4 Operating ranges
|
|
* MIMX8ML8CVNKZAB
|
|
*/
|
|
regulators {
|
|
buck1: BUCK1 { /* VDD_SOC (dual-phase with BUCK3) */
|
|
regulator-compatible = "BUCK1";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-ramp-delay = <3125>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck2: BUCK2 { /* VDD_ARM */
|
|
regulator-compatible = "BUCK2";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-ramp-delay = <3125>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck4: BUCK4 { /* VDD_3V3 */
|
|
regulator-compatible = "BUCK4";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck5: BUCK5 { /* VDD_1V8 */
|
|
regulator-compatible = "BUCK5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
buck6: BUCK6 { /* NVCC_DRAM_1V1 */
|
|
regulator-compatible = "BUCK6";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo1: LDO1 { /* NVCC_SNVS_1V8 */
|
|
regulator-compatible = "LDO1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo3: LDO3 { /* VDDA_1V8 */
|
|
regulator-compatible = "LDO3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4: LDO4 { /* PMIC_LDO4 */
|
|
regulator-compatible = "LDO4";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
ldo5: LDO5 { /* NVCC_SD2 */
|
|
regulator-compatible = "LDO5";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
adc@48 {
|
|
compatible = "ti,tla2024";
|
|
reg = <0x48>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
channel@0 { /* Voltage over AIN0 and AIN1. */
|
|
reg = <0>;
|
|
};
|
|
|
|
channel@1 { /* Voltage over AIN0 and AIN3. */
|
|
reg = <1>;
|
|
};
|
|
|
|
channel@2 { /* Voltage over AIN1 and AIN3. */
|
|
reg = <2>;
|
|
};
|
|
|
|
channel@3 { /* Voltage over AIN2 and AIN3. */
|
|
reg = <3>;
|
|
};
|
|
|
|
channel@4 { /* Voltage over AIN0 and GND. */
|
|
reg = <4>;
|
|
};
|
|
|
|
channel@5 { /* Voltage over AIN1 and GND. */
|
|
reg = <5>;
|
|
};
|
|
|
|
channel@6 { /* Voltage over AIN2 and GND. */
|
|
reg = <6>;
|
|
};
|
|
|
|
channel@7 { /* Voltage over AIN3 and GND. */
|
|
reg = <7>;
|
|
};
|
|
};
|
|
|
|
touchscreen@49 {
|
|
compatible = "ti,tsc2004";
|
|
reg = <0x49>;
|
|
interrupts-extended = <&gpio4 0 IRQ_TYPE_EDGE_FALLING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_touch>;
|
|
vio-supply = <&buck4>;
|
|
};
|
|
|
|
eeprom0: eeprom@50 { /* EEPROM with EQoS MAC address */
|
|
compatible = "atmel,24c02";
|
|
pagesize = <16>;
|
|
reg = <0x50>;
|
|
};
|
|
|
|
rv3032: rtc@51 {
|
|
compatible = "microcrystal,rv3032";
|
|
reg = <0x51>;
|
|
interrupts-extended = <&gpio5 5 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rtc>;
|
|
};
|
|
|
|
eeprom1: eeprom@53 { /* EEPROM with FEC MAC address */
|
|
compatible = "atmel,24c02";
|
|
pagesize = <16>;
|
|
reg = <0x53>;
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
/*
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
*/
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c4>;
|
|
pinctrl-1 = <&pinctrl_i2c4_gpio>;
|
|
scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 { /* HDMI EDID bus */
|
|
/*
|
|
* iMX8MP 1P33A Errata ERR007805
|
|
* I2C is limited to 384 kHz due to SoC bug.
|
|
*/
|
|
clock-frequency = <100000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c5>;
|
|
pinctrl-1 = <&pinctrl_i2c5_gpio>;
|
|
scl-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
sda-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm1 {
|
|
pinctrl-0 = <&pinctrl_pwm1>;
|
|
pinctrl-names = "default";
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart1 {
|
|
/* CA53 console */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
/* Bluetooth */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
uart-has-rtscts;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart4>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dwc3_0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb0_vbus>;
|
|
dr_mode = "otg";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_dwc3_1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb1_vbus>;
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
/* SDIO WiFi */
|
|
&usdhc1 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
|
vmmc-supply = <&buck4>;
|
|
bus-width = <4>;
|
|
non-removable;
|
|
cap-power-off-card;
|
|
keep-power-in-suspend;
|
|
status = "okay";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
brcmf: bcrmf@1 { /* muRata 2AE */
|
|
reg = <1>;
|
|
compatible = "cypress,cyw4373-fmac", "brcm,bcm4329-fmac";
|
|
/*
|
|
* The "host-wake" interrupt output is by default not
|
|
* connected to the SoC, but can be connected on to
|
|
* SoC pin on the carrier board.
