u-boot/arch/arm/cpu/armv7/mx6/ddr.c
Peng Fan a462c34602 imx:mx6ul add dram spl configuration and header file
1. Define two structures mx6ul_iomux_ddr_regs and mx6ul_iomux_grp_regs.
2. Add a new function mx6ul_dram_iocfg to configure dram io.
3. Refactor MMDC1 macro, discard "#ifdef CONFIG_MX6SX". Since
   only mmdc0 channel exists on i.MX6SX/UL, redefine MMDC1 macro support
   runtime check, but not hardcoding #ifdef macros.
4. Introduce mx6ul-ddr.h, which includes the register address for DRAM
   IO configuration.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:09 +02:00

600 lines
19 KiB
C

/*
* Copyright (C) 2014 Gateworks Corporation
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/types.h>
#include <asm/arch/mx6-ddr.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <asm/types.h>
#if defined(CONFIG_MX6SX)
/* Configure MX6SX mmdc iomux */
void mx6sx_dram_iocfg(unsigned width,
const struct mx6sx_iomux_ddr_regs *ddr,
const struct mx6sx_iomux_grp_regs *grp)
{
struct mx6sx_iomux_ddr_regs *mx6_ddr_iomux;
struct mx6sx_iomux_grp_regs *mx6_grp_iomux;
mx6_ddr_iomux = (struct mx6sx_iomux_ddr_regs *)MX6SX_IOM_DDR_BASE;
mx6_grp_iomux = (struct mx6sx_iomux_grp_regs *)MX6SX_IOM_GRP_BASE;
/* DDR IO TYPE */
writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
/* CLOCK */
writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
/* ADDRESS */
writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
/* Control */
writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
writel(ddr->dram_sdcke0, &mx6_ddr_iomux->dram_sdcke0);
writel(ddr->dram_sdcke1, &mx6_ddr_iomux->dram_sdcke1);
writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
/* Data Strobes */
writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
if (width >= 32) {
writel(ddr->dram_sdqs2, &mx6_ddr_iomux->dram_sdqs2);
writel(ddr->dram_sdqs3, &mx6_ddr_iomux->dram_sdqs3);
}
/* Data */
writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
if (width >= 32) {
writel(grp->grp_b2ds, &mx6_grp_iomux->grp_b2ds);
writel(grp->grp_b3ds, &mx6_grp_iomux->grp_b3ds);
}
writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
if (width >= 32) {
writel(ddr->dram_dqm2, &mx6_ddr_iomux->dram_dqm2);
writel(ddr->dram_dqm3, &mx6_ddr_iomux->dram_dqm3);
}
}
#endif
#ifdef CONFIG_MX6UL
void mx6ul_dram_iocfg(unsigned width,
const struct mx6ul_iomux_ddr_regs *ddr,
const struct mx6ul_iomux_grp_regs *grp)
{
struct mx6ul_iomux_ddr_regs *mx6_ddr_iomux;
struct mx6ul_iomux_grp_regs *mx6_grp_iomux;
mx6_ddr_iomux = (struct mx6ul_iomux_ddr_regs *)MX6UL_IOM_DDR_BASE;
mx6_grp_iomux = (struct mx6ul_iomux_grp_regs *)MX6UL_IOM_GRP_BASE;
/* DDR IO TYPE */
writel(grp->grp_ddr_type, &mx6_grp_iomux->grp_ddr_type);
