u-boot/configs/harmony_defconfig
Tom Rini 86cf1c8285 configs: Migrate CONFIG_NR_DRAM_BANKS
We have the following cases:
- CONFIG_NR_DRAM_BANKS was defined, migrate normally
- CONFIG_NR_DRAM_BANKS_MAX was defined and then used for
  CONFIG_NR_DRAM_BANKS after a check, just migrate it over now.
- CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 +
  2), set this to 8.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-08-16 16:45:02 -04:00

52 lines
1.3 KiB
Text

CONFIG_ARM=y
CONFIG_TEGRA=y
CONFIG_SYS_TEXT_BASE=0x00110000
CONFIG_TEGRA20=y
CONFIG_TARGET_HARMONY=y
CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony"
CONFIG_NR_DRAM_BANKS=2
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SYS_PROMPT="Tegra20 (Harmony) # "
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_MTDIDS_DEFAULT="nand0=tegra_nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=tegra_nand:2m(u-boot)ro,1m(u-boot-env),1m(cfgblock)ro,-(ubi)"
CONFIG_CMD_UBI=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_OF_LIVE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SPL_DM=y
CONFIG_MTD=y
CONFIG_MTD_UBI_FASTMAP=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_DM_PMIC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_PWM_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_DM_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_TEGRA20=y
CONFIG_CONSOLE_SCROLL_LINES=10