mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
497 lines
18 KiB
C
497 lines
18 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2006-2008
|
|
* Texas Instruments, <www.ti.com>
|
|
* Syed Mohammed Khasim <x0khasim@ti.com>
|
|
*/
|
|
#ifndef _MUX_H_
|
|
#define _MUX_H_
|
|
|
|
/*
|
|
* IEN - Input Enable
|
|
* IDIS - Input Disable
|
|
* PTD - Pull type Down
|
|
* PTU - Pull type Up
|
|
* DIS - Pull type selection is inactive
|
|
* EN - Pull type selection is active
|
|
* SB_LOW - Standby mode configuration: Output low-level
|
|
* SB_HI - Standby mode configuration: Output high-level
|
|
* SB_HIZ - Standby mode configuration: Output hi-impedence
|
|
* SB_PD - Standby mode pull-down enabled
|
|
* SB_PU - Standby mode pull-up enabled
|
|
* WKEN - Wakeup input enabled
|
|
* M0 - Mode 0
|
|
*/
|
|
|
|
#define IEN (1 << 8)
|
|
|
|
#define IDIS (0 << 8)
|
|
#define PTU (1 << 4)
|
|
#define PTD (0 << 4)
|
|
#define EN (1 << 3)
|
|
#define DIS (0 << 3)
|
|
|
|
#define SB_LOW (1 << 9)
|
|
#define SB_HI (5 << 9)
|
|
#define SB_HIZ (2 << 9)
|
|
#define SB_PD (1 << 12)
|
|
#define SB_PU (3 << 12)
|
|
#define WKEN (1 << 14)
|
|
|
|
#define M0 0
|
|
#define M1 1
|
|
#define M2 2
|
|
#define M3 3
|
|
#define M4 4
|
|
#define M5 5
|
|
#define M6 6
|
|
#define M7 7
|
|
|
|
/*
|
|
* To get the actual address the offset has to be added
|
|
* to OMAP34XX_CTRL_BASE
|
|
*/
|
|
|
|
/*SDRC*/
|
|
#define CONTROL_PADCONF_SDRC_D0 0x0030
|
|
#define CONTROL_PADCONF_SDRC_D1 0x0032
|
|
#define CONTROL_PADCONF_SDRC_D2 0x0034
|
|
#define CONTROL_PADCONF_SDRC_D3 0x0036
|
|
#define CONTROL_PADCONF_SDRC_D4 0x0038
|
|
#define CONTROL_PADCONF_SDRC_D5 0x003A
|
|
#define CONTROL_PADCONF_SDRC_D6 0x003C
|
|
#define CONTROL_PADCONF_SDRC_D7 0x003E
|
|
#define CONTROL_PADCONF_SDRC_D8 0x0040
|
|
#define CONTROL_PADCONF_SDRC_D9 0x0042
|
|
#define CONTROL_PADCONF_SDRC_D10 0x0044
|
|
#define CONTROL_PADCONF_SDRC_D11 0x0046
|
|
#define CONTROL_PADCONF_SDRC_D12 0x0048
|
|
#define CONTROL_PADCONF_SDRC_D13 0x004A
|
|
#define CONTROL_PADCONF_SDRC_D14 0x004C
|
|
#define CONTROL_PADCONF_SDRC_D15 0x004E
|
|
#define CONTROL_PADCONF_SDRC_D16 0x0050
|
|
#define CONTROL_PADCONF_SDRC_D17 0x0052
|
|
#define CONTROL_PADCONF_SDRC_D18 0x0054
|
|
