u-boot/common/spl/Makefile
Stefan Agner a3774c1c3c spl: add serial download protocol (SDP) support
Add USB serial download protocol support to SPL. If the SoC started
in recovery mode the SPL will immediately switch to SDP and wait for
further downloads/commands from the host side.

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Łukasz Majewski <lukma@denx.de>
2017-08-23 10:41:58 +02:00

34 lines
1.2 KiB
Makefile

#
# (C) Copyright 2012
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
# Based on common/Makefile.
#
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_FRAMEWORK) += spl.o
obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o
obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o
ifndef CONFIG_SPL_UBI
obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o
obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o
endif
obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o
obj-$(CONFIG_$(SPL_TPL_)NET_SUPPORT) += spl_net.o
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += spl_mmc.o
obj-$(CONFIG_$(SPL_TPL_)ATF_SUPPORT) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
obj-$(CONFIG_$(SPL_TPL_)DFU_SUPPORT) += spl_dfu.o
obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
endif