u-boot/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
Ahmed Mansour 44262327aa drivers/misc: Share qbman init between archs
This patch adds changes necessary to move functionality present in
PowerPC folders with ARM architectures that have DPAA1 QBMan hardware

- Create new board/freescale/common/fsl_portals.c to house shared
  device tree fixups for DPAA1 devices with ARM and PowerPC cores
- Add new header file to top includes directory to allow files in
  both architectures to grab the function prototypes
- Port inhibit_portals() from PowerPC to ARM. This function is used in
  setup to disable interrupts on all QMan and BMan portals. It is
  needed because the interrupts are enabled by default for all portals
  including unused/uninitialised portals. When the kernel attempts to
  go to deep sleep the unused portals prevent it from doing so

Signed-off-by: Ahmed Mansour <ahmed.mansour@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2018-01-10 12:28:47 -08:00

945 lines
23 KiB
C

/*
* Copyright 2017 NXP
* Copyright 2014-2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <asm/system.h>
#include <asm/armv8/mmu.h>
#include <asm/io.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
#include <asm/arch/cpu.h>
#include <asm/arch/speed.h>
#include <fsl_immap.h>
#include <asm/arch/mp.h>
#include <efi_loader.h>
#include <fm_eth.h>
#include <fsl-mc/fsl_mc.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
#endif
#include <asm/armv8/sec_firmware.h>
#ifdef CONFIG_SYS_FSL_DDR
#include <fsl_ddr.h>
#endif
#include <asm/arch/clock.h>
#include <hwconfig.h>
#include <fsl_qbman.h>
DECLARE_GLOBAL_DATA_PTR;
struct mm_region *mem_map = early_map;
void cpu_name(char *name)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
unsigned int i, svr, ver;
svr = gur_in32(&gur->svr);
ver = SVR_SOC_VER(svr);
for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
if ((cpu_type_list[i].soc_ver & SVR_WO_E) == ver) {
strcpy(name, cpu_type_list[i].name);
if (IS_E_PROCESSOR(svr))
strcat(name, "E");
sprintf(name + strlen(name), " Rev%d.%d",
SVR_MAJ(svr), SVR_MIN(svr));
break;
}
if (i == ARRAY_SIZE(cpu_type_list))
strcpy(name, "unknown");
}
#ifndef CONFIG_SYS_DCACHE_OFF
/*
* To start MMU before DDR is available, we create MMU table in SRAM.
* The base address of SRAM is CONFIG_SYS_FSL_OCRAM_BASE. We use three
* levels of translation tables here to cover 40-bit address space.
* We use 4KB granule size, with 40 bits physical address, T0SZ=24
* Address above EARLY_PGTABLE_SIZE (0x5000) is free for other purpose.
* Note, the debug print in cache_v8.c is not usable for debugging
* these early MMU tables because UART is not yet available.
*/
static inline void early_mmu_setup(void)
{
unsigned int el = current_el();
/* global data is already setup, no allocation yet */
gd->arch.tlb_addr = CONFIG_SYS_FSL_OCRAM_BASE;
gd->arch.tlb_fillptr = gd->arch.tlb_addr;
gd->arch.tlb_size = EARLY_PGTABLE_SIZE;
/* Create early page tables */
setup_pgtables();
/* point TTBR to the new table */
set_ttbr_tcr_mair(el, gd->arch.tlb_addr,
get_tcr(el, NULL, NULL) &
~(TCR_ORGN_MASK | TCR_IRGN_MASK),
MEMORY_ATTRIBUTES);
set_sctlr(get_sctlr() | CR_M);
}
static void fix_pcie_mmu_map(void)
{
#ifdef CONFIG_ARCH_LS2080A
unsigned int i;
u32 svr, ver;
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
svr = gur_in32(&gur->svr);
ver = SVR_SOC_VER(svr);
/* Fix PCIE base and size for LS2088A */
if ((ver == SVR_LS2088A) || (ver == SVR_LS2084A) ||
(ver == SVR_LS2048A) || (ver == SVR_LS2044A) ||
(ver == SVR_LS2081A) || (ver == SVR_LS2041A)) {
for (i = 0; i < ARRAY_SIZE(final_map); i++) {
switch (final_map[i].phys) {
case CONFIG_SYS_PCIE1_PHYS_ADDR:
final_map[i].phys = 0x2000000000ULL;
final_map[i].virt = 0x2000000000ULL;
final_map[i].size = 0x800000000ULL;
break;
case CONFIG_SYS_PCIE2_PHYS_ADDR:
final_map[i].phys = 0x2800000000ULL;
final_map[i].virt = 0x2800000000ULL;
final_map[i].size = 0x800000000ULL;
break;
case CONFIG_SYS_PCIE3_PHYS_ADDR:
final_map[i].phys = 0x3000000000ULL;
final_map[i].virt = 0x3000000000ULL;
final_map[i].size = 0x800000000ULL;
break;
case CONFIG_SYS_PCIE4_PHYS_ADDR:
final_map[i].phys = 0x3800000000ULL;
final_map[i].virt = 0x3800000000ULL;
final_map[i].size = 0x800000000ULL;
break;
default:
break;
}
}
}
#endif
}
/*
* The final tables look similar to early tables, but different in detail.
