mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
5e8397dd94
The u-boot environment is redundantly stored in a NOR flash on our boards. Redundant means that there are two places to store the environment. But only one of the two is active. I discovered that on one board the u-boot (env_sf) uses the environment from the second place and the Kernel (fw_printenv) uses the environment from the first place. To decide which is the active environment there is a byte inside the environment. 1 means active and 0 means obsolete. But on that board both environments had have a 1. This can happen if a power loss or reset occurs during writing the environment. In this situation the u-boot (env_sf) implementation uses the second environment as default. But the Kernel (fw_printenv) implementation uses the first environment as default. This commit corrects the default in the u-boot env_sf implementation when a problem was detected. Now the recovery default is the same like in all other environment implementations. E.g. fw_printenv and env_flash. This ensures that u-boot and Kernel use the same environment. Signed-off-by: Mario Schuknecht <mario.schuknecht@dresearch-fe.de>
333 lines
7.1 KiB
C
333 lines
7.1 KiB
C
/*
|
|
* (C) Copyright 2000-2010
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Andreas Heppel <aheppel@sysgo.de>
|
|
*
|
|
* (C) Copyright 2008 Atmel Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <malloc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <search.h>
|
|
#include <errno.h>
|
|
|
|
#ifndef CONFIG_ENV_SPI_BUS
|
|
# define CONFIG_ENV_SPI_BUS 0
|
|
#endif
|
|
#ifndef CONFIG_ENV_SPI_CS
|
|
# define CONFIG_ENV_SPI_CS 0
|
|
#endif
|
|
#ifndef CONFIG_ENV_SPI_MAX_HZ
|
|
# define CONFIG_ENV_SPI_MAX_HZ 1000000
|
|
#endif
|
|
#ifndef CONFIG_ENV_SPI_MODE
|
|
# define CONFIG_ENV_SPI_MODE SPI_MODE_3
|
|
#endif
|
|
|
|
#ifdef CONFIG_ENV_OFFSET_REDUND
|
|
static ulong env_offset = CONFIG_ENV_OFFSET;
|
|
static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
|
|
#define ACTIVE_FLAG 1
|
|
#define OBSOLETE_FLAG 0
|
|
#endif /* CONFIG_ENV_OFFSET_REDUND */
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
char *env_name_spec = "SPI Flash";
|
|
|
|
static struct spi_flash *env_flash;
|
|
|
|
#if defined(CONFIG_ENV_OFFSET_REDUND)
|
|
int saveenv(void)
|
|
{
|
|
env_t env_new;
|
|
char *saved_buffer = NULL, flag = OBSOLETE_FLAG;
|
|
u32 saved_size, saved_offset, sector = 1;
|
|
int ret;
|
|
|
|
if (!env_flash) {
|
|
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
|
|
CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
|
|
if (!env_flash) {
|
|
set_default_env("!spi_flash_probe() failed");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
ret = env_export(&env_new);
|
|
if (ret)
|
|
return ret;
|
|
env_new.flags = ACTIVE_FLAG;
|
|
|
|
if (gd->env_valid == 1) {
|
|
env_new_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
env_offset = CONFIG_ENV_OFFSET;
|
|
} else {
|
|
env_new_offset = CONFIG_ENV_OFFSET;
|
|
env_offset = CONFIG_ENV_OFFSET_REDUND;
|
|
}
|
|
|
|
/* Is the sector larger than the env (i.e. embedded) */
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
|
|
saved_offset = env_new_offset + CONFIG_ENV_SIZE;
|
|
saved_buffer = malloc(saved_size);
|
|
if (!saved_buffer) {
|
|
ret = 1;
|
|
goto done;
|
|
}
|
|
ret = spi_flash_read(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
if (CONFIG_ENV_SIZE > CONFIG_ENV_SECT_SIZE) {
|
|
sector = CONFIG_ENV_SIZE / CONFIG_ENV_SECT_SIZE;
|
|
if (CONFIG_ENV_SIZE % CONFIG_ENV_SECT_SIZE)
|
|
sector++;
|
|
}
|
|
|
|
puts("Erasing SPI flash...");
|
|
ret = spi_flash_erase(env_flash, env_new_offset,
|
|
sector * CONFIG_ENV_SECT_SIZE);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("Writing to SPI flash...");
|
|
|
|
ret = spi_flash_write(env_flash, env_new_offset,
|
|
CONFIG_ENV_SIZE, &env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
ret = spi_flash_write(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
ret = spi_flash_write(env_flash, env_offset + offsetof(env_t, flags),
|
|
sizeof(env_new.flags), &flag);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("done\n");
|
|
|
|
gd->env_valid = gd->env_valid == 2 ? 1 : 2;
|
|
|
|
printf("Valid environment: %d\n", (int)gd->env_valid);
|
|
|
|
done:
|
|
if (saved_buffer)
|
|
free(saved_buffer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void env_relocate_spec(void)
|
|
{
|
|
int ret;
|
|
int crc1_ok = 0, crc2_ok = 0;
|
|
env_t *tmp_env1 = NULL;
|
|
env_t *tmp_env2 = NULL;
|
|
env_t *ep = NULL;
|
|
|
|