#define CONTROL_PADCONF_SDRC_D19 0x0056
|
|
#define CONTROL_PADCONF_SDRC_D20 0x0058
|
|
#define CONTROL_PADCONF_SDRC_D21 0x005A
|
|
#define CONTROL_PADCONF_SDRC_D22 0x005C
|
|
#define CONTROL_PADCONF_SDRC_D23 0x005E
|
|
#define CONTROL_PADCONF_SDRC_D24 0x0060
|
|
#define CONTROL_PADCONF_SDRC_D25 0x0062
|
|
#define CONTROL_PADCONF_SDRC_D26 0x0064
|
|
#define CONTROL_PADCONF_SDRC_D27 0x0066
|
|
#define CONTROL_PADCONF_SDRC_D28 0x0068
|
|
#define CONTROL_PADCONF_SDRC_D29 0x006A
|
|
#define CONTROL_PADCONF_SDRC_D30 0x006C
|
|
#define CONTROL_PADCONF_SDRC_D31 0x006E
|
|
#define CONTROL_PADCONF_SDRC_CLK 0x0070
|
|
#define CONTROL_PADCONF_SDRC_DQS0 0x0072
|
|
#define CONTROL_PADCONF_SDRC_DQS1 0x0074
|
|
#define CONTROL_PADCONF_SDRC_DQS2 0x0076
|
|
#define CONTROL_PADCONF_SDRC_DQS3 0x0078
|
|
#define CONTROL_PADCONF_SDRC_BA0 0x05A0
|
|
#define CONTROL_PADCONF_SDRC_BA1 0x05A2
|
|
#define CONTROL_PADCONF_SDRC_A0 0x05A4
|
|
#define CONTROL_PADCONF_SDRC_A1 0x05A6
|
|
#define CONTROL_PADCONF_SDRC_A2 0x05A8
|
|
#define CONTROL_PADCONF_SDRC_A3 0x05AA
|
|
#define CONTROL_PADCONF_SDRC_A4 0x05AC
|
|
#define CONTROL_PADCONF_SDRC_A5 0x05AE
|
|
#define CONTROL_PADCONF_SDRC_A6 0x05B0
|
|
#define CONTROL_PADCONF_SDRC_A7 0x05B2
|
|
#define CONTROL_PADCONF_SDRC_A8 0x05B4
|
|
#define CONTROL_PADCONF_SDRC_A9 0x05B6
|
|
#define CONTROL_PADCONF_SDRC_A10 0x05B8
|
|
#define CONTROL_PADCONF_SDRC_A11 0x05BA
|
|
#define CONTROL_PADCONF_SDRC_A12 0x05BC
|
|
#define CONTROL_PADCONF_SDRC_A13 0x05BE
|
|
#define CONTROL_PADCONF_SDRC_A14 0x05C0
|
|
#define CONTROL_PADCONF_SDRC_NCS0 0x05C2
|
|
#define CONTROL_PADCONF_SDRC_NCS1 0x05C4
|
|
#define CONTROL_PADCONF_SDRC_NCLK 0x05C6
|
|
#define CONTROL_PADCONF_SDRC_NRAS 0x05C8
|
|
#define CONTROL_PADCONF_SDRC_NCAS 0x05CA
|
|
#define CONTROL_PADCONF_SDRC_NWE 0x05CC
|
|
#define CONTROL_PADCONF_SDRC_DM0 0x05CE
|
|
#define CONTROL_PADCONF_SDRC_DM1 0x05D0
|
|
#define CONTROL_PADCONF_SDRC_DM2 0x05D2
|
|
#define CONTROL_PADCONF_SDRC_DM3 0x05D4
|
|
/*GPMC*/
|
|
#define CONTROL_PADCONF_GPMC_A1 0x007A
|
|
#define CONTROL_PADCONF_GPMC_A2 0x007C
|
|
#define CONTROL_PADCONF_GPMC_A3 0x007E
|
|
#define CONTROL_PADCONF_GPMC_A4 0x0080
|
|
#define CONTROL_PADCONF_GPMC_A5 0x0082
|
|
#define CONTROL_PADCONF_GPMC_A6 0x0084
|
|