* These tables are in DRAM. Sub tables are added to enable cache for
* QBMan and OCRAM.
*
* Put the MMU table in secure memory if gd->arch.secure_ram is valid.
* OCRAM will be not used for this purpose so gd->arch.secure_ram can't be 0.
*/
static inline void final_mmu_setup(void)
{
u64 tlb_addr_save = gd->arch.tlb_addr;
unsigned int el = current_el();
int index;
/* fix the final_map before filling in the block entries */
fix_pcie_mmu_map();
mem_map = final_map;
/* Update mapping for DDR to actual size */
for (index = 0; index < ARRAY_SIZE(final_map) - 2; index++) {
/*
* Find the entry for DDR mapping and update the address and
* size. Zero-sized mapping will be skipped when creating MMU
* table.
*/
switch (final_map[index].virt) {
case CONFIG_SYS_FSL_DRAM_BASE1:
final_map[index].virt = gd->bd->bi_dram[0].start;
final_map[index].phys = gd->bd->bi_dram[0].start;
final_map[index].size = gd->bd->bi_dram[0].size;
break;
#ifdef CONFIG_SYS_FSL_DRAM_BASE2
case CONFIG_SYS_FSL_DRAM_BASE2:
#if (CONFIG_NR_DRAM_BANKS >= 2)
final_map[index].virt = gd->bd->bi_dram[1].start;
final_map[index].phys = gd->bd->bi_dram[1].start;
final_map[index].size = gd->bd->bi_dram[1].size;
#else
final_map[index].size = 0;
#endif
break;
#endif
#ifdef CONFIG_SYS_FSL_DRAM_BASE3
case CONFIG_SYS_FSL_DRAM_BASE3:
#if (CONFIG_NR_DRAM_BANKS >= 3)
final_map[index].virt = gd->bd->bi_dram[2].start;
final_map[index].phys = gd->bd->bi_dram[2].start;
final_map[index].size = gd->bd->bi_dram[2].size;
#else
final_map[index].size = 0;
#endif
break;
#endif
default:
break;
}
}
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
if (el == 3) {
/*
* Only use gd->arch.secure_ram if the address is
* recalculated. Align to 4KB for MMU table.
