mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
b70ed300b0
There have been 3 versions of the sunxi_emac support patch during its development. Somehow version 2 ended up in upstream u-boot where as the u-boot-sunxi git repo got version 3. This bumps the version in upstream u-boot to version 3 of the patch: - Initialize MII clock earlier so mii access to allow independent use - Name change from WEMAC to EMAC to match mainline kernel & chip manual - Cosmetic code cleanup Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
521 lines
12 KiB
C
521 lines
12 KiB
C
/*
|
|
* sunxi_emac.c -- Allwinner A10 ethernet driver
|
|
*
|
|
* (C) Copyright 2012, Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/err.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/gpio.h>
|
|
|
|
/* EMAC register */
|
|
struct emac_regs {
|
|
u32 ctl; /* 0x00 */
|
|
u32 tx_mode; /* 0x04 */
|
|
u32 tx_flow; /* 0x08 */
|
|
u32 tx_ctl0; /* 0x0c */
|
|
u32 tx_ctl1; /* 0x10 */
|
|
u32 tx_ins; /* 0x14 */
|
|
u32 tx_pl0; /* 0x18 */
|
|
u32 tx_pl1; /* 0x1c */
|
|
u32 tx_sta; /* 0x20 */
|
|
u32 tx_io_data; /* 0x24 */
|
|
u32 tx_io_data1;/* 0x28 */
|
|
u32 tx_tsvl0; /* 0x2c */
|
|
u32 tx_tsvh0; /* 0x30 */
|
|
u32 tx_tsvl1; /* 0x34 */
|
|
u32 tx_tsvh1; /* 0x38 */
|
|
u32 rx_ctl; /* 0x3c */
|
|
u32 rx_hash0; /* 0x40 */
|
|
u32 rx_hash1; /* 0x44 */
|
|
u32 rx_sta; /* 0x48 */
|
|
u32 rx_io_data; /* 0x4c */
|
|
u32 rx_fbc; /* 0x50 */
|
|
u32 int_ctl; /* 0x54 */
|
|
u32 int_sta; /* 0x58 */
|
|
u32 mac_ctl0; /* 0x5c */
|
|
u32 mac_ctl1; /* 0x60 */
|
|
u32 mac_ipgt; /* 0x64 */
|
|
u32 mac_ipgr; /* 0x68 */
|
|
u32 mac_clrt; /* 0x6c */
|
|
u32 mac_maxf; /* 0x70 */
|
|
u32 mac_supp; /* 0x74 */
|
|
u32 mac_test; /* 0x78 */
|
|
u32 mac_mcfg; /* 0x7c */
|
|
u32 mac_mcmd; /* 0x80 */
|
|
u32 mac_madr; /* 0x84 */
|
|
u32 mac_mwtd; /* 0x88 */
|
|
u32 mac_mrdd; /* 0x8c */
|
|
u32 mac_mind; /* 0x90 */
|
|
u32 mac_ssrr; /* 0x94 */
|
|
u32 mac_a0; /* 0x98 */
|
|
u32 mac_a1; /* 0x9c */
|
|
};
|
|
|
|
/* SRAMC register */
|
|
struct sunxi_sramc_regs {
|
|
u32 ctrl0;
|
|
u32 ctrl1;
|
|
};
|
|
|
|
/* 0: Disable 1: Aborted frame enable(default) */
|
|
#define EMAC_TX_AB_M (0x1 << 0)
|
|
/* 0: CPU 1: DMA(default) */
|
|
#define EMAC_TX_TM (0x1 << 1)
|
|
|
|
#define EMAC_TX_SETUP (0)
|
|
|
|
/* 0: DRQ asserted 1: DRQ automatically(default) */
|
|
#define EMAC_RX_DRQ_MODE (0x1 << 1)
|
|
/* 0: CPU 1: DMA(default) */
|
|
#define EMAC_RX_TM (0x1 << 2)
|
|
/* 0: Normal(default) 1: Pass all Frames */
|
|
#define EMAC_RX_PA (0x1 << 4)
|
|
/* 0: Normal(default) 1: Pass Control Frames */
|
|
#define EMAC_RX_PCF (0x1 << 5)
|
|
/* 0: Normal(default) 1: Pass Frames with CRC Error */
|
|
#define EMAC_RX_PCRCE (0x1 << 6)
|
|
/* 0: Normal(default) 1: Pass Frames with Length Error */
|
|
#define EMAC_RX_PLE (0x1 << 7)
|
|