writel(grp->grp_ddrpke, &mx6_grp_iomux->grp_ddrpke);
/* CLOCK */
writel(ddr->dram_sdclk_0, &mx6_ddr_iomux->dram_sdclk_0);
/* ADDRESS */
writel(ddr->dram_cas, &mx6_ddr_iomux->dram_cas);
writel(ddr->dram_ras, &mx6_ddr_iomux->dram_ras);
writel(grp->grp_addds, &mx6_grp_iomux->grp_addds);
/* Control */
writel(ddr->dram_reset, &mx6_ddr_iomux->dram_reset);
writel(ddr->dram_sdba2, &mx6_ddr_iomux->dram_sdba2);
writel(ddr->dram_odt0, &mx6_ddr_iomux->dram_odt0);
writel(ddr->dram_odt1, &mx6_ddr_iomux->dram_odt1);
writel(grp->grp_ctlds, &mx6_grp_iomux->grp_ctlds);
/* Data Strobes */
writel(grp->grp_ddrmode_ctl, &mx6_grp_iomux->grp_ddrmode_ctl);
writel(ddr->dram_sdqs0, &mx6_ddr_iomux->dram_sdqs0);
writel(ddr->dram_sdqs1, &mx6_ddr_iomux->dram_sdqs1);
/* Data */
writel(grp->grp_ddrmode, &mx6_grp_iomux->grp_ddrmode);
writel(grp->grp_b0ds, &mx6_grp_iomux->grp_b0ds);
writel(grp->grp_b1ds, &mx6_grp_iomux->grp_b1ds);
writel(ddr->dram_dqm0, &mx6_ddr_iomux->dram_dqm0);
writel(ddr->dram_dqm1, &mx6_ddr_iomux->dram_dqm1);
}
#endif
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
/* Configure MX6DQ mmdc iomux */
void mx6dq_dram_iocfg(unsigned width,
const struct mx6dq_iomux_ddr_regs *ddr,
const struct mx6dq_iomux_grp_regs *grp)
{
volatile struct mx6dq_iomux_ddr_regs *mx6_ddr_iomux;
volatile struct mx6dq_iomux_grp_regs *mx6_grp_iomux;
mx6_ddr_iomux = (struct mx6dq_iomux_ddr_regs *)MX6DQ_IOM_DDR_BASE;
mx6_grp_iomux = (struct mx6dq_iomux_grp_regs *)MX6DQ_IOM_GRP_BASE;
/* DDR IO Type */
mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
/* Clock */
mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
/* Address */
mx6_ddr_iomux->dram_cas = ddr->dram_cas;
mx6_ddr_iomux->dram_ras = ddr->dram_ras;
mx6_grp_iomux->grp_addds = grp->grp_addds;
/* Control */
mx6_ddr_iomux->dram_reset = ddr->dram_reset;
mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
/* Data Strobes */
mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
if (width >= 32) {
mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
}
if (width >= 64) {
mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
}
/* Data */
mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
if (width >= 32) {
mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
}
if (width >= 64) {
mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
}
mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
if (width >= 32) {
mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
}
if (width >= 64) {
mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
}
}
#endif
#if defined(CONFIG_MX6QDL) || defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
/* Configure MX6SDL mmdc iomux */
void mx6sdl_dram_iocfg(unsigned width,
const struct mx6sdl_iomux_ddr_regs *ddr,