*/
/* put page tables in secure ram */
index = ARRAY_SIZE(final_map) - 2;
gd->arch.tlb_addr = gd->arch.secure_ram & ~0xfff;
final_map[index].virt = gd->arch.secure_ram & ~0x3;
final_map[index].phys = final_map[index].virt;
final_map[index].size = CONFIG_SYS_MEM_RESERVE_SECURE;
final_map[index].attrs = PTE_BLOCK_OUTER_SHARE;
gd->arch.secure_ram |= MEM_RESERVE_SECURE_SECURED;
tlb_addr_save = gd->arch.tlb_addr;
} else {
/* Use allocated (board_f.c) memory for TLB */
tlb_addr_save = gd->arch.tlb_allocated;
gd->arch.tlb_addr = tlb_addr_save;
}
}
#endif
/* Reset the fill ptr */
gd->arch.tlb_fillptr = tlb_addr_save;
/* Create normal system page tables */
setup_pgtables();
/* Create emergency page tables */
gd->arch.tlb_addr = gd->arch.tlb_fillptr;
gd->arch.tlb_emerg = gd->arch.tlb_addr;
setup_pgtables();
gd->arch.tlb_addr = tlb_addr_save;
/* Disable cache and MMU */
dcache_disable(); /* TLBs are invalidated */
invalidate_icache_all();
/* point TTBR to the new table */
set_ttbr_tcr_mair(el, gd->arch.tlb_addr, get_tcr(el, NULL, NULL),
MEMORY_ATTRIBUTES);
set_sctlr(get_sctlr() | CR_M);
}
u64 get_page_table_size(void)
{
return 0x10000;
}
int arch_cpu_init(void)
{
/*
* This function is called before U-Boot relocates itself to speed up
* on system running. It is not necessary to run if performance is not
* critical. Skip if MMU is already enabled by SPL or other means.
*/
if (get_sctlr() & CR_M)
return 0;
icache_enable();
__asm_invalidate_dcache_all();
__asm_invalidate_tlb_all();
early_mmu_setup();
set_sctlr(get_sctlr() | CR_C);
return 0;
}
void mmu_setup(void)
{
final_mmu_setup();
}
/*
* This function is called from common/board_r.c.
* It recreates MMU table in main memory.
*/
void enable_caches(void)
{
mmu_setup();
__asm_invalidate_tlb_all();
icache_enable();
dcache_enable();
}
#endif
u32 initiator_type(u32 cluster, int init_id)
{
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 idx = (cluster >> (init_id * 8)) & TP_CLUSTER_INIT_MASK;
u32 type = 0;
type = gur_in32(&gur->tp_ityp[idx]);
if (type & TP_ITYP_AV)
return type;
return 0;
}
u32 cpu_pos_mask(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
int i = 0;
u32 cluster, type, mask = 0;
do {
int j;
cluster = gur_in32(&gur->tp_cluster[i].lower);
for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
type = initiator_type(cluster, j);
if (type && (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM))
mask |= 1 << (i * TP_INIT_PER_CLUSTER + j);
}
i++;
} while ((cluster & TP_CLUSTER_EOC) == 0x0);
return mask;
}
u32 cpu_mask(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
int i = 0, count = 0;
u32 cluster, type, mask = 0;
do {
int j;
cluster = gur_in32(&gur->tp_cluster[i].lower);
for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
type = initiator_type(cluster, j);
if (type) {
if (TP_ITYP_TYPE(type) == TP_ITYP_TYPE_ARM)
mask |= 1 << count;
count++;
}
}
i++;
} while ((cluster & TP_CLUSTER_EOC) == 0x0);
return mask;
}
/*
* Return the number of cores on this SOC.
*/
int cpu_numcores(void)
{
return hweight32(cpu_mask());
}
int fsl_qoriq_core_to_cluster(unsigned int core)
{
struct ccsr_gur __iomem *gur =
(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
int i = 0, count = 0;
u32 cluster;
do {
int j;
cluster = gur_in32(&gur->tp_cluster[i].lower);
for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
if (initiator_type(cluster, j)) {
if (count == core)
return i;
count++;
}
}
i++;
} while ((cluster & TP_CLUSTER_EOC) == 0x0);
return -1; /* cannot identify the cluster */
}
u32 fsl_qoriq_core_to_type(unsigned int core)
{
struct ccsr_gur __iomem *gur =
(void __iomem *)(CONFIG_SYS_FSL_GUTS_ADDR);
int i = 0, count = 0;
u32 cluster, type;
do {
int j;
cluster = gur_in32(&gur->tp_cluster[i].lower);
for (j = 0; j < TP_INIT_PER_CLUSTER; j++) {
type = initiator_type(cluster, j);
if (type) {
if (count == core)
return type;
count++;
}
}
i++;
} while ((cluster & TP_CLUSTER_EOC) == 0x0);
return -1; /* cannot identify the cluster */
}
#ifndef CONFIG_FSL_LSCH3
uint get_svr(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