#define CONTROL_PADCONF_GPMC_A7 0x0086
|
|
#define CONTROL_PADCONF_GPMC_A8 0x0088
|
|
#define CONTROL_PADCONF_GPMC_A9 0x008A
|
|
#define CONTROL_PADCONF_GPMC_A10 0x008C
|
|
#define CONTROL_PADCONF_GPMC_A11 0x0264
|
|
#define CONTROL_PADCONF_GPMC_D0 0x008E
|
|
#define CONTROL_PADCONF_GPMC_D1 0x0090
|
|
#define CONTROL_PADCONF_GPMC_D2 0x0092
|
|
#define CONTROL_PADCONF_GPMC_D3 0x0094
|
|
#define CONTROL_PADCONF_GPMC_D4 0x0096
|
|
#define CONTROL_PADCONF_GPMC_D5 0x0098
|
|
#define CONTROL_PADCONF_GPMC_D6 0x009A
|
|
#define CONTROL_PADCONF_GPMC_D7 0x009C
|
|
#define CONTROL_PADCONF_GPMC_D8 0x009E
|
|
#define CONTROL_PADCONF_GPMC_D9 0x00A0
|
|
#define CONTROL_PADCONF_GPMC_D10 0x00A2
|
|
#define CONTROL_PADCONF_GPMC_D11 0x00A4
|
|
#define CONTROL_PADCONF_GPMC_D12 0x00A6
|
|
#define CONTROL_PADCONF_GPMC_D13 0x00A8
|
|
#define CONTROL_PADCONF_GPMC_D14 0x00AA
|
|
#define CONTROL_PADCONF_GPMC_D15 0x00AC
|
|
#define CONTROL_PADCONF_GPMC_NCS0 0x00AE
|
|
#define CONTROL_PADCONF_GPMC_NCS1 0x00B0
|
|
#define CONTROL_PADCONF_GPMC_NCS2 0x00B2
|
|
#define CONTROL_PADCONF_GPMC_NCS3 0x00B4
|
|
#define CONTROL_PADCONF_GPMC_NCS4 0x00B6
|
|
#define CONTROL_PADCONF_GPMC_NCS5 0x00B8
|
|
#define CONTROL_PADCONF_GPMC_NCS6 0x00BA
|
|
#define CONTROL_PADCONF_GPMC_NCS7 0x00BC
|
|
#define CONTROL_PADCONF_GPMC_CLK 0x00BE
|
|
#define CONTROL_PADCONF_GPMC_NADV_ALE 0x00C0
|
|
#define CONTROL_PADCONF_GPMC_NOE 0x00C2
|
|
#define CONTROL_PADCONF_GPMC_NWE 0x00C4
|
|
#define CONTROL_PADCONF_GPMC_NBE0_CLE 0x00C6
|
|
#define CONTROL_PADCONF_GPMC_NBE1 0x00C8
|
|
#define CONTROL_PADCONF_GPMC_NWP 0x00CA
|
|
#define CONTROL_PADCONF_GPMC_WAIT0 0x00CC
|
|
#define CONTROL_PADCONF_GPMC_WAIT1 0x00CE
|
|
#define CONTROL_PADCONF_GPMC_WAIT2 0x00D0
|
|
#define CONTROL_PADCONF_GPMC_WAIT3 0x00D2
|
|
/*DSS*/
|
|
#define CONTROL_PADCONF_DSS_PCLK 0x00D4
|
|
#define CONTROL_PADCONF_DSS_HSYNC 0x00D6
|
|
#define CONTROL_PADCONF_DSS_VSYNC 0x00D8
|
|
#define CONTROL_PADCONF_DSS_ACBIAS 0x00DA
|
|
#define CONTROL_PADCONF_DSS_DATA0 0x00DC
|
|
#define CONTROL_PADCONF_DSS_DATA1 0x00DE
|
|
#define CONTROL_PADCONF_DSS_DATA2 0x00E0
|
|
#define CONTROL_PADCONF_DSS_DATA3 0x00E2
|
|
#define CONTROL_PADCONF_DSS_DATA4 0x00E4
|
|
#define CONTROL_PADCONF_DSS_DATA5 0x00E6
|
|
#define CONTROL_PADCONF_DSS_DATA6 0x00E8
