mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 23:21:01 +00:00
882b7d726f
The duplication of the do_reset prototype has gotten out of hand, and they're not all in sync. Unify them all in command.h. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
393 lines
11 KiB
C
393 lines
11 KiB
C
/*
|
|
* (C) Copyright 2001-2004
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
extern void lxt971_no_sleep(void);
|
|
|
|
/* fpga configuration data - gzip compressed and generated by bin2c */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
|
|
/* logo bitmap data - gzip compressed and generated by bin2c */
|
|
unsigned char logo_bmp_320[] =
|
|
{
|
|
#include "logo_320_240_4bpp.c"
|
|
};
|
|
|
|
unsigned char logo_bmp_640[] =
|
|
{
|
|
#include "logo_640_480_24bpp.c"
|
|
};
|
|
|
|
|
|
/*
|
|
* include common lcd code (for esd boards)
|
|
*/
|
|
#include "../common/lcd.c"
|
|
|
|
#include "../common/s1d13704_320_240_4bpp.h"
|
|
#include "../common/s1d13806_320_240_4bpp.h"
|
|
#include "../common/s1d13806_640_480_16bpp.h"
|
|
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
/*
|
|
* IRQ 0-15 405GP internally generated; active high; level sensitive
|
|
* IRQ 16 405GP internally generated; active low; level sensitive
|
|
* IRQ 17-24 RESERVED
|
|
* IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
|
|
* IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
|
|
* IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
|
|
* IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
|
|
* IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
|
|
* IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
|
|
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
|
|
*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
mtdcr(UIC0ER, 0x00000000); /* disable all ints */
|
|
mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
|
|
mtdcr(UIC0PR, 0xFFFFFFB5); /* set int polarities */
|
|
mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
|
|
mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
|
|
mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
|
|
|
|
/*
|
|
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
|
|
*/
|
|
mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
|
|
unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
|
|
unsigned short *lcd_contrast =
|
|
(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
|
|
unsigned short *lcd_backlight =
|
|
(unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
|
|
unsigned char *dst;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
char *str;
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset (NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i=20; i>0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index=0;index<1000;index++)
|
|
udelay(1000);
|
|
}
|
|
putc ('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
|
|
free(dst);
|
|
|
|
/*
|
|
* Reset FPGA via FPGA_INIT pin
|
|
*/
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~FPGA_INIT); /* reset low */
|
|
udelay(1000); /* wait 1ms */
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | FPGA_INIT); /* reset high */
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Reset external DUARTs
|
|
*/
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
|
|
udelay(10); /* wait 10us */
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
|
|
udelay(1000); /* wait 1ms */
|
|
|
|
/*
|
|
* Set NAND-FLASH GPIO signals to default
|
|
*/
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE));
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_NAND_CE);
|
|
|
|
/*
|
|
* Setup EEPROM write protection
|
|
*/
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_EEPROM_WP);
|
|
|
|
/*
|
|
* Enable interrupts in exar duart mcr[3]
|
|
*/
|
|
out_8(duart0_mcr, 0x08);
|
|
out_8(duart1_mcr, 0x08);
|
|
|
|
/*
|
|
* Init lcd interface and display logo
|
|
*/
|
|
str = getenv("bd_type");
|
|
if (strcmp(str, "voh405_bw") == 0) {
|
|
lcd_setup(0, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
|
|
regs_13704_320_240_4bpp,
|
|
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
|
|
logo_bmp_320, sizeof(logo_bmp_320));
|
|
} else if (strcmp(str, "voh405_bwbw") == 0) {
|
|
lcd_setup(0, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
|
|
regs_13704_320_240_4bpp,
|
|
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
|
|
logo_bmp_320, sizeof(logo_bmp_320));