return gur_in32(&gur->svr);
}
#endif
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
struct sys_info sysinfo;
char buf[32];
unsigned int i, core;
u32 type, rcw, svr = gur_in32(&gur->svr);
puts("SoC: ");
cpu_name(buf);
printf(" %s (0x%x)\n", buf, svr);
memset((u8 *)buf, 0x00, ARRAY_SIZE(buf));
get_sys_info(&sysinfo);
puts("Clock Configuration:");
for_each_cpu(i, core, cpu_numcores(), cpu_mask()) {
if (!(i % 3))
puts("\n ");
type = TP_ITYP_VER(fsl_qoriq_core_to_type(core));
printf("CPU%d(%s):%-4s MHz ", core,
type == TY_ITYP_VER_A7 ? "A7 " :
(type == TY_ITYP_VER_A53 ? "A53" :
(type == TY_ITYP_VER_A57 ? "A57" :
(type == TY_ITYP_VER_A72 ? "A72" : " "))),
strmhz(buf, sysinfo.freq_processor[core]));
}
/* Display platform clock as Bus frequency. */
printf("\n Bus: %-4s MHz ",
strmhz(buf, sysinfo.freq_systembus / CONFIG_SYS_FSL_PCLK_DIV));
printf("DDR: %-4s MT/s", strmhz(buf, sysinfo.freq_ddrbus));
#ifdef CONFIG_SYS_DPAA_FMAN
printf(" FMAN: %-4s MHz", strmhz(buf, sysinfo.freq_fman[0]));
#endif
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (soc_has_dp_ddr()) {
printf(" DP-DDR: %-4s MT/s",
strmhz(buf, sysinfo.freq_ddrbus2));
}
#endif
puts("\n");
/*
* Display the RCW, so that no one gets confused as to what RCW
* we're actually using for this boot.
*/
puts("Reset Configuration Word (RCW):");
for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
rcw = gur_in32(&gur->rcwsr[i]);
if ((i % 4) == 0)
printf("\n %08x:", i * 4);
printf(" %08x", rcw);
}
puts("\n");
return 0;
}
#endif
#ifdef CONFIG_FSL_ESDHC
int cpu_mmc_init(bd_t *bis)
{
return fsl_esdhc_mmc_init(bis);
}
#endif
int cpu_eth_init(bd_t *bis)
{
int error = 0;
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
error = fsl_mc_ldpaa_init(bis);
#endif
#ifdef CONFIG_FMAN_ENET
fm_standard_init(bis);
#endif
return error;
}
static inline int check_psci(void)
{
unsigned int psci_ver;
psci_ver = sec_firmware_support_psci_version();
if (psci_ver == PSCI_INVALID_VER)
return 1;
return 0;
}
static void config_core_prefetch(void)
{
char *buf = NULL;
char buffer[HWCONFIG_BUFFER_SIZE];
const char *prefetch_arg = NULL;
size_t arglen;
unsigned int mask;
struct pt_regs regs;
if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
prefetch_arg = hwconfig_subarg_f("core_prefetch", "disable",
&arglen, buf);
if (prefetch_arg) {
mask = simple_strtoul(prefetch_arg, NULL, 0) & 0xff;
if (mask & 0x1) {
printf("Core0 prefetch can't be disabled\n");
return;
}
#define SIP_PREFETCH_DISABLE_64 0xC200FF13
regs.regs[0] = SIP_PREFETCH_DISABLE_64;
regs.regs[1] = mask;
smc_call(&regs);
if (regs.regs[0])
printf("Prefetch disable config failed for mask ");
else
printf("Prefetch disable config passed for mask ");
printf("0x%x\n", mask);
}
}
int arch_early_init_r(void)
{
#ifdef CONFIG_SYS_FSL_ERRATUM_A009635
u32 svr_dev_id;
/*
* erratum A009635 is valid only for LS2080A SoC and
* its personalitiesi
*/
svr_dev_id = get_svr();
if (IS_SVR_DEV(svr_dev_id, SVR_DEV(SVR_LS2080A)))
erratum_a009635();
#endif
#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) && defined(CONFIG_SYS_FSL_DDR)
erratum_a009942_check_cpo();
#endif
if (check_psci()) {
debug("PSCI: PSCI does not exist.\n");
/* if PSCI does not exist, boot secondary cores here */
if (fsl_layerscape_wake_seconday_cores())
printf("Did not wake secondary cores\n");
}
#ifdef CONFIG_SYS_FSL_HAS_RGMII
fsl_rgmii_init();
#endif
config_core_prefetch();
#ifdef CONFIG_SYS_HAS_SERDES
fsl_serdes_init();
#endif
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_qbman_portals();
#endif
return 0;
}
int timer_init(void)
{
u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
#ifdef CONFIG_FSL_LSCH3
u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR;
#endif
#ifdef CONFIG_ARCH_LS2080A
u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET;
u32 svr_dev_id;
#endif
#ifdef COUNTER_FREQUENCY_REAL
unsigned long cntfrq = COUNTER_FREQUENCY_REAL;
/* Update with accurate clock frequency */
if (current_el() == 3)
asm volatile("msr cntfrq_el0, %0" : : "r" (cntfrq) : "memory");
#endif
#ifdef CONFIG_FSL_LSCH3
/* Enable timebase for all clusters.
