u-boot/board/freescale/common/emc2305.c
Wasim Khan c63edbc750 board: freescale: emc2305: Pass chip_addr to set_fan_speed
emc2305 is a common driver. It should not use platform specific
i2c address for slave device.
Pass chip_addr as agrument to emc2305_init() and set_fan_speed()
so that emc2305 driver can be used with different platforms.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-24 20:57:32 +05:30

61 lines
1.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018-2020 NXP.
*
*/
#include <common.h>
#include <command.h>
#include <i2c.h>
#include <asm/io.h>
#include "emc2305.h"
DECLARE_GLOBAL_DATA_PTR;
void set_fan_speed(u8 data, int chip_addr)
{
u8 index;
u8 Fan[NUM_OF_FANS] = {I2C_EMC2305_FAN1,
I2C_EMC2305_FAN2,
I2C_EMC2305_FAN3,
I2C_EMC2305_FAN4,
I2C_EMC2305_FAN5};
for (index = 0; index < NUM_OF_FANS; index++) {
#ifndef CONFIG_DM_I2C
if (i2c_write(chip_addr, Fan[index], 1, &data, 1) != 0) {
printf("Error: failed to change fan speed @%x\n",
Fan[index]);
}
#else
struct udevice *dev;
if (i2c_get_chip_for_busnum(0, chip_addr, 1, &dev))
continue;
if (dm_i2c_write(dev, Fan[index], &data, 1) != 0) {
printf("Error: failed to change fan speed @%x\n",
Fan[index]);
}
#endif
}
}
void emc2305_init(int chip_addr)
{
u8 data;
data = I2C_EMC2305_CMD;
#ifndef CONFIG_DM_I2C
if (i2c_write(chip_addr, I2C_EMC2305_CONF, 1, &data, 1) != 0)
printf("Error: failed to configure EMC2305\n");
#else
struct udevice *dev;
if (!i2c_get_chip_for_busnum(0, chip_addr, 1, &dev))
if (dm_i2c_write(dev, I2C_EMC2305_CONF, &data, 1))
printf("Error: failed to configure EMC2305\n");
#endif
}