const struct mx6sdl_iomux_grp_regs *grp)
{
volatile struct mx6sdl_iomux_ddr_regs *mx6_ddr_iomux;
volatile struct mx6sdl_iomux_grp_regs *mx6_grp_iomux;
mx6_ddr_iomux = (struct mx6sdl_iomux_ddr_regs *)MX6SDL_IOM_DDR_BASE;
mx6_grp_iomux = (struct mx6sdl_iomux_grp_regs *)MX6SDL_IOM_GRP_BASE;
/* DDR IO Type */
mx6_grp_iomux->grp_ddr_type = grp->grp_ddr_type;
mx6_grp_iomux->grp_ddrpke = grp->grp_ddrpke;
/* Clock */
mx6_ddr_iomux->dram_sdclk_0 = ddr->dram_sdclk_0;
mx6_ddr_iomux->dram_sdclk_1 = ddr->dram_sdclk_1;
/* Address */
mx6_ddr_iomux->dram_cas = ddr->dram_cas;
mx6_ddr_iomux->dram_ras = ddr->dram_ras;
mx6_grp_iomux->grp_addds = grp->grp_addds;
/* Control */
mx6_ddr_iomux->dram_reset = ddr->dram_reset;
mx6_ddr_iomux->dram_sdcke0 = ddr->dram_sdcke0;
mx6_ddr_iomux->dram_sdcke1 = ddr->dram_sdcke1;
mx6_ddr_iomux->dram_sdba2 = ddr->dram_sdba2;
mx6_ddr_iomux->dram_sdodt0 = ddr->dram_sdodt0;
mx6_ddr_iomux->dram_sdodt1 = ddr->dram_sdodt1;
mx6_grp_iomux->grp_ctlds = grp->grp_ctlds;
/* Data Strobes */
mx6_grp_iomux->grp_ddrmode_ctl = grp->grp_ddrmode_ctl;
mx6_ddr_iomux->dram_sdqs0 = ddr->dram_sdqs0;
mx6_ddr_iomux->dram_sdqs1 = ddr->dram_sdqs1;
if (width >= 32) {
mx6_ddr_iomux->dram_sdqs2 = ddr->dram_sdqs2;
mx6_ddr_iomux->dram_sdqs3 = ddr->dram_sdqs3;
}
if (width >= 64) {
mx6_ddr_iomux->dram_sdqs4 = ddr->dram_sdqs4;
mx6_ddr_iomux->dram_sdqs5 = ddr->dram_sdqs5;
mx6_ddr_iomux->dram_sdqs6 = ddr->dram_sdqs6;
mx6_ddr_iomux->dram_sdqs7 = ddr->dram_sdqs7;
}
/* Data */
mx6_grp_iomux->grp_ddrmode = grp->grp_ddrmode;
mx6_grp_iomux->grp_b0ds = grp->grp_b0ds;
mx6_grp_iomux->grp_b1ds = grp->grp_b1ds;
if (width >= 32) {
mx6_grp_iomux->grp_b2ds = grp->grp_b2ds;
mx6_grp_iomux->grp_b3ds = grp->grp_b3ds;
}
if (width >= 64) {
mx6_grp_iomux->grp_b4ds = grp->grp_b4ds;
mx6_grp_iomux->grp_b5ds = grp->grp_b5ds;
mx6_grp_iomux->grp_b6ds = grp->grp_b6ds;
mx6_grp_iomux->grp_b7ds = grp->grp_b7ds;
}
mx6_ddr_iomux->dram_dqm0 = ddr->dram_dqm0;
mx6_ddr_iomux->dram_dqm1 = ddr->dram_dqm1;
if (width >= 32) {
mx6_ddr_iomux->dram_dqm2 = ddr->dram_dqm2;
mx6_ddr_iomux->dram_dqm3 = ddr->dram_dqm3;
}
if (width >= 64) {
mx6_ddr_iomux->dram_dqm4 = ddr->dram_dqm4;
mx6_ddr_iomux->dram_dqm5 = ddr->dram_dqm5;
mx6_ddr_iomux->dram_dqm6 = ddr->dram_dqm6;
mx6_ddr_iomux->dram_dqm7 = ddr->dram_dqm7;
}
}
#endif
/*
* Configure mx6 mmdc registers based on:
* - board-specific memory configuration
* - board-specific calibration data
* - ddr3 chip details
*
* The various calculations here are derived from the Freescale
* i.Mx6DQSDL DDR3 Script Aid spreadsheet (DOC-94917) designed to generate MMDC
* configuration registers based on memory system and memory chip parameters.
*
* The defaults here are those which were specified in the spreadsheet.