/* 0: Normal 1: Pass Frames length out of range(default) */
|
|
#define EMAC_RX_POR (0x1 << 8)
|
|
/* 0: Not accept 1: Accept unicast Packets(default) */
|
|
#define EMAC_RX_UCAD (0x1 << 16)
|
|
/* 0: Normal(default) 1: DA Filtering */
|
|
#define EMAC_RX_DAF (0x1 << 17)
|
|
/* 0: Not accept 1: Accept multicast Packets(default) */
|
|
#define EMAC_RX_MCO (0x1 << 20)
|
|
/* 0: Disable(default) 1: Enable Hash filter */
|
|
#define EMAC_RX_MHF (0x1 << 21)
|
|
/* 0: Not accept 1: Accept Broadcast Packets(default) */
|
|
#define EMAC_RX_BCO (0x1 << 22)
|
|
/* 0: Disable(default) 1: Enable SA Filtering */
|
|
#define EMAC_RX_SAF (0x1 << 24)
|
|
/* 0: Normal(default) 1: Inverse Filtering */
|
|
#define EMAC_RX_SAIF (0x1 << 25)
|
|
|
|
#define EMAC_RX_SETUP (EMAC_RX_POR | EMAC_RX_UCAD | EMAC_RX_DAF | \
|
|
EMAC_RX_MCO | EMAC_RX_BCO)
|
|
|
|
/* 0: Disable 1: Enable Receive Flow Control(default) */
|
|
#define EMAC_MAC_CTL0_RFC (0x1 << 2)
|
|
/* 0: Disable 1: Enable Transmit Flow Control(default) */
|
|
#define EMAC_MAC_CTL0_TFC (0x1 << 3)
|
|
|
|
#define EMAC_MAC_CTL0_SETUP (EMAC_MAC_CTL0_RFC | EMAC_MAC_CTL0_TFC)
|
|
|
|
/* 0: Disable 1: Enable MAC Frame Length Checking(default) */
|
|
#define EMAC_MAC_CTL1_FLC (0x1 << 1)
|
|
/* 0: Disable(default) 1: Enable Huge Frame */
|
|
#define EMAC_MAC_CTL1_HF (0x1 << 2)
|
|
/* 0: Disable(default) 1: Enable MAC Delayed CRC */
|
|
#define EMAC_MAC_CTL1_DCRC (0x1 << 3)
|
|
/* 0: Disable 1: Enable MAC CRC(default) */
|
|
#define EMAC_MAC_CTL1_CRC (0x1 << 4)
|
|
/* 0: Disable 1: Enable MAC PAD Short frames(default) */
|
|
#define EMAC_MAC_CTL1_PC (0x1 << 5)
|
|
/* 0: Disable(default) 1: Enable MAC PAD Short frames and append CRC */
|
|
#define EMAC_MAC_CTL1_VC (0x1 << 6)
|
|
/* 0: Disable(default) 1: Enable MAC auto detect Short frames */
|
|
#define EMAC_MAC_CTL1_ADP (0x1 << 7)
|
|
/* 0: Disable(default) 1: Enable */
|
|
#define EMAC_MAC_CTL1_PRE (0x1 << 8)
|
|
/* 0: Disable(default) 1: Enable */
|
|
#define EMAC_MAC_CTL1_LPE (0x1 << 9)
|
|
/* 0: Disable(default) 1: Enable no back off */
|
|
#define EMAC_MAC_CTL1_NB (0x1 << 12)
|
|
/* 0: Disable(default) 1: Enable */
|
|
#define EMAC_MAC_CTL1_BNB (0x1 << 13)
|
|
/* 0: Disable(default) 1: Enable */
|
|
#define EMAC_MAC_CTL1_ED (0x1 << 14)
|
|
|
|
#define EMAC_MAC_CTL1_SETUP (EMAC_MAC_CTL1_FLC | EMAC_MAC_CTL1_CRC | \
|
|
EMAC_MAC_CTL1_PC)
|
|
|
|
#define EMAC_MAC_IPGT 0x15
|
|
|
|
#define EMAC_MAC_NBTB_IPG1 0xc
|
|
#define EMAC_MAC_NBTB_IPG2 0x12
|
|
|
|
#define EMAC_MAC_CW 0x37
|
|
#define EMAC_MAC_RM 0xf
|
|
|
|
#define EMAC_MAC_MFL 0x0600
|
|
|
|
/* Receive status */
|
|
#define EMAC_CRCERR (0x1 << 4)
|
|
#define EMAC_LENERR (0x3 << 5)
|
|
|
|
#define DMA_CPU_TRRESHOLD 2000
|
|
|
|
struct emac_eth_dev {
|
|
u32 speed;
|
|
u32 duplex;
|
|
u32 phy_configured;
|
|
int link_printed;
|
|
};
|
|
|
|
struct emac_rxhdr {
