u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c
Stefan Roese a47a12becf Move arch/ppc to arch/powerpc
As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>
2010-04-21 23:42:38 +02:00

285 lines
8 KiB
C

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <watchdog.h>
#include <mpc8xx.h>
#include <commproc.h>
#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
DECLARE_GLOBAL_DATA_PTR;
#endif
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
defined(CONFIG_SYS_SMC_UCODE_PATCH)
void cpm_load_patch (volatile immap_t * immr);
#endif
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (volatile immap_t * immr)
{
#ifndef CONFIG_MBX
volatile memctl8xx_t *memctl = &immr->im_memctl;
# ifdef CONFIG_SYS_PLPRCR
ulong mfmask;
# endif
#endif
ulong reg;
/* SYPCR - contains watchdog control (11-9) */
immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
#if defined(CONFIG_WATCHDOG)
reset_8xx_watchdog (immr);
#endif /* CONFIG_WATCHDOG */
/* SIUMCR - contains debug pin configuration (11-6) */
#ifndef CONFIG_SVM_SC8xx
immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
#else
immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
#endif
/* initialize timebase status and control register (11-26) */
/* unlock TBSCRK */
immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
/* initialize the PIT (11-31) */
immr->im_sitk.sitk_piscrk = KAPWR_KEY;
immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
/* System integration timers. Don't change EBDF! (15-27) */
immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
reg = immr->im_clkrst.car_sccr;
reg &= SCCR_MASK;
reg |= CONFIG_SYS_SCCR;
immr->im_clkrst.car_sccr = reg;
/* PLL (CPU clock) settings (15-30) */
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
#ifndef CONFIG_MBX /* MBX board does things different */
/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
* set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
* otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
* field value.
*
* For newer (starting MPC866) chips PLPRCR layout is different.
*/
#ifdef CONFIG_SYS_PLPRCR
if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
mfmask = PLPRCR_MFACT_MSK;
else
mfmask = PLPRCR_MF_MSK;
if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
reg = CONFIG_SYS_PLPRCR; /* reset control bits */
else {
reg = immr->im_clkrst.car_plprcr;
reg &= mfmask; /* isolate MF-related fields */
reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
}
immr->im_clkrst.car_plprcr = reg;
#endif
/*
* Memory Controller:
*/
/* perform BR0 reset that MPC850 Rev. A can't guarantee */
reg = memctl->memc_br0;
reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
reg |= BR_V; /* then add just the "Bank Valid" bit */
memctl->memc_br0 = reg;
/* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
* preliminary addresses - these have to be modified later
* when FLASH size has been determined
*
* Depending on the size of the memory region defined by
* CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
* CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
* map CONFIG_SYS_MONITOR_BASE.
*
* For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
* 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
*
* If BR0 wasn't loaded with address base 0xff000000, then BR0's
* base address remains as 0x00000000. However, the address mask
* have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
* into the Bank0.
*
* This is why CONFIG_IVMS8 and similar boards must load BR0 with
* CONFIG_SYS_BR0_PRELIM in advance.
*
* [Thanks to Michael Liao for this explanation.
* I owe him a free beer. - wd]
*/
#if defined(CONFIG_GTH) || \
defined(CONFIG_HERMES) || \
defined(CONFIG_ICU862) || \
defined(CONFIG_IP860) || \
defined(CONFIG_IVML24) || \
defined(CONFIG_IVMS8) || \
defined(CONFIG_LWMON) || \
defined(CONFIG_MHPC) || \
defined(CONFIG_PCU_E) || \
defined(CONFIG_R360MPI) || \
defined(CONFIG_RMU) || \
defined(CONFIG_RPXCLASSIC) || \
defined(CONFIG_RPXLITE) || \
defined(CONFIG_SPC1920) || \
defined(CONFIG_SPD823TS)
memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
#endif
#if defined(CONFIG_SYS_OR0_REMAP)
memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
#endif
#if defined(CONFIG_SYS_OR1_REMAP)
memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
#endif
#if defined(CONFIG_SYS_OR5_REMAP)
memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
#endif
/* now restrict to preliminary range */
memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
#endif
#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
memctl->memc_br0 = 0;
#endif
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
#endif
#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
#endif
#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
#endif
#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
#endif
#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
#endif
#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
#endif
#endif /* ! CONFIG_MBX */
/*
* Reset CPM
*/
immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
do { /* Spin until command processed */
__asm__ ("eieio");
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
#ifdef CONFIG_MBX
/*
* on the MBX, things are a little bit different:
* - we need to read the VPD to get board information
* - the plprcr is set up dynamically
* - the memory controller is set up dynamically
*/
mbx_init ();
#endif /* CONFIG_MBX */
#ifdef CONFIG_RPXCLASSIC
rpxclassic_init ();
#endif
#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
rpxlite_init ();
#endif
#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
/* write config value */
immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
#endif
#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
defined(CONFIG_SYS_SMC_UCODE_PATCH)
cpm_load_patch (immr); /* load mpc8xx microcode patch */
#endif
}
/*
* initialize higher level parts of CPU like timers
*/
int cpu_init_r (void)
{
#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
bd_t *bd = gd->bd;
volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
#endif
#ifdef CONFIG_SYS_RTCSC
/* Unlock RTSC register */
immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
/* write config value */
immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
#endif
#ifdef CONFIG_SYS_RMDS
/* write config value */
immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
#endif
return (0);
}