* For details on each register, refer to the IMX6DQRM and/or IMX6SDLRM
* section titled MMDC initialization
*/
#define MR(val, ba, cmd, cs1) \
((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba)
#define MMDC1(entry, value) do { \
if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL)) \
mmdc1->entry = value; \
} while (0)
void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo,
const struct mx6_mmdc_calibration *calib,
const struct mx6_ddr3_cfg *ddr3_cfg)
{
volatile struct mmdc_p_regs *mmdc0;
volatile struct mmdc_p_regs *mmdc1;
u32 val;
u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd;
u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl;
u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */
u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr;
u16 cs0_end;
u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */
u8 coladdr;
int clkper; /* clock period in picoseconds */
int clock; /* clock freq in MHz */
int cs;
u16 mem_speed = ddr3_cfg->mem_speed;
mmdc0 = (struct mmdc_p_regs *)MMDC_P0_BASE_ADDR;
if (!is_cpu_type(MXC_CPU_MX6SX) && !is_cpu_type(MXC_CPU_MX6UL))
mmdc1 = (struct mmdc_p_regs *)MMDC_P1_BASE_ADDR;
/* Limit mem_speed for MX6D/MX6Q */
if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
if (mem_speed > 1066)
mem_speed = 1066; /* 1066 MT/s */
tcwl = 4;
}
/* Limit mem_speed for MX6S/MX6DL */
else {
if (mem_speed > 800)
mem_speed = 800; /* 800 MT/s */
tcwl = 3;
}
clock = mem_speed / 2;
/*
* Data rate of 1066 MT/s requires 533 MHz DDR3 clock, but MX6D/Q supports
* up to 528 MHz, so reduce the clock to fit chip specs
*/
if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D)) {
if (clock > 528)
clock = 528; /* 528 MHz */
}
clkper = (1000 * 1000) / clock; /* pico seconds */
todtlon = tcwl;
taxpd = tcwl;
tanpd = tcwl;
switch (ddr3_cfg->density) {
case 1: /* 1Gb per chip */
trfc = DIV_ROUND_UP(110000, clkper) - 1;
txs = DIV_ROUND_UP(120000, clkper) - 1;
break;
case 2: /* 2Gb per chip */
trfc = DIV_ROUND_UP(160000, clkper) - 1;
txs = DIV_ROUND_UP(170000, clkper) - 1;
break;
case 4: /* 4Gb per chip */
trfc = DIV_ROUND_UP(260000, clkper) - 1;
txs = DIV_ROUND_UP(270000, clkper) - 1;
break;
case 8: /* 8Gb per chip */
trfc = DIV_ROUND_UP(350000, clkper) - 1;
txs = DIV_ROUND_UP(360000, clkper) - 1;
break;
default:
/* invalid density */
puts("invalid chip density\n");
hang();
break;
}
txpr = txs;
switch (mem_speed) {
case 800:
txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(40000, clkper) - 1;
trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
}
break;
case 1066:
txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1;
tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1;
if (ddr3_cfg->pagesz == 1) {
tfaw = DIV_ROUND_UP(37500, clkper) - 1;
trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1;
} else {
tfaw = DIV_ROUND_UP(50000, clkper) - 1;
trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1;
}
break;
default:
puts("invalid memory speed\n");
hang();
break;
}
txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1;
tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper);
taonpd = DIV_ROUND_UP(2000, clkper) - 1;
tcksrx = tcksre;
