u-boot/board/freescale/common
Ashish Kumar fe997689c3 fsl: common: qixis: Add ifc and emmc switching via qixis
Currently only SD, NAND can be secondary boot sources controlled
by FPGA/CPLD via qixis commands. For SoC like LS1088 IFC-NOR
can be secondary boot source, while QSPI-NOR is the primary.
Add options in qixis to switch to other boot sources including
ifc and emmc.

Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-23 11:22:12 -08:00
..
p_corenet powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
arm_sleep.c armv7: ls1021a: Drop macro CONFIG_LS102XA 2017-04-17 09:03:30 -07:00
cadmus.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cadmus.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cds_pci_ft.c fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
cds_via.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cmd_esbc_validate.c freescale: Ensure common commands are not included in SPL binary 2018-01-17 10:30:45 -08:00
dcu_sii9022a.c video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
dcu_sii9022a.h video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
diu_ch7301.c fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
diu_ch7301.h fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
eeprom.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
fman.c freescale: fman: make sure phy-handle property is big endian 2015-12-13 18:27:28 -08:00
fman.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
fsl_chain_of_trust.c env: Rename setenv() to env_set() 2017-08-16 08:22:18 -04:00
fsl_validate.c dm: Use dm.h header when driver mode is used 2017-06-01 06:57:52 -06:00
ics307_clk.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ics307_clk.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
idt8t49n222a_serdes_clk.c powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
idt8t49n222a_serdes_clk.h powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
Kconfig Kconfig: Add LTC3882 voltage regulator config 2018-01-23 11:19:49 -08:00
ls102xa_stream_id.c board: ls102xa: Fix ICID setup 2016-06-03 14:12:06 -07:00
Makefile common: board_f: vid: Add VID specific API to adjust core voltage 2018-01-23 11:20:46 -08:00
mc34vr500.c pmic: pmic_mc34vr500: Add APIs to set/get SWx volt 2017-01-18 09:28:57 -08:00
mpc85xx_sleep.c qe: move drivers/qe/qe.h to include/fsl_qe.h 2016-02-24 08:51:13 -08:00
ngpixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ngpixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ns_access.c fsl-lsch2: csu: correct the workaround A-010315 2017-08-09 09:57:33 -07:00
pfuze.c board: freescale: common: add pfuze dm code 2018-01-12 14:28:04 +01:00
pfuze.h board: freescale: common: add pfuze dm code 2018-01-12 14:28:04 +01:00
pixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pixis.h powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCN 2016-11-23 23:42:16 -08:00
pq-mds-pib.c powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDS 2016-11-23 23:42:06 -08:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
qixis.c fsl: common: qixis: Add ifc and emmc switching via qixis 2018-01-23 11:22:12 -08:00
qixis.h mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card 2015-11-02 08:50:29 -08:00
sdhc_boot.c block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
sgmii_riser.c powerpc/sgmii: To support PHY link state auto detect in SGMII mode 2012-08-08 18:32:15 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sleep.h fsl/sleep: updated the deep sleep framework for QorIQ platforms 2014-12-11 09:41:18 -08:00
spl.h spi: Move freescale-specific code into a private header 2016-10-06 15:07:35 -04:00
sys_eeprom.c env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
vid.c board: common: vid: Add support for LTC3882 voltage regulator chip 2018-01-23 11:19:56 -08:00
vid.h board/freescale/common: Check IR chip mode for VID support 2016-01-25 12:37:03 -08:00
vsc3316_3308.c powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
vsc3316_3308.h powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
zm7300.c arch, board: squash lines for immediate return 2016-09-23 17:53:53 -04:00
zm7300.h board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00