* It is safe to do so even some clusters are not enabled.
*/
out_le32(cltbenr, 0xf);
#endif
#ifdef CONFIG_ARCH_LS2080A
/*
* In certain Layerscape SoCs, the clock for each core's
* has an enable bit in the PMU Physical Core Time Base Enable
* Register (PCTBENR), which allows the watchdog to operate.
*/
setbits_le32(pctbenr, 0xff);
/*
* For LS2080A SoC and its personalities, timer controller
* offset is different
*/
svr_dev_id = get_svr();
if (IS_SVR_DEV(svr_dev_id, SVR_DEV(SVR_LS2080A)))
cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR;
#endif
/* Enable clock for timer
* This is a global setting.
*/
out_le32(cntcr, 0x1);
return 0;
}
__efi_runtime_data u32 __iomem *rstcr = (u32 *)CONFIG_SYS_FSL_RST_ADDR;
void __efi_runtime reset_cpu(ulong addr)
{
u32 val;
/* Raise RESET_REQ_B */
val = scfg_in32(rstcr);
val |= 0x02;
scfg_out32(rstcr, val);
}
#ifdef CONFIG_EFI_LOADER
void __efi_runtime EFIAPI efi_reset_system(
enum efi_reset_type reset_type,
efi_status_t reset_status,
unsigned long data_size, void *reset_data)
{
switch (reset_type) {
case EFI_RESET_COLD:
case EFI_RESET_WARM:
reset_cpu(0);
break;
case EFI_RESET_SHUTDOWN:
/* Nothing we can do */
break;
}
while (1) { }
}
void efi_reset_system_init(void)
{
efi_add_runtime_mmio(&rstcr, sizeof(*rstcr));
}
#endif
/*
* Calculate reserved memory with given memory bank
* Return aligned memory size on success
* Return (ram_size + needed size) for failure
*/
phys_size_t board_reserve_ram_top(phys_size_t ram_size)
{
phys_size_t ram_top = ram_size;
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
ram_top = mc_get_dram_block_size();
if (ram_top > ram_size)
return ram_size + ram_top;
ram_top = ram_size - ram_top;
/* The start address of MC reserved memory needs to be aligned. */
ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
#endif
return ram_size - ram_top;
}
phys_size_t get_effective_memsize(void)
{
phys_size_t ea_size, rem = 0;
/*
* For ARMv8 SoCs, DDR memory is split into two or three regions. The
* first region is 2GB space at 0x8000_0000. Secure memory needs to
* allocated from first region. If the memory extends to the second
* region (or the third region if applicable), Management Complex (MC)
* memory should be put into the highest region, i.e. the end of DDR
* memory. CONFIG_MAX_MEM_MAPPED is set to the size of first region so
* U-Boot doesn't relocate itself into higher address. Should DDR be
* configured to skip the first region, this function needs to be
* adjusted.