tmp_env1 = (env_t *)malloc(CONFIG_ENV_SIZE);
|
|
tmp_env2 = (env_t *)malloc(CONFIG_ENV_SIZE);
|
|
|
|
if (!tmp_env1 || !tmp_env2) {
|
|
set_default_env("!malloc() failed");
|
|
goto out;
|
|
}
|
|
|
|
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
|
|
if (!env_flash) {
|
|
set_default_env("!spi_flash_probe() failed");
|
|
goto out;
|
|
}
|
|
|
|
ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET,
|
|
CONFIG_ENV_SIZE, tmp_env1);
|
|
if (ret) {
|
|
set_default_env("!spi_flash_read() failed");
|
|
goto err_read;
|
|
}
|
|
|
|
if (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc)
|
|
crc1_ok = 1;
|
|
|
|
ret = spi_flash_read(env_flash, CONFIG_ENV_OFFSET_REDUND,
|
|
CONFIG_ENV_SIZE, tmp_env2);
|
|
if (!ret) {
|
|
if (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc)
|
|
crc2_ok = 1;
|
|
}
|
|
|
|
if (!crc1_ok && !crc2_ok) {
|
|
set_default_env("!bad CRC");
|
|
goto err_read;
|
|
} else if (crc1_ok && !crc2_ok) {
|
|
gd->env_valid = 1;
|
|
} else if (!crc1_ok && crc2_ok) {
|
|
gd->env_valid = 2;
|
|
} else if (tmp_env1->flags == ACTIVE_FLAG &&
|
|
tmp_env2->flags == OBSOLETE_FLAG) {
|
|
gd->env_valid = 1;
|
|
} else if (tmp_env1->flags == OBSOLETE_FLAG &&
|
|
tmp_env2->flags == ACTIVE_FLAG) {
|
|
gd->env_valid = 2;
|
|
} else if (tmp_env1->flags == tmp_env2->flags) {
|
|
gd->env_valid = 1;
|
|
} else if (tmp_env1->flags == 0xFF) {
|
|
gd->env_valid = 1;
|
|
} else if (tmp_env2->flags == 0xFF) {
|
|
gd->env_valid = 2;
|
|
} else {
|
|
/*
|
|
* this differs from code in env_flash.c, but I think a sane
|
|
* default path is desirable.
|
|
*/
|
|
gd->env_valid = 1;
|
|
}
|
|
|
|
if (gd->env_valid == 1)
|
|
ep = tmp_env1;
|
|
else
|
|
ep = tmp_env2;
|
|
|
|
ret = env_import((char *)ep, 0);
|
|
if (!ret) {
|
|
error("Cannot import environment: errno = %d\n", errno);
|
|
set_default_env("env_import failed");
|
|
}
|
|
|
|
err_read:
|
|
spi_flash_free(env_flash);
|
|
env_flash = NULL;
|
|
out:
|
|
free(tmp_env1);
|
|
free(tmp_env2);
|
|
}
|
|
#else
|
|
int saveenv(void)
|
|
{
|
|
u32 saved_size, saved_offset, sector = 1;
|
|
char *saved_buffer = NULL;
|
|
int ret = 1;
|
|
env_t env_new;
|
|
|
|
if (!env_flash) {
|
|
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
|
|
CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
|
|
if (!env_flash) {
|
|
set_default_env("!spi_flash_probe() failed");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* Is the sector larger than the env (i.e. embedded) */
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
|
|
saved_offset = CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE;
|
|
saved_buffer = malloc(saved_size);
|
|
if (!saved_buffer)
|
|
goto done;
|
|
|
|
ret = spi_flash_read(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
if (CONFIG_ENV_SIZE > CONFIG_ENV_SECT_SIZE) {
|
|
sector = CONFIG_ENV_SIZE / CONFIG_ENV_SECT_SIZE;
|
|
if (CONFIG_ENV_SIZE % CONFIG_ENV_SECT_SIZE)
|
|
sector++;
|
|
}
|
|
|
|
ret = env_export(&env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("Erasing SPI flash...");
|
|
ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET,
|
|
sector * CONFIG_ENV_SECT_SIZE);
|
|
if (ret)
|
|
goto done;
|
|
|
|
puts("Writing to SPI flash...");
|
|
ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET,
|
|
CONFIG_ENV_SIZE, &env_new);
|
|
if (ret)
|
|
goto done;
|
|
|
|
if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
|
|
ret = spi_flash_write(env_flash, saved_offset,
|
|
saved_size, saved_buffer);
|
|
if (ret)
|
|
goto done;
|
|
}
|
|
|
|
ret = 0;
|
|
puts("done\n");
|
|
|
|
done:
|
|
if (saved_buffer)
|
|
free(saved_buffer);
|
|
|
|
return ret;
|
|
}
|
|
|
|
void env_relocate_spec(void)
|
|
{
|
|
int ret;
|
|
char *buf = NULL;
|
|
|
|
buf = (char *)malloc(CONFIG_ENV_SIZE);
|
|
env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS, CONFIG_ENV_SPI_CS,
|
|
CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
|
|
if (!env_flash) {
|
|
set_default_env("!spi_flash_probe() failed");
|
|
if (buf)
|
|
free(buf);
|
|
return;
|
|
}
|
|
|
|
ret = spi_flash_read(env_flash,
|
|
CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, buf);
|
|
if (ret) {
|
|
set_default_env("!spi_flash_read() failed");
|
|
goto out;
|
|
}
|
|
|
|
ret = env_import(buf, 1);
|
|
if (ret)
|
|
gd->env_valid = 1;
|
|
out:
|
|
spi_flash_free(env_flash);
|
|
if (buf)
|
|
free(buf);
|
|
env_flash = NULL;
|
|
}
|
|
#endif
|
|
|
|
int env_init(void)
|
|
{
|
|
/* SPI flash isn't usable before relocation */
|
|
gd->env_addr = (ulong)&default_environment[0];
|
|
gd->env_valid = 1;
|
|
|
|
return 0;
|
|
}
|