taofpd = taonpd;
twr = DIV_ROUND_UP(15000, clkper) - 1;
tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1;
trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1;
tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1;
tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3;
trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1;
twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1;
trcd = trp;
trtp = twtr;
cs0_end = 4 * sysinfo->cs_density - 1;
debug("density:%d Gb (%d Gb per chip)\n",
sysinfo->cs_density, ddr3_cfg->density);
debug("clock: %dMHz (%d ps)\n", clock, clkper);
debug("memspd:%d\n", mem_speed);
debug("tcke=%d\n", tcke);
debug("tcksrx=%d\n", tcksrx);
debug("tcksre=%d\n", tcksre);
debug("taofpd=%d\n", taofpd);
debug("taonpd=%d\n", taonpd);
debug("todtlon=%d\n", todtlon);
debug("tanpd=%d\n", tanpd);
debug("taxpd=%d\n", taxpd);
debug("trfc=%d\n", trfc);
debug("txs=%d\n", txs);
debug("txp=%d\n", txp);
debug("txpdll=%d\n", txpdll);
debug("tfaw=%d\n", tfaw);
debug("tcl=%d\n", tcl);
debug("trcd=%d\n", trcd);
debug("trp=%d\n", trp);
debug("trc=%d\n", trc);
debug("tras=%d\n", tras);
debug("twr=%d\n", twr);
debug("tmrd=%d\n", tmrd);
debug("tcwl=%d\n", tcwl);
debug("tdllk=%d\n", tdllk);
debug("trtp=%d\n", trtp);
debug("twtr=%d\n", twtr);
debug("trrd=%d\n", trrd);
debug("txpr=%d\n", txpr);
debug("cs0_end=%d\n", cs0_end);
debug("ncs=%d\n", sysinfo->ncs);
debug("Rtt_wr=%d\n", sysinfo->rtt_wr);
debug("Rtt_nom=%d\n", sysinfo->rtt_nom);
debug("SRT=%d\n", ddr3_cfg->SRT);
debug("tcl=%d\n", tcl);
debug("twr=%d\n", twr);
/*
* board-specific configuration:
* These values are determined empirically and vary per board layout
* see:
* appnote, ddr3 spreadsheet
*/
mmdc0->mpwldectrl0 = calib->p0_mpwldectrl0;
mmdc0->mpwldectrl1 = calib->p0_mpwldectrl1;
mmdc0->mpdgctrl0 = calib->p0_mpdgctrl0;
mmdc0->mpdgctrl1 = calib->p0_mpdgctrl1;
mmdc0->mprddlctl = calib->p0_mprddlctl;
mmdc0->mpwrdlctl = calib->p0_mpwrdlctl;
if (sysinfo->dsize > 1) {
MMDC1(mpwldectrl0, calib->p1_mpwldectrl0);
MMDC1(mpwldectrl1, calib->p1_mpwldectrl1);
MMDC1(mpdgctrl0, calib->p1_mpdgctrl0);
MMDC1(mpdgctrl1, calib->p1_mpdgctrl1);
MMDC1(mprddlctl, calib->p1_mprddlctl);
MMDC1(mpwrdlctl, calib->p1_mpwrdlctl);
}
/* Read data DQ Byte0-3 delay */
mmdc0->mprddqby0dl = 0x33333333;
mmdc0->mprddqby1dl = 0x33333333;
if (sysinfo->dsize > 0) {
mmdc0->mprddqby2dl = 0x33333333;
mmdc0->mprddqby3dl = 0x33333333;
}
if (sysinfo->dsize > 1) {
MMDC1(mprddqby0dl, 0x33333333);
MMDC1(mprddqby1dl, 0x33333333);
MMDC1(mprddqby2dl, 0x33333333);
MMDC1(mprddqby3dl, 0x33333333);
}
/* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */
val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227;
mmdc0->mpodtctrl = val;
if (sysinfo->dsize > 1)
MMDC1(mpodtctrl, val);
/* complete calibration */
val = (1 << 11); /* Force measurement on delay-lines */
mmdc0->mpmur0 = val;
if (sysinfo->dsize > 1)
MMDC1(mpmur0, val);
/* Step 1: configuration request */
mmdc0->mdscr = (u32)(1 << 15); /* config request */
/* Step 2: Timing configuration */
mmdc0->mdcfg0 = (trfc << 24) | (txs << 16) | (txp << 13) |
(txpdll << 9) | (tfaw << 4) | tcl;
