u-boot/board/mpc8540eval/mpc8540eval.c
Jon Loeliger a30a549a35 Remove erroneous or extra spd.h #includers.
Many of the spd.h #includers don't need it,
and wanted to have spd_sdram() declared instead.
Since they didn't get that, some also had open
coded extern declarations of it instead or as well.
Fix it all up by using spd_sdram.h where needed.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
2008-03-05 00:17:43 +01:00

245 lines
6.3 KiB
C

/*
* (C) Copyright 2002,2003, Motorola Inc.
* Xianghua Xiao, (X.Xiao@motorola.com)
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/immap_85xx.h>
#include <spd_sdram.h>
long int fixed_sdram (void);
int board_pre_init (void)
{
#if defined(CONFIG_PCI)
volatile ccsr_pcix_t *pci = (void *)(CFG_MPC85xx_PCIX_ADDR);
pci->peer &= 0xffffffdf; /* disable master abort */
#endif
return 0;
}
int checkboard (void)
{
sys_info_t sysinfo;
get_sys_info (&sysinfo);
printf ("Board: Freescale MPC8540EVAL Board\n");
printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf ("\tCCB: %lu MHz\n", sysinfo.freqSystemBus / 1000000);
printf ("\tDDR: %lu MHz\n", sysinfo.freqSystemBus / 2000000);
if((CFG_LBC_LCRR & 0x0f) == 2 || (CFG_LBC_LCRR & 0x0f) == 4 \
|| (CFG_LBC_LCRR & 0x0f) == 8) {
printf ("\tLBC: %lu MHz\n",
sysinfo.freqSystemBus / 1000000/(CFG_LBC_LCRR & 0x0f));
} else {
printf("\tLBC: unknown\n");
}
printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
return (0);
}
long int initdram (int board_type)
{
long dram_size = 0;
#if !defined(CONFIG_RAM_AS_FLASH)
volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
sys_info_t sysinfo;
uint temp_lbcdll = 0;
#endif
#if !defined(CONFIG_RAM_AS_FLASH) || defined(CONFIG_DDR_DLL)
volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
#endif
#if defined(CONFIG_DDR_DLL)
uint temp_ddrdll = 0;
/* Work around to stabilize DDR DLL */
temp_ddrdll = gur->ddrdllcr;
gur->ddrdllcr = ((temp_ddrdll & 0xff) << 16) | 0x80000000;
asm("sync;isync;msync");
#endif
#if defined(CONFIG_SPD_EEPROM)
dram_size = spd_sdram ();
#else
dram_size = fixed_sdram ();
#endif
#if defined(CFG_RAMBOOT)
return dram_size;
#endif
#if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
get_sys_info(&sysinfo);
/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
if(sysinfo.freqSystemBus/(CFG_LBC_LCRR & 0x0f) < 66000000) {
lbc->lcrr = (CFG_LBC_LCRR & 0x0fffffff)| 0x80000000;
} else {
lbc->lcrr = CFG_LBC_LCRR & 0x7fffffff;
udelay(200);
temp_lbcdll = gur->lbcdllcr;
gur->lbcdllcr = ((temp_lbcdll & 0xff) << 16 ) | 0x80000000;
asm("sync;isync;msync");
}
lbc->or2 = CFG_OR2_PRELIM; /* 64MB SDRAM */
lbc->br2 = CFG_BR2_PRELIM;
lbc->lbcr = CFG_LBC_LBCR;
lbc->lsdmr = CFG_LBC_LSDMR_1;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CFG_LBC_LSDMR_2;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CFG_LBC_LSDMR_3;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CFG_LBC_LSDMR_4;
asm("sync");
* (ulong *)0 = 0x000000ff;
lbc->lsdmr = CFG_LBC_LSDMR_5;
asm("sync");
lbc->lsrt = CFG_LBC_LSRT;
asm("sync");
lbc->mrtpr = CFG_LBC_MRTPR;
asm("sync");
#endif
#if defined(CONFIG_DDR_ECC)
{
/* Initialize all of memory for ECC, then
* enable errors */
uint *p = 0;
uint i = 0;
volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
dma_init();
for (*p = 0; p < (uint *)(8 * 1024); p++) {
if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
*p = (unsigned int)0xdeadbeef;
if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
}
/* 8K */
dma_xfer((uint *)0x2000,0x2000,(uint *)0);
/* 16K */
dma_xfer((uint *)0x4000,0x4000,(uint *)0);
/* 32K */
dma_xfer((uint *)0x8000,0x8000,(uint *)0);
/* 64K */
dma_xfer((uint *)0x10000,0x10000,(uint *)0);
/* 128k */
dma_xfer((uint *)0x20000,0x20000,(uint *)0);
/* 256k */
dma_xfer((uint *)0x40000,0x40000,(uint *)0);
/* 512k */
dma_xfer((uint *)0x80000,0x80000,(uint *)0);
/* 1M */
dma_xfer((uint *)0x100000,0x100000,(uint *)0);
/* 2M */
dma_xfer((uint *)0x200000,0x200000,(uint *)0);
/* 4M */
dma_xfer((uint *)0x400000,0x400000,(uint *)0);
for (i = 1; i < dram_size / 0x800000; i++) {
dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
}
/* Enable errors for ECC */
ddr->err_disable = 0x00000000;
asm("sync;isync;msync");
}
#endif
return dram_size;
}
#if defined(CFG_DRAM_TEST)
int testdram (void)
{
uint *pstart = (uint *) CFG_MEMTEST_START;
uint *pend = (uint *) CFG_MEMTEST_END;
uint *p;
printf("SDRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
*p = 0xaaaaaaaa;
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("SDRAM test phase 2:\n");
for (p = pstart; p < pend; p++)
*p = 0x55555555;
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
printf ("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
printf("SDRAM test passed.\n");
return 0;
}
#endif
#if !defined(CONFIG_SPD_EEPROM)
/*************************************************************************
* fixed sdram init -- doesn't use serial presence detect.
************************************************************************/
long int fixed_sdram (void)
{
#ifndef CFG_RAMBOOT
volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR);
ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
ddr->cs0_config = CFG_DDR_CS0_CONFIG;
ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
ddr->sdram_mode = CFG_DDR_MODE;
ddr->sdram_interval = CFG_DDR_INTERVAL;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000000D;
ddr->err_sbe = 0x00ff0000;
#endif
asm("sync;isync;msync");
udelay(500);
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
ddr->sdram_cfg = (CFG_DDR_CONTROL | 0x20000000);
#else
ddr->sdram_cfg = CFG_DDR_CONTROL;
#endif
asm("sync; isync; msync");
udelay(500);
#endif
return (CFG_SDRAM_SIZE * 1024 * 1024);
}
#endif /* !defined(CONFIG_SPD_EEPROM) */