*/
if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
ea_size = CONFIG_MAX_MEM_MAPPED;
rem = gd->ram_size - ea_size;
} else {
ea_size = gd->ram_size;
}
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
/* Check if we have enough space for secure memory */
if (ea_size > CONFIG_SYS_MEM_RESERVE_SECURE)
ea_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
else
printf("Error: No enough space for secure memory.\n");
#endif
/* Check if we have enough memory for MC */
if (rem < board_reserve_ram_top(rem)) {
/* Not enough memory in high region to reserve */
if (ea_size > board_reserve_ram_top(ea_size))
ea_size -= board_reserve_ram_top(ea_size);
else
printf("Error: No enough space for reserved memory.\n");
}
return ea_size;
}
int dram_init_banksize(void)
{
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
phys_size_t dp_ddr_size;
#endif
/*
* gd->ram_size has the total size of DDR memory, less reserved secure
* memory. The DDR extends from low region to high region(s) presuming
* no hole is created with DDR configuration. gd->arch.secure_ram tracks
* the location of secure memory. gd->arch.resv_ram tracks the location
* of reserved memory for Management Complex (MC). Because gd->ram_size
* is reduced by this function if secure memory is reserved, checking
* gd->arch.secure_ram should be done to avoid running it repeatedly.
*/
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->arch.secure_ram & MEM_RESERVE_SECURE_MAINTAINED) {
debug("No need to run again, skip %s\n", __func__);
return 0;
}
#endif
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
if (gd->ram_size > CONFIG_SYS_DDR_BLOCK1_SIZE) {
gd->bd->bi_dram[0].size = CONFIG_SYS_DDR_BLOCK1_SIZE;
gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE;
gd->bd->bi_dram[1].size = gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE;
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
if (gd->bi_dram[1].size > CONFIG_SYS_DDR_BLOCK2_SIZE) {
gd->bd->bi_dram[2].start = CONFIG_SYS_DDR_BLOCK3_BASE;
gd->bd->bi_dram[2].size = gd->bd->bi_dram[1].size -
CONFIG_SYS_DDR_BLOCK2_SIZE;
gd->bd->bi_dram[1].size = CONFIG_SYS_DDR_BLOCK2_SIZE;
}
#endif
} else {
gd->bd->bi_dram[0].size = gd->ram_size;
}
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
if (gd->bd->bi_dram[0].size >
CONFIG_SYS_MEM_RESERVE_SECURE) {
gd->bd->bi_dram[0].size -=
CONFIG_SYS_MEM_RESERVE_SECURE;
gd->arch.secure_ram = gd->bd->bi_dram[0].start +
gd->bd->bi_dram[0].size;
gd->arch.secure_ram |= MEM_RESERVE_SECURE_MAINTAINED;
gd->ram_size -= CONFIG_SYS_MEM_RESERVE_SECURE;
}
#endif /* CONFIG_SYS_MEM_RESERVE_SECURE */
#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* Assign memory for MC */
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
if (gd->bd->bi_dram[2].size >=
board_reserve_ram_top(gd->bd->bi_dram[2].size)) {
gd->arch.resv_ram = gd->bd->bi_dram[2].start +
gd->bd->bi_dram[2].size -
board_reserve_ram_top(gd->bd->bi_dram[2].size);
} else
#endif
{
if (gd->bd->bi_dram[1].size >=
board_reserve_ram_top(gd->bd->bi_dram[1].size)) {
gd->arch.resv_ram = gd->bd->bi_dram[1].start +
gd->bd->bi_dram[1].size -
board_reserve_ram_top(gd->bd->bi_dram[1].size);
} else if (gd->bd->bi_dram[0].size >
board_reserve_ram_top(gd->bd->bi_dram[0].size)) {
gd->arch.resv_ram = gd->bd->bi_dram[0].start +
gd->bd->bi_dram[0].size -
board_reserve_ram_top(gd->bd->bi_dram[0].size);
}
}
#endif /* CONFIG_FSL_MC_ENET */
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
#error "This SoC shouldn't have DP DDR"
#endif
if (soc_has_dp_ddr()) {
/* initialize DP-DDR here */
puts("DP-DDR: ");
/*
* DDR controller use 0 as the base address for binding.