mmdc0->mdcfg1 = (trcd << 29) | (trp << 26) | (trc << 21) |
(tras << 16) | (1 << 15) /* trpa */ |
(twr << 9) | (tmrd << 5) | tcwl;
mmdc0->mdcfg2 = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd;
mmdc0->mdotc = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) |
(taxpd << 16) | (todtlon << 12) | (todt_idle_off << 4);
mmdc0->mdasp = cs0_end; /* CS addressing */
/* Step 3: Configure DDR type */
mmdc0->mdmisc = (sysinfo->cs1_mirror << 19) | (sysinfo->walat << 16) |
(sysinfo->bi_on << 12) | (sysinfo->mif3_mode << 9) |
(sysinfo->ralat << 6);
/* Step 4: Configure delay while leaving reset */
mmdc0->mdor = (txpr << 16) | (sysinfo->sde_to_rst << 8) |
(sysinfo->rst_to_cke << 0);
/* Step 5: Configure DDR physical parameters (density and burst len) */
coladdr = ddr3_cfg->coladdr;
if (ddr3_cfg->coladdr == 8) /* 8-bit COL is 0x3 */
coladdr += 4;
else if (ddr3_cfg->coladdr == 12) /* 12-bit COL is 0x4 */
coladdr += 1;
mmdc0->mdctl = (ddr3_cfg->rowaddr - 11) << 24 | /* ROW */
(coladdr - 9) << 20 | /* COL */
(1 << 19) | /* Burst Length = 8 for DDR3 */
(sysinfo->dsize << 16); /* DDR data bus size */
/* Step 6: Perform ZQ calibration */
val = 0xa1390001; /* one-time HW ZQ calib */
mmdc0->mpzqhwctrl = val;
if (sysinfo->dsize > 1)
MMDC1(mpzqhwctrl, val);
/* Step 7: Enable MMDC with desired chip select */
mmdc0->mdctl |= (1 << 31) | /* SDE_0 for CS0 */
((sysinfo->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */
/* Step 8: Write Mode Registers to Init DDR3 devices */
for (cs = 0; cs < sysinfo->ncs; cs++) {
/* MR2 */
val = (sysinfo->rtt_wr & 3) << 9 | (ddr3_cfg->SRT & 1) << 7 |
((tcwl - 3) & 3) << 3;
debug("MR2 CS%d: 0x%08x\n", cs, (u32)MR(val, 2, 3, cs));
mmdc0->mdscr = MR(val, 2, 3, cs);
/* MR3 */
debug("MR3 CS%d: 0x%08x\n", cs, (u32)MR(0, 3, 3, cs));
mmdc0->mdscr = MR(0, 3, 3, cs);
/* MR1 */
val = ((sysinfo->rtt_nom & 1) ? 1 : 0) << 2 |
((sysinfo->rtt_nom & 2) ? 1 : 0) << 6;
debug("MR1 CS%d: 0x%08x\n", cs, (u32)MR(val, 1, 3, cs));
mmdc0->mdscr = MR(val, 1, 3, cs);
/* MR0 */
val = ((tcl - 1) << 4) | /* CAS */
(1 << 8) | /* DLL Reset */
((twr - 3) << 9) | /* Write Recovery */
(sysinfo->pd_fast_exit << 12); /* Precharge PD PLL on */
debug("MR0 CS%d: 0x%08x\n", cs, (u32)MR(val, 0, 3, cs));
mmdc0->mdscr = MR(val, 0, 3, cs);
/* ZQ calibration */
val = (1 << 10);
mmdc0->mdscr = MR(val, 0, 4, cs);
}
/* Step 10: Power down control and self-refresh */
mmdc0->mdpdc = (tcke & 0x7) << 16 |
5 << 12 | /* PWDT_1: 256 cycles */
5 << 8 | /* PWDT_0: 256 cycles */
1 << 6 | /* BOTH_CS_PD */
(tcksrx & 0x7) << 3 |
(tcksre & 0x7);
if (!sysinfo->pd_fast_exit)
mmdc0->mdpdc |= (1 << 7); /* SLOW_PD */
mmdc0->mapsr = 0x00001006; /* ADOPT power down enabled */
/* Step 11: Configure ZQ calibration: one-time and periodic 1ms */
val = 0xa1390003;
mmdc0->mpzqhwctrl = val;
if (sysinfo->dsize > 1)
MMDC1(mpzqhwctrl, val);
/* Step 12: Configure and activate periodic refresh */
mmdc0->mdref = (1 << 14) | /* REF_SEL: Periodic refresh cycle: 32kHz */
(7 << 11); /* REFR: Refresh Rate - 8 refreshes */
/* Step 13: Deassert config request - init complete */
mmdc0->mdscr = 0x00000000;
/* wait for auto-ZQ calibration to complete */
mdelay(1);
}