|
|
#define CONTROL_PADCONF_DSS_DATA7 0x00EA
|
|
#define CONTROL_PADCONF_DSS_DATA8 0x00EC
|
|
#define CONTROL_PADCONF_DSS_DATA9 0x00EE
|
|
#define CONTROL_PADCONF_DSS_DATA10 0x00F0
|
|
#define CONTROL_PADCONF_DSS_DATA11 0x00F2
|
|
#define CONTROL_PADCONF_DSS_DATA12 0x00F4
|
|
#define CONTROL_PADCONF_DSS_DATA13 0x00F6
|
|
#define CONTROL_PADCONF_DSS_DATA14 0x00F8
|
|
#define CONTROL_PADCONF_DSS_DATA15 0x00FA
|
|
#define CONTROL_PADCONF_DSS_DATA16 0x00FC
|
|
#define CONTROL_PADCONF_DSS_DATA17 0x00FE
|
|
#define CONTROL_PADCONF_DSS_DATA18 0x0100
|
|
#define CONTROL_PADCONF_DSS_DATA19 0x0102
|
|
#define CONTROL_PADCONF_DSS_DATA20 0x0104
|
|
#define CONTROL_PADCONF_DSS_DATA21 0x0106
|
|
#define CONTROL_PADCONF_DSS_DATA22 0x0108
|
|
#define CONTROL_PADCONF_DSS_DATA23 0x010A
|
|
/*CAMERA*/
|
|
#define CONTROL_PADCONF_CAM_HS 0x010C
|
|
#define CONTROL_PADCONF_CAM_VS 0x010E
|
|
#define CONTROL_PADCONF_CAM_XCLKA 0x0110
|
|
#define CONTROL_PADCONF_CAM_PCLK 0x0112
|
|
#define CONTROL_PADCONF_CAM_FLD 0x0114
|
|
#define CONTROL_PADCONF_CAM_D0 0x0116
|
|
#define CONTROL_PADCONF_CAM_D1 0x0118
|
|
#define CONTROL_PADCONF_CAM_D2 0x011A
|
|
#define CONTROL_PADCONF_CAM_D3 0x011C
|
|
#define CONTROL_PADCONF_CAM_D4 0x011E
|
|
#define CONTROL_PADCONF_CAM_D5 0x0120
|
|
#define CONTROL_PADCONF_CAM_D6 0x0122
|
|
#define CONTROL_PADCONF_CAM_D7 0x0124
|
|
#define CONTROL_PADCONF_CAM_D8 0x0126
|
|
#define CONTROL_PADCONF_CAM_D9 0x0128
|
|
#define CONTROL_PADCONF_CAM_D10 0x012A
|
|
#define CONTROL_PADCONF_CAM_D11 0x012C
|
|
#define CONTROL_PADCONF_CAM_XCLKB 0x012E
|
|
#define CONTROL_PADCONF_CAM_WEN 0x0130
|
|
#define CONTROL_PADCONF_CAM_STROBE 0x0132
|
|
#define CONTROL_PADCONF_CSI2_DX0 0x0134
|
|
#define CONTROL_PADCONF_CSI2_DY0 0x0136
|
|
#define CONTROL_PADCONF_CSI2_DX1 0x0138
|
|
#define CONTROL_PADCONF_CSI2_DY1 0x013A
|
|
/*Audio Interface */
|
|
#define CONTROL_PADCONF_MCBSP2_FSX 0x013C
|
|
#define CONTROL_PADCONF_MCBSP2_CLKX 0x013E
|
|
#define CONTROL_PADCONF_MCBSP2_DR 0x0140
|
|
#define CONTROL_PADCONF_MCBSP2_DX 0x0142
|
|
#define CONTROL_PADCONF_MMC1_CLK 0x0144
|
|
#define CONTROL_PADCONF_MMC1_CMD 0x0146
|
|
#define CONTROL_PADCONF_MMC1_DAT0 0x0148
|
|
#define CONTROL_PADCONF_MMC1_DAT1 0x014A
|
|