|
|
*/
|
|
reset-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
/* SD slot */
|
|
&usdhc2 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
|
|
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
|
|
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
|
|
vmmc-supply = <®_usdhc2_vmmc>;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* eMMC */
|
|
&usdhc3 {
|
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
|
|
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
|
|
vmmc-supply = <&buck4>;
|
|
vqmmc-supply = <&buck5>;
|
|
bus-width = <8>;
|
|
non-removable;
|
|
status = "okay";
|
|
};
|
|
|
|
&wdog1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_wdog>;
|
|
fsl,ext-reset-output;
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-0 = <&pinctrl_hog_base
|
|
&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
|
|
&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
|
|
&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
|
|
&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
|
|
/* GPIO_M is connected to CLKOUT2 */
|
|
&pinctrl_dhcom_int>;
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl_dhcom_a: dhcom-a-grp {
|
|
fsl,pins = <
|
|
/* ENET_QOS_EVENT0-OUT */
|
|
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_b: dhcom-b-grp {
|
|
fsl,pins = <
|
|
/* ENET_QOS_EVENT0-IN */
|
|
MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_c: dhcom-c-grp {
|
|
fsl,pins = <
|
|
/* GPIO_C */
|
|
MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_d: dhcom-d-grp {
|
|
fsl,pins = <
|
|
/* GPIO_D */
|
|
MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_e: dhcom-e-grp {
|
|
fsl,pins = <
|
|
/* GPIO_E */
|
|
MX8MP_IOMUXC_UART1_RXD__GPIO5_IO22 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_f: dhcom-f-grp {
|
|
fsl,pins = <
|
|
/* GPIO_F */
|
|
MX8MP_IOMUXC_UART1_TXD__GPIO5_IO23 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_g: dhcom-g-grp {
|
|
fsl,pins = <
|
|
/* GPIO_G */
|
|
MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_h: dhcom-h-grp {
|
|
fsl,pins = <
|
|
/* GPIO_H */
|
|
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_i: dhcom-i-grp {
|
|
fsl,pins = <
|
|
/* CSI1_SYNC */
|
|
MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_j: dhcom-j-grp {
|
|
fsl,pins = <
|
|
/* CSIx_#RST */
|
|
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_k: dhcom-k-grp {
|
|
fsl,pins = <
|
|
/* CSIx_PWDN */
|
|
MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_l: dhcom-l-grp {
|
|
fsl,pins = <
|
|
/* CSI2_SYNC */
|
|
MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_dhcom_int: dhcom-int-grp {
|
|
fsl,pins = <
|
|
/* INT_HIGHEST_PRIO */
|
|
MX8MP_IOMUXC_SD2_WP__GPIO2_IO20 0x2
|
|
>;
|
|
};
|
|
|
|
pinctrl_hog_base: dhcom-hog-base-grp {
|
|
fsl,pins = <
|
|
/* GPIOs for memory coding */
|
|
MX8MP_IOMUXC_SAI5_RXD1__GPIO3_IO22 0x40000080
|
|
MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23 0x40000080
|
|
MX8MP_IOMUXC_SAI5_RXD3__GPIO3_IO24 0x40000080
|
|
/* GPIOs for hardware coding */
|
|
MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000080
|
|
MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x40000080
|
|
MX8MP_IOMUXC_SAI5_MCLK__GPIO3_IO25 0x40000080
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi1: dhcom-ecspi1-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x44
|
|
MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x44
|
|
MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x44
|
|
MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x40
|
|
>;
|
|
};
|
|
|
|
pinctrl_ecspi2: dhcom-ecspi2-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x44
|
|
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x44
|
|
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x44
|
|
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x40
|
|
>;
|
|
};
|
|
|
|
pinctrl_eqos: dhcom-eqos-grp { /* RGMII */
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3
|
|
MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3
|
|
MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f
|
|
MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f
|
|
MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f
|
|
MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f
|
|
MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f
|
|
MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f
|
|
MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91
|
|
MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91
|
|
MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91
|
|
MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91
|
|
MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91
|
|
MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91
|
|
>;
|
|
};
|
|
|
|
pinctrl_enet_vio: dhcom-enet-vio-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x22
|
|
>;
|
|
};
|
|
|
|
pinctrl_ethphy0: dhcom-ethphy0-grp {
|
|
fsl,pins = <
|
|
/* ENET1_#RST Reset */
|
|
MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x22
|
|
/* ENET1_#INT Interrupt */
|
|
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x22
|
|
>;
|
|
};
|
|
|
|
pinctrl_ethphy1: dhcom-ethphy1-grp {
|
|
fsl,pins = <
|
|
/* ENET1_#RST Reset */
|
|
MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x11
|
|
/* ENET1_#INT Interrupt */
|
|
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x11
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec: dhcom-fec-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SAI1_MCLK__ENET1_TX_CLK 0x1f
|
|
MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
|
|
MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
|
|
MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
|
|
MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
|
|
MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
|
|
MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
|
|
MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
|
|
MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
|
|
MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
|
|
MX8MP_IOMUXC_SAI1_TXD6__ENET1_RX_ER 0x1f
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan1: dhcom-flexcan1-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
|
|
MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexcan2: dhcom-flexcan2-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_UART3_RXD__CAN2_TX 0x154
|
|
MX8MP_IOMUXC_UART3_TXD__CAN2_RX 0x154
|
|
>;
|
|
};
|
|
|
|
pinctrl_flexspi: dhcom-flexspi-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x1c2
|
|
MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82
|
|
MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82
|
|
MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82
|
|
MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82
