u-boot/configs/SBx81LIFKW_defconfig
Chris Packham 54e3316ffa ARM: kirkwood: SBx81LIFKW: Enable network hardware
The SBx81LIFKW boards connect to the internal chassis management network
via a Marvell 88e6097 L2 switch. The chassis connections are direct
serdes on ports 8 and 9 with a RGMII interface on port 10 connected to
the CPU MAC.

For debugging purposes ports 0 and 1 are also taken out to headers on
the board. Because the debug interfaces are sometimes connected to with
straight ribbon cables we need to run them at 10Mbps.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
2018-06-05 07:29:09 +02:00

39 lines
931 B
Text

CONFIG_ARM=y
CONFIG_KIRKWOOD=y
CONFIG_SYS_TEXT_BASE=0x00600000
CONFIG_TARGET_SBx81LIFKW=y
CONFIG_IDENT_STRING="\nSBx81LIFKW"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifkw"
# CONFIG_SYS_MALLOC_F is not set
CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_I2C=y
CONFIG_CMD_SF=y
CONFIG_CMD_DHCP=y
CONFIG_BOOTP_NTPSERVER=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_OF_CONTROL=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_DM=y
CONFIG_DM_GPIO=y
CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_MVTWSI=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
# CONFIG_MMC is not set
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_STMICRO=y
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
CONFIG_PHYLIB=y
CONFIG_MV88E61XX_SWITCH=y
CONFIG_MV88E61XX_CPU_PORT=10
CONFIG_MV88E61XX_PHY_PORTS=0x003
CONFIG_MV88E61XX_FIXED_PORTS=0x300
CONFIG_SPI=y
CONFIG_KIRKWOOD_SPI=y