|
|
s16 rx_len;
|
|
u16 rx_status;
|
|
};
|
|
|
|
static void emac_inblk_32bit(void *reg, void *data, int count)
|
|
{
|
|
int cnt = (count + 3) >> 2;
|
|
|
|
if (cnt) {
|
|
u32 *buf = data;
|
|
|
|
do {
|
|
u32 x = readl(reg);
|
|
*buf++ = x;
|
|
} while (--cnt);
|
|
}
|
|
}
|
|
|
|
static void emac_outblk_32bit(void *reg, void *data, int count)
|
|
{
|
|
int cnt = (count + 3) >> 2;
|
|
|
|
if (cnt) {
|
|
const u32 *buf = data;
|
|
|
|
do {
|
|
writel(*buf++, reg);
|
|
} while (--cnt);
|
|
}
|
|
}
|
|
|
|
/* Read a word from phyxcer */
|
|
static int emac_phy_read(const char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short *value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
|
|
/* issue the phy address and reg */
|
|
writel(addr << 8 | reg, ®s->mac_madr);
|
|
|
|
/* pull up the phy io line */
|
|
writel(0x1, ®s->mac_mcmd);
|
|
|
|
/* Wait read complete */
|
|
mdelay(1);
|
|
|
|
/* push down the phy io line */
|
|
writel(0x0, ®s->mac_mcmd);
|
|
|
|
/* and write data */
|
|
*value = readl(®s->mac_mrdd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write a word to phyxcer */
|
|
static int emac_phy_write(const char *devname, unsigned char addr,
|
|
unsigned char reg, unsigned short value)
|
|
{
|
|
struct eth_device *dev = eth_get_dev_by_name(devname);
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
|
|
/* issue the phy address and reg */
|
|
writel(addr << 8 | reg, ®s->mac_madr);
|
|
|
|
/* pull up the phy io line */
|
|
writel(0x1, ®s->mac_mcmd);
|
|
|
|
/* Wait write complete */
|
|
mdelay(1);
|
|
|
|
/* push down the phy io line */
|
|
writel(0x0, ®s->mac_mcmd);
|
|
|
|
/* and write data */
|
|
writel(value, ®s->mac_mwtd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void emac_setup(struct eth_device *dev)
|
|
{
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
u32 reg_val;
|
|
u16 phy_val;
|
|
u32 duplex_flag;
|
|
|
|
/* Set up TX */
|
|
writel(EMAC_TX_SETUP, ®s->tx_mode);
|
|
|
|
/* Set up RX */
|
|
writel(EMAC_RX_SETUP, ®s->rx_ctl);
|
|
|
|
/* Set MAC */
|
|
/* Set MAC CTL0 */
|
|
writel(EMAC_MAC_CTL0_SETUP, ®s->mac_ctl0);
|
|
|
|
/* Set MAC CTL1 */
|
|
emac_phy_read(dev->name, 1, 0, &phy_val);
|
|
debug("PHY SETUP, reg 0 value: %x\n", phy_val);
|
|
duplex_flag = !!(phy_val & (1 << 8));
|
|
|
|
reg_val = 0;
|
|
if (duplex_flag)
|
|
reg_val = (0x1 << 0);
|
|
writel(EMAC_MAC_CTL1_SETUP | reg_val, ®s->mac_ctl1);
|
|
|
|
/* Set up IPGT */
|
|
writel(EMAC_MAC_IPGT, ®s->mac_ipgt);
|
|
|
|
/* Set up IPGR */
|
|
writel(EMAC_MAC_NBTB_IPG2 | (EMAC_MAC_NBTB_IPG1 << 8), ®s->mac_ipgr);
|
|
|
|
/* Set up Collison window */
|
|
writel(EMAC_MAC_RM | (EMAC_MAC_CW << 8), ®s->mac_clrt);
|
|
|
|
/* Set up Max Frame Length */
|
|
writel(EMAC_MAC_MFL, ®s->mac_maxf);
|
|
}
|
|
|
|
static void emac_reset(struct eth_device *dev)
|
|
{