|
|
MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82
|
|
>;
|
|
};
|
|
|
|
pinctrl_hdmi: dhcom-hdmi-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x154
|
|
MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x154
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3: dhcom-i2c3-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x40000084
|
|
MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x40000084
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c3_gpio: dhcom-i2c3-gpio-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18 0x84
|
|
MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19 0x84
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4: dhcom-i2c4-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x40000084
|
|
MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x40000084
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c4_gpio: dhcom-i2c4-gpio-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x84
|
|
MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x84
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c5: dhcom-i2c5-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x40000084
|
|
MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x40000084
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c5_gpio: dhcom-i2c5-gpio-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26 0x84
|
|
MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27 0x84
|
|
>;
|
|
};
|
|
|
|
pinctrl_pmic: dhcom-pmic-grp {
|
|
fsl,pins = <
|
|
/* PMIC_nINT */
|
|
MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x40000090
|
|
>;
|
|
};
|
|
|
|
pinctrl_pwm1: dhcom-pwm1-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x6
|
|
>;
|
|
};
|
|
|
|
pinctrl_rtc: dhcom-rtc-grp {
|
|
fsl,pins = <
|
|
/* RTC_#INT Interrupt */
|
|
MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x400001c6
|
|
>;
|
|
};
|
|
|
|
pinctrl_touch: dhcom-touch-grp {
|
|
fsl,pins = <
|
|
/* #TOUCH_INT */
|
|
MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x40000080
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: dhcom-uart1-grp {
|
|
fsl,pins = <
|
|
/* Console UART */
|
|
MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX 0x49
|
|
MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX 0x49
|
|
MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS 0x49
|
|
MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: dhcom-uart2-grp {
|
|
fsl,pins = <
|
|
/* Bluetooth UART */
|
|
MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x49
|
|
MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x49
|
|
MX8MP_IOMUXC_SD1_DATA4__UART2_DCE_RTS 0x49
|
|
MX8MP_IOMUXC_SD1_DATA5__UART2_DCE_CTS 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: dhcom-uart3-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX 0x49
|
|
MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX 0x49
|
|
MX8MP_IOMUXC_ECSPI1_SS0__UART3_DCE_RTS 0x49
|
|
MX8MP_IOMUXC_ECSPI1_MISO__UART3_DCE_CTS 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart4: dhcom-uart4-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x49
|
|
MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x49
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb0_vbus: dhcom-usb0-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x0
|
|
>;
|
|
};
|
|
|
|
pinctrl_usb1_vbus: dhcom-usb1-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR 0x6
|
|
MX8MP_IOMUXC_GPIO1_IO15__USB2_OTG_OC 0x80
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1: dhcom-usdhc1-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0
|
|
/* BT_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
/* WL_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_100mhz: dhcom-usdhc1-100mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x194
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d4
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d4
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d4
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d4
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d4
|
|
/* BT_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
/* WL_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc1_200mhz: dhcom-usdhc1-200mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x196
|
|
MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d6
|
|
MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d6
|
|
MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d6
|
|
MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d6
|
|
MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d6
|
|
/* BT_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x144
|
|
/* WL_REG_EN */
|
|
MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13 0x144
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2: dhcom-usdhc2-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x190
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d0
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d0
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_100mhz: dhcom-usdhc2-100mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_200mhz: dhcom-usdhc2-200mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x196
|
|
MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d6
|
|
MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d6
|
|
MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_vmmc: dhcom-usdhc2-vmmc-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x20
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc2_gpio: dhcom-usdhc2-gpio-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x40000080
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3: dhcom-usdhc3-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_100mhz: dhcom-usdhc3-100mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
>;
|
|
};
|
|
|
|
pinctrl_usdhc3_200mhz: dhcom-usdhc3-200mhz-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196
|
|
MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6
|
|
MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6
|
|
MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6
|
|
MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6
|
|
MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6
|
|
MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6
|
|
MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6
|
|
MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6
|
|
MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6
|
|
MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196
|
|
MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x141
|
|
>;
|
|
};
|
|
|
|
pinctrl_wdog: dhcom-wdog-grp {
|
|
fsl,pins = <
|
|
MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6
|
|
>;
|
|
};
|
|
};
|