#define CONTROL_PADCONF_MMC1_DAT2 0x014C
|
|
#define CONTROL_PADCONF_MMC1_DAT3 0x014E
|
|
#define CONTROL_PADCONF_MMC1_DAT4 0x0150
|
|
#define CONTROL_PADCONF_MMC1_DAT5 0x0152
|
|
#define CONTROL_PADCONF_MMC1_DAT6 0x0154
|
|
#define CONTROL_PADCONF_MMC1_DAT7 0x0156
|
|
/*Wireless LAN */
|
|
#define CONTROL_PADCONF_MMC2_CLK 0x0158
|
|
#define CONTROL_PADCONF_MMC2_CMD 0x015A
|
|
#define CONTROL_PADCONF_MMC2_DAT0 0x015C
|
|
#define CONTROL_PADCONF_MMC2_DAT1 0x015E
|
|
#define CONTROL_PADCONF_MMC2_DAT2 0x0160
|
|
#define CONTROL_PADCONF_MMC2_DAT3 0x0162
|
|
#define CONTROL_PADCONF_MMC2_DAT4 0x0164
|
|
#define CONTROL_PADCONF_MMC2_DAT5 0x0166
|
|
#define CONTROL_PADCONF_MMC2_DAT6 0x0168
|
|
#define CONTROL_PADCONF_MMC2_DAT7 0x016A
|
|
/*Bluetooth*/
|
|
#define CONTROL_PADCONF_MCBSP3_DX 0x016C
|
|
#define CONTROL_PADCONF_MCBSP3_DR 0x016E
|
|
#define CONTROL_PADCONF_MCBSP3_CLKX 0x0170
|
|
#define CONTROL_PADCONF_MCBSP3_FSX 0x0172
|
|
#define CONTROL_PADCONF_UART2_CTS 0x0174
|
|
#define CONTROL_PADCONF_UART2_RTS 0x0176
|
|
#define CONTROL_PADCONF_UART2_TX 0x0178
|
|
#define CONTROL_PADCONF_UART2_RX 0x017A
|
|
/*Modem Interface */
|
|
#define CONTROL_PADCONF_UART1_TX 0x017C
|
|
#define CONTROL_PADCONF_UART1_RTS 0x017E
|
|
#define CONTROL_PADCONF_UART1_CTS 0x0180
|
|
#define CONTROL_PADCONF_UART1_RX 0x0182
|
|
#define CONTROL_PADCONF_MCBSP4_CLKX 0x0184
|
|
#define CONTROL_PADCONF_MCBSP4_DR 0x0186
|
|
#define CONTROL_PADCONF_MCBSP4_DX 0x0188
|
|
#define CONTROL_PADCONF_MCBSP4_FSX 0x018A
|
|
#define CONTROL_PADCONF_MCBSP1_CLKR 0x018C
|
|
#define CONTROL_PADCONF_MCBSP1_FSR 0x018E
|
|
#define CONTROL_PADCONF_MCBSP1_DX 0x0190
|
|
#define CONTROL_PADCONF_MCBSP1_DR 0x0192
|
|
#define CONTROL_PADCONF_MCBSP_CLKS 0x0194
|
|
#define CONTROL_PADCONF_MCBSP1_FSX 0x0196
|
|
#define CONTROL_PADCONF_MCBSP1_CLKX 0x0198
|
|
/*Serial Interface*/
|
|
#define CONTROL_PADCONF_UART3_CTS_RCTX 0x019A
|
|
#define CONTROL_PADCONF_UART3_RTS_SD 0x019C
|
|
#define CONTROL_PADCONF_UART3_RX_IRRX 0x019E
|
|
#define CONTROL_PADCONF_UART3_TX_IRTX 0x01A0
|
|
#define CONTROL_PADCONF_HSUSB0_CLK 0x01A2
|
|
#define CONTROL_PADCONF_HSUSB0_STP 0x01A4
|
|
#define CONTROL_PADCONF_HSUSB0_DIR 0x01A6
|
|
#define CONTROL_PADCONF_HSUSB0_NXT 0x01A8
|
|
#define CONTROL_PADCONF_HSUSB0_DATA0 0x01AA
