u-boot/board/freescale/ls2080ardb/ddr.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

174 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <fsl_ddr_sdram.h>
#include <fsl_ddr_dimm_params.h>
#include <asm/arch/soc.h>
#include <asm/arch/clock.h>
#include "ddr.h"
DECLARE_GLOBAL_DATA_PTR;
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
u8 dq_mapping_0, dq_mapping_2, dq_mapping_3;
#endif
const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
ulong ddr_freq;
int slot;
if (ctrl_num > 2) {
printf("Not supported controller number %d\n", ctrl_num);
return;
}
for (slot = 0; slot < CONFIG_DIMM_SLOTS_PER_CTLR; slot++) {
if (pdimm[slot].n_ranks)
break;
}
if (slot >= CONFIG_DIMM_SLOTS_PER_CTLR)
return;
/*
* we use identical timing for all slots. If needed, change the code
* to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
*/
if (popts->registered_dimm_en)
pbsp = rdimms[ctrl_num];
else
pbsp = udimms[ctrl_num];
/* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
while (pbsp->datarate_mhz_high) {
if (pbsp->n_ranks == pdimm[slot].n_ranks &&
(pdimm[slot].rank_density >> 30) >= pbsp->rank_gb) {
if (ddr_freq <= pbsp->datarate_mhz_high) {
popts->clk_adjust = pbsp->clk_adjust;
popts->wrlvl_start = pbsp->wrlvl_start;
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
goto found;
}
pbsp_highest = pbsp;
}
pbsp++;
}
if (pbsp_highest) {
printf("Error: board specific timing not found for data rate %lu MT/s\n"
"Trying to use the highest speed (%u) parameters\n",
ddr_freq, pbsp_highest->datarate_mhz_high);
popts->clk_adjust = pbsp_highest->clk_adjust;
popts->wrlvl_start = pbsp_highest->wrlvl_start;
popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
} else {
panic("DIMM is not supported by this board");
}
found:
debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n"
"\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n",
pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb,
pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2,
pbsp->wrlvl_ctl_3);
#ifdef CONFIG_SYS_FSL_HAS_DP_DDR
if (ctrl_num == CONFIG_DP_DDR_CTRL) {
if (popts->registered_dimm_en)
printf("WARN: RDIMM not supported.\n");
/* force DDR bus width to 32 bits */
popts->data_bus_width = 1;
popts->otf_burst_chop_en = 0;
popts->burst_length = DDR_BL8;
popts->bstopre = 0; /* enable auto precharge */
/*
* Layout optimization results byte mapping
* Byte 0 -> Byte ECC
* Byte 1 -> Byte 3
* Byte 2 -> Byte 2
* Byte 3 -> Byte 1
* Byte ECC -> Byte 0
*/
dq_mapping_0 = pdimm[slot].dq_mapping[0];
dq_mapping_2 = pdimm[slot].dq_mapping[2];
dq_mapping_3 = pdimm[slot].dq_mapping[3];
pdimm[slot].dq_mapping[0] = pdimm[slot].dq_mapping[8];
pdimm[slot].dq_mapping[1] = pdimm[slot].dq_mapping[9];
pdimm[slot].dq_mapping[2] = pdimm[slot].dq_mapping[6];
pdimm[slot].dq_mapping[3] = pdimm[slot].dq_mapping[7];
pdimm[slot].dq_mapping[6] = dq_mapping_2;
pdimm[slot].dq_mapping[7] = dq_mapping_3;
pdimm[slot].dq_mapping[8] = dq_mapping_0;
pdimm[slot].dq_mapping[9] = 0;
pdimm[slot].dq_mapping[10] = 0;
pdimm[slot].dq_mapping[11] = 0;
pdimm[slot].dq_mapping[12] = 0;
pdimm[slot].dq_mapping[13] = 0;
pdimm[slot].dq_mapping[14] = 0;
pdimm[slot].dq_mapping[15] = 0;
pdimm[slot].dq_mapping[16] = 0;
pdimm[slot].dq_mapping[17] = 0;
}
#endif
/* To work at higher than 1333MT/s */
popts->half_strength_driver_enable = 0;
/*
* Write leveling override
*/
popts->wrlvl_override = 1;
popts->wrlvl_sample = 0x0; /* 32 clocks */
/*
* Rtt and Rtt_WR override
*/
popts->rtt_override = 0;
/* Enable ZQ calibration */
popts->zq_en = 1;
/* optimize cpo for erratum A-009942 */
popts->cpo_sample = 0x6e;
if (ddr_freq < 2350) {
if (pdimm[0].n_ranks == 2 && pdimm[1].n_ranks == 2) {
/* four chip-selects */
popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
DDR_CDR1_ODT(DDR_CDR_ODT_80ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm);
popts->twot_en = 1; /* enable 2T timing */
} else {
popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
DDR_CDR1_ODT(DDR_CDR_ODT_60ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_60ohm) |
DDR_CDR2_VREF_RANGE_2;
}
} else {
popts->ddr_cdr1 = DDR_CDR1_DHC_EN |
DDR_CDR1_ODT(DDR_CDR_ODT_100ohm);
popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_100ohm) |
DDR_CDR2_VREF_RANGE_2;
}
}
int fsl_initdram(void)
{
#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD)
gd->ram_size = fsl_ddr_sdram_size();
#else
puts("Initializing DDR....using SPD\n");
gd->ram_size = fsl_ddr_sdram();
#endif
return 0;
}