* It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
*/
dp_ddr_size = fsl_other_ddr_sdram(CONFIG_SYS_DP_DDR_BASE_PHY,
CONFIG_DP_DDR_CTRL,
CONFIG_DP_DDR_NUM_CTRLS,
CONFIG_DP_DDR_DIMM_SLOTS_PER_CTLR,
NULL, NULL, NULL);
if (dp_ddr_size) {
gd->bd->bi_dram[2].start = CONFIG_SYS_DP_DDR_BASE;
gd->bd->bi_dram[2].size = dp_ddr_size;
} else {
puts("Not detected");
}
}
#endif
#ifdef CONFIG_SYS_MEM_RESERVE_SECURE
debug("%s is called. gd->ram_size is reduced to %lu\n",
__func__, (ulong)gd->ram_size);
#endif
return 0;
}
#if defined(CONFIG_EFI_LOADER) && !defined(CONFIG_SPL_BUILD)
void efi_add_known_memory(void)
{
int i;
phys_addr_t ram_start, start;
phys_size_t ram_size;
u64 pages;
/* Add RAM */
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
#ifdef CONFIG_SYS_DP_DDR_BASE_PHY
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
#error "This SoC shouldn't have DP DDR"
#endif
if (i == 2)
continue; /* skip DP-DDR */
#endif
ram_start = gd->bd->bi_dram[i].start;
ram_size = gd->bd->bi_dram[i].size;
#ifdef CONFIG_RESV_RAM
if (gd->arch.resv_ram >= ram_start &&
gd->arch.resv_ram < ram_start + ram_size)
ram_size = gd->arch.resv_ram - ram_start;
#endif
start = (ram_start + EFI_PAGE_MASK) & ~EFI_PAGE_MASK;
pages = (ram_size + EFI_PAGE_MASK) >> EFI_PAGE_SHIFT;
efi_add_memory_map(start, pages, EFI_CONVENTIONAL_MEMORY,
false);
}
}
#endif
/*
* Before DDR size is known, early MMU table have DDR mapped as device memory
* to avoid speculative access. To relocate U-Boot to DDR, "normal memory"
* needs to be set for these mappings.
* If a special case configures DDR with holes in the mapping, the holes need
* to be marked as invalid. This is not implemented in this function.
*/
void update_early_mmu_table(void)
{
if (!gd->arch.tlb_addr)
return;
if (gd->ram_size <= CONFIG_SYS_FSL_DRAM_SIZE1) {
mmu_change_region_attr(
CONFIG_SYS_SDRAM_BASE,
gd->ram_size,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE |
PTE_BLOCK_NS |
PTE_TYPE_VALID);
} else {
mmu_change_region_attr(
CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_DDR_BLOCK1_SIZE,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE |
PTE_BLOCK_NS |
PTE_TYPE_VALID);
#ifdef CONFIG_SYS_DDR_BLOCK3_BASE
#ifndef CONFIG_SYS_DDR_BLOCK2_SIZE
#error "Missing CONFIG_SYS_DDR_BLOCK2_SIZE"
#endif
if (gd->ram_size - CONFIG_SYS_DDR_BLOCK1_SIZE >
CONFIG_SYS_DDR_BLOCK2_SIZE) {
mmu_change_region_attr(
CONFIG_SYS_DDR_BLOCK2_BASE,
CONFIG_SYS_DDR_BLOCK2_SIZE,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE |
PTE_BLOCK_NS |
PTE_TYPE_VALID);
mmu_change_region_attr(
CONFIG_SYS_DDR_BLOCK3_BASE,
gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE -
CONFIG_SYS_DDR_BLOCK2_SIZE,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE |
PTE_BLOCK_NS |
PTE_TYPE_VALID);
} else
#endif
{
mmu_change_region_attr(
CONFIG_SYS_DDR_BLOCK2_BASE,
gd->ram_size -
CONFIG_SYS_DDR_BLOCK1_SIZE,
PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_OUTER_SHARE |
PTE_BLOCK_NS |
PTE_TYPE_VALID);
}
}
}
__weak int dram_init(void)
{
fsl_initdram();
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* This will break-before-make MMU for DDR */
update_early_mmu_table();
#endif
return 0;
}