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
|
|
debug("resetting device\n");
|
|
|
|
/* RESET device */
|
|
writel(0, ®s->ctl);
|
|
udelay(200);
|
|
|
|
writel(1, ®s->ctl);
|
|
udelay(200);
|
|
}
|
|
|
|
static int sunxi_emac_eth_init(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
struct emac_eth_dev *priv = dev->priv;
|
|
u16 phy_reg;
|
|
|
|
/* Init EMAC */
|
|
|
|
/* Flush RX FIFO */
|
|
setbits_le32(®s->rx_ctl, 0x8);
|
|
udelay(1);
|
|
|
|
/* Init MAC */
|
|
|
|
/* Soft reset MAC */
|
|
clrbits_le32(®s->mac_ctl0, 0x1 << 15);
|
|
|
|
/* Clear RX counter */
|
|
writel(0x0, ®s->rx_fbc);
|
|
udelay(1);
|
|
|
|
/* Set up EMAC */
|
|
emac_setup(dev);
|
|
|
|
writel(dev->enetaddr[0] << 16 | dev->enetaddr[1] << 8 |
|
|
dev->enetaddr[2], ®s->mac_a1);
|
|
writel(dev->enetaddr[3] << 16 | dev->enetaddr[4] << 8 |
|
|
dev->enetaddr[5], ®s->mac_a0);
|
|
|
|
mdelay(1);
|
|
|
|
emac_reset(dev);
|
|
|
|
/* PHY POWER UP */
|
|
emac_phy_read(dev->name, 1, 0, &phy_reg);
|
|
emac_phy_write(dev->name, 1, 0, phy_reg & (~(0x1 << 11)));
|
|
mdelay(1);
|
|
|
|
emac_phy_read(dev->name, 1, 0, &phy_reg);
|
|
|
|
priv->speed = miiphy_speed(dev->name, 0);
|
|
priv->duplex = miiphy_duplex(dev->name, 0);
|
|
|
|
/* Print link status only once */
|
|
if (!priv->link_printed) {
|
|
printf("ENET Speed is %d Mbps - %s duplex connection\n",
|
|
priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL");
|
|
priv->link_printed = 1;
|
|
}
|
|
|
|
/* Set EMAC SPEED depend on PHY */
|
|
clrsetbits_le32(®s->mac_supp, 1 << 8,
|
|
((phy_reg & (0x1 << 13)) >> 13) << 8);
|
|
|
|
/* Set duplex depend on phy */
|
|
clrsetbits_le32(®s->mac_ctl1, 1 << 0,
|
|
((phy_reg & (0x1 << 8)) >> 8) << 0);
|
|
|
|
/* Enable RX/TX */
|
|
setbits_le32(®s->ctl, 0x7);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sunxi_emac_eth_halt(struct eth_device *dev)
|
|
{
|
|
/* Nothing to do here */
|
|
}
|
|
|
|
static int sunxi_emac_eth_recv(struct eth_device *dev)
|
|
{
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
struct emac_rxhdr rxhdr;
|
|
u32 rxcount;
|
|
u32 reg_val;
|
|
int rx_len;
|
|
int rx_status;
|
|
int good_packet;
|
|
|
|
/* Check packet ready or not */
|
|
|
|
/* Race warning: The first packet might arrive with
|
|
* the interrupts disabled, but the second will fix
|
|
*/
|
|
rxcount = readl(®s->rx_fbc);
|
|
if (!rxcount) {
|
|
/* Had one stuck? */
|
|
rxcount = readl(®s->rx_fbc);
|
|
if (!rxcount)
|
|
return 0;
|
|
}
|
|
|
|
reg_val = readl(®s->rx_io_data);
|
|
if (reg_val != 0x0143414d) {
|
|
/* Disable RX */
|
|
clrbits_le32(®s->ctl, 0x1 << 2);
|
|
|
|
/* Flush RX FIFO */
|
|
setbits_le32(®s->rx_ctl, 0x1 << 3);
|
|
while (readl(®s->rx_ctl) & (0x1 << 3))
|
|
;
|
|
|
|
/* Enable RX */
|
|
setbits_le32(®s->ctl, 0x1 << 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* A packet ready now
|
