mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
c62b74652a
Only two boards in the tree set the macro DWC_NET_PHYADDR. Both have
CONFIG_DM_ETH_PHY=y, so should set the phy address in DT if necessary.
The imx8mp_evk does set the correct address in device tree.
The other board seems to be a copy-paste-adapt from an old
version of the imx8mp_evk config header, given the "#ifdef
CONFIG_DWC_ETH_QOS" block that has been removed from imx8mp_evk header
in commit 127fb45495. Its device tree doesn't even enable (i.e., set
'status = "okay"') the &eqos node. But the other ethernet device,
&fec, does get enabled, and does have a phy sitting at address 4 (and
it also has a corresponding legacy #define CONFIG_FEC_MXC_PHYADDR
4). So I believe it should be completely safe to remove it from there
as well.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
[trini: Re-apply to top of tree, update imx93_evk.h]
Signed-off-by: Tom Rini <trini@konsulko.com>
144 lines
3.9 KiB
C
144 lines
3.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2022 NXP
|
|
*/
|
|
|
|
#ifndef __IMX93_EVK_H
|
|
#define __IMX93_EVK_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <linux/stringify.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN SZ_512K
|
|
#define CONFIG_SYS_UBOOT_BASE \
|
|
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CONFIG_MALLOC_F_ADDR 0x204D0000
|
|
#endif
|
|
|
|
#ifdef CONFIG_DISTRO_DEFAULTS
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 0) \
|
|
func(MMC, mmc, 1) \
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
#else
|
|
#define BOOTENV
|
|
#endif
|
|
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"scriptaddr=0x83500000\0" \
|
|
"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
|
|
"image=Image\0" \
|
|
"splashimage=0x90000000\0" \
|
|
"console=ttyLP0,115200 earlycon\0" \
|
|
"fdt_addr_r=0x83000000\0" \
|
|
"fdt_addr=0x83000000\0" \
|
|
"cntr_addr=0x98000000\0" \
|
|
"cntr_file=os_cntr_signed.bin\0" \
|
|
"boot_fit=no\0" \
|
|
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"bootm_size=0x10000000\0" \
|
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"mmcpart=1\0" \
|
|
"mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
|
|
"mmcautodetect=yes\0" \
|
|
"mmcargs=setenv bootargs ${jh_clk} console=${console} root=${mmcroot}\0 " \
|
|
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source\0" \
|
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
|
|
"loadcntr=fatload mmc ${mmcdev}:${mmcpart} ${cntr_addr} ${cntr_file}\0" \
|
|
"auth_os=auth_cntr ${cntr_addr}\0" \
|
|
"boot_os=booti ${loadaddr} - ${fdt_addr_r};\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"if run auth_os; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo ERR: failed to authenticate; " \
|
|
"fi; " \
|
|
"else " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if run loadfdt; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"netargs=setenv bootargs ${jh_clk} console=${console} " \
|
|
"root=/dev/nfs " \
|
|
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run netargs; " \
|
|
"if test ${ip_dyn} = yes; then " \
|
|
"setenv get_cmd dhcp; " \
|
|
"else " \
|
|
"setenv get_cmd tftp; " \
|
|
"fi; " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"${get_cmd} ${cntr_addr} ${cntr_file}; " \
|
|
"if run auth_os; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo ERR: failed to authenticate; " \
|
|
"fi; " \
|
|
"else " \
|
|
"${get_cmd} ${loadaddr} ${image}; " \
|
|
"if test ${boot_fit} = yes || test ${boot_fit} = try; then " \
|
|
"bootm ${loadaddr}; " \
|
|
"else " \
|
|
"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
|
|
"run boot_os; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi;" \
|
|
"fi;\0" \
|
|
"bsp_bootcmd=echo Running BSP bootcmd ...; " \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if test ${sec_boot} = yes; then " \
|
|
"if run loadcntr; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"else run netboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi;"
|
|
|
|
/* Link Definitions */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
|
#define PHYS_SDRAM 0x80000000
|
|
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
|
|
|
/* Using ULP WDOG for reset */
|
|
#define WDOG_BASE_ADDR WDG3_BASE_ADDR
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
#define PHY_ANEG_TIMEOUT 20000
|
|
#endif
|
|
|
|
#endif
|