|
|
lcd_setup(1, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_320_240_4bpp,
|
|
sizeof(regs_13806_320_240_4bpp)/sizeof(regs_13806_320_240_4bpp[0]),
|
|
logo_bmp_320, sizeof(logo_bmp_320));
|
|
} else if (strcmp(str, "voh405_bwc") == 0) {
|
|
lcd_setup(0, 1);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
|
|
regs_13704_320_240_4bpp,
|
|
sizeof(regs_13704_320_240_4bpp)/sizeof(regs_13704_320_240_4bpp[0]),
|
|
logo_bmp_320, sizeof(logo_bmp_320));
|
|
lcd_setup(1, 0);
|
|
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
|
|
regs_13806_640_480_16bpp,
|
|
sizeof(regs_13806_640_480_16bpp)/sizeof(regs_13806_640_480_16bpp[0]),
|
|
logo_bmp_640, sizeof(logo_bmp_640));
|
|
} else {
|
|
printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set invert bit in small lcd controller
|
|
*/
|
|
out_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2),
|
|
in_8((unsigned char *)(CONFIG_SYS_LCD_SMALL_REG + 2)) | 0x01);
|
|
|
|
/*
|
|
* Set default contrast voltage on epson vga controller
|
|
*/
|
|
out_be16(lcd_contrast, 0x4646);
|
|
|
|
/*
|
|
* Enable backlight
|
|
*/
|
|
out_be16(lcd_backlight, 0xffff);
|
|
|
|
/*
|
|
* Enable external I2C bus
|
|
*/
|
|
out_be32((void*)GPIO0_TCR, in_be32((void*)GPIO0_TCR) | CONFIG_SYS_IIC_ON);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
char str[64];
|
|
int i = getenv_f("serial#", str, sizeof(str));
|
|
|
|
puts ("Board: ");
|
|
|
|
if (i == -1) {
|
|
puts ("### No HW ID - assuming VOH405");
|
|
} else {
|
|
puts(str);
|
|
}
|
|
|
|
if (getenv_f("bd_type", str, sizeof(str)) != -1) {
|
|
printf(" (%s)", str);
|
|
} else {
|
|
puts(" (Missing bd_type!)");
|
|
}
|
|
|
|
putc ('\n');
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_IDE_RESET
|
|
#define FPGA_MODE (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
|
|
void ide_set_reset(int on)
|
|
{
|
|
/*
|
|
* Assert or deassert CompactFlash Reset Pin
|
|
*/
|
|
if (on) { /* assert RESET */
|
|
out_be16((void *)FPGA_MODE,
|
|
in_be16((void *)FPGA_MODE) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
} else { /* release RESET */
|
|
out_be16((void *)FPGA_MODE,
|
|
in_be16((void *)FPGA_MODE) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
|
|
}
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
#if defined(CONFIG_RESET_PHY_R)
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_LXT971_NO_SLEEP
|
|
|
|
/*
|
|
* Disable sleep mode in LXT971
|
|
*/
|
|
lxt971_no_sleep();
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
/* Input: <dev_addr> I2C address of EEPROM device to enable.
|
|
* <state> -1: deliver current state
|
|
* 0: disable write
|
|
* 1: enable write
|
|
* Returns: -1: wrong device address
|
|
* 0: dis-/en- able done
|
|
* 0/1: current state if <state> was -1.
|
|
*/
|
|
int eeprom_write_enable (unsigned dev_addr, int state)
|
|
{
|
|
if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
|
|
return -1;
|
|
} else {
|
|
switch (state) {
|
|
case 1:
|
|
/* Enable write access, clear bit GPIO0. */
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
case 0:
|
|
/* Disable write access, set bit GPIO0. */
|
|
out_be32((void*)GPIO0_OR, in_be32((void*)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
|
|
state = 0;
|
|
break;
|
|
default:
|
|
/* Read current status back. */
|
|
state = (0 == (in_be32((void*)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
|
|
break;
|
|
}
|
|
}
|
|
return state;
|
|
}
|
|
|
|
int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int query = argc == 1;
|
|
int state = 0;
|
|
|
|
if (query) {
|
|
/* Query write access state. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
|
|
if (state < 0) {
|
|
puts ("Query of write access state failed.\n");
|
|
} else {
|
|
printf ("Write access for device 0x%0x is %sabled.\n",
|
|
CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
|
|
state = 0;
|
|
}
|
|
} else {
|
|
if ('0' == argv[1][0]) {
|
|
/* Disable write access. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
|
|
} else {
|
|
/* Enable write access. */
|
|
state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
|
|
}
|
|
if (state < 0) {
|
|
puts ("Setup of write access state failed.\n");
|
|
}
|
|
}
|
|
|
|
return state;
|
|
}
|
|
|
|
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
|
|
"Enable / disable / query EEPROM write access",
|
|
""
|
|
);
|
|
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
|