|
* Get status/length
|
|
*/
|
|
good_packet = 1;
|
|
|
|
emac_inblk_32bit(®s->rx_io_data, &rxhdr, sizeof(rxhdr));
|
|
|
|
rx_len = rxhdr.rx_len;
|
|
rx_status = rxhdr.rx_status;
|
|
|
|
/* Packet Status check */
|
|
if (rx_len < 0x40) {
|
|
good_packet = 0;
|
|
debug("RX: Bad Packet (runt)\n");
|
|
}
|
|
|
|
/* rx_status is identical to RSR register. */
|
|
if (0 & rx_status & (EMAC_CRCERR | EMAC_LENERR)) {
|
|
good_packet = 0;
|
|
if (rx_status & EMAC_CRCERR)
|
|
printf("crc error\n");
|
|
if (rx_status & EMAC_LENERR)
|
|
printf("length error\n");
|
|
}
|
|
|
|
/* Move data from EMAC */
|
|
if (good_packet) {
|
|
if (rx_len > DMA_CPU_TRRESHOLD) {
|
|
printf("Received packet is too big (len=%d)\n", rx_len);
|
|
} else {
|
|
emac_inblk_32bit((void *)®s->rx_io_data,
|
|
NetRxPackets[0], rx_len);
|
|
|
|
/* Pass to upper layer */
|
|
NetReceive(NetRxPackets[0], rx_len);
|
|
return rx_len;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_emac_eth_send(struct eth_device *dev, void *packet, int len)
|
|
{
|
|
struct emac_regs *regs = (struct emac_regs *)dev->iobase;
|
|
|
|
/* Select channel 0 */
|
|
writel(0, ®s->tx_ins);
|
|
|
|
/* Write packet */
|
|
emac_outblk_32bit((void *)®s->tx_io_data, packet, len);
|
|
|
|
/* Set TX len */
|
|
writel(len, ®s->tx_pl0);
|
|
|
|
/* Start translate from fifo to phy */
|
|
setbits_le32(®s->tx_ctl0, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sunxi_emac_initialize(void)
|
|
{
|
|
struct sunxi_ccm_reg *const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
struct sunxi_sramc_regs *sram =
|
|
(struct sunxi_sramc_regs *)SUNXI_SRAMC_BASE;
|
|
struct emac_regs *regs =
|
|
(struct emac_regs *)SUNXI_EMAC_BASE;
|
|
struct eth_device *dev;
|
|
struct emac_eth_dev *priv;
|
|
int pin;
|
|
|
|
dev = malloc(sizeof(*dev));
|
|
if (dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
priv = (struct emac_eth_dev *)malloc(sizeof(struct emac_eth_dev));
|
|
if (!priv) {
|
|
free(dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
memset(priv, 0, sizeof(struct emac_eth_dev));
|
|
|
|
/* Map SRAM to EMAC */
|
|
setbits_le32(&sram->ctrl1, 0x5 << 2);
|
|
|
|
/* Configure pin mux settings for MII Ethernet */
|
|
for (pin = SUNXI_GPA(0); pin <= SUNXI_GPA(17); pin++)
|
|
sunxi_gpio_set_cfgpin(pin, SUNXI_GPA0_EMAC);
|
|
|
|
/* Set up clock gating */
|
|
setbits_le32(&ccm->ahb_gate0, 0x1 << AHB_GATE_OFFSET_EMAC);
|
|
|
|
/* Set MII clock */
|
|
clrsetbits_le32(®s->mac_mcfg, 0xf << 2, 0xd << 2);
|
|
|
|
dev->iobase = (int)regs;
|
|
dev->priv = priv;
|
|
dev->init = sunxi_emac_eth_init;
|
|
dev->halt = sunxi_emac_eth_halt;
|
|
dev->send = sunxi_emac_eth_send;
|
|
dev->recv = sunxi_emac_eth_recv;
|
|
strcpy(dev->name, "emac");
|
|
|
|
eth_register(dev);
|
|
|
|
miiphy_register(dev->name, emac_phy_read, emac_phy_write);
|
|
|
|
return 0;
|
|
}
|