|
|
#define CONTROL_PADCONF_HSUSB0_DATA1 0x01AC
|
|
#define CONTROL_PADCONF_HSUSB0_DATA2 0x01AE
|
|
#define CONTROL_PADCONF_HSUSB0_DATA3 0x01B0
|
|
#define CONTROL_PADCONF_HSUSB0_DATA4 0x01B2
|
|
#define CONTROL_PADCONF_HSUSB0_DATA5 0x01B4
|
|
#define CONTROL_PADCONF_HSUSB0_DATA6 0x01B6
|
|
#define CONTROL_PADCONF_HSUSB0_DATA7 0x01B8
|
|
#define CONTROL_PADCONF_I2C1_SCL 0x01BA
|
|
#define CONTROL_PADCONF_I2C1_SDA 0x01BC
|
|
#define CONTROL_PADCONF_I2C2_SCL 0x01BE
|
|
#define CONTROL_PADCONF_I2C2_SDA 0x01C0
|
|
#define CONTROL_PADCONF_I2C3_SCL 0x01C2
|
|
#define CONTROL_PADCONF_I2C3_SDA 0x01C4
|
|
#define CONTROL_PADCONF_I2C4_SCL 0x0A00
|
|
#define CONTROL_PADCONF_I2C4_SDA 0x0A02
|
|
#define CONTROL_PADCONF_HDQ_SIO 0x01C6
|
|
#define CONTROL_PADCONF_MCSPI1_CLK 0x01C8
|
|
#define CONTROL_PADCONF_MCSPI1_SIMO 0x01CA
|
|
#define CONTROL_PADCONF_MCSPI1_SOMI 0x01CC
|
|
#define CONTROL_PADCONF_MCSPI1_CS0 0x01CE
|
|
#define CONTROL_PADCONF_MCSPI1_CS1 0x01D0
|
|
#define CONTROL_PADCONF_MCSPI1_CS2 0x01D2
|
|
#define CONTROL_PADCONF_MCSPI1_CS3 0x01D4
|
|
#define CONTROL_PADCONF_MCSPI2_CLK 0x01D6
|
|
#define CONTROL_PADCONF_MCSPI2_SIMO 0x01D8
|
|
#define CONTROL_PADCONF_MCSPI2_SOMI 0x01DA
|
|
#define CONTROL_PADCONF_MCSPI2_CS0 0x01DC
|
|
#define CONTROL_PADCONF_MCSPI2_CS1 0x01DE
|
|
/*Control and debug */
|
|
#define CONTROL_PADCONF_SYS_32K 0x0A04
|
|
#define CONTROL_PADCONF_SYS_CLKREQ 0x0A06
|
|
#define CONTROL_PADCONF_SYS_NIRQ 0x01E0
|
|
#define CONTROL_PADCONF_SYS_BOOT0 0x0A0A
|
|
#define CONTROL_PADCONF_SYS_BOOT1 0x0A0C
|
|
#define CONTROL_PADCONF_SYS_BOOT2 0x0A0E
|
|
#define CONTROL_PADCONF_SYS_BOOT3 0x0A10
|
|
#define CONTROL_PADCONF_SYS_BOOT4 0x0A12
|
|
#define CONTROL_PADCONF_SYS_BOOT5 0x0A14
|
|
#define CONTROL_PADCONF_SYS_BOOT6 0x0A16
|
|
#define CONTROL_PADCONF_SYS_OFF_MODE 0x0A18
|
|
#define CONTROL_PADCONF_SYS_CLKOUT1 0x0A1A
|
|
#define CONTROL_PADCONF_SYS_CLKOUT2 0x01E2
|
|
#define CONTROL_PADCONF_JTAG_NTRST 0x0A1C
|
|
#define CONTROL_PADCONF_JTAG_TCK 0x0A1E
|
|
#define CONTROL_PADCONF_JTAG_TMS 0x0A20
|
|
#define CONTROL_PADCONF_JTAG_TDI 0x0A22
|
|
#define CONTROL_PADCONF_JTAG_EMU0 0x0A24
|
|
#define CONTROL_PADCONF_JTAG_EMU1 0x0A26
|
|
#define CONTROL_PADCONF_ETK_CLK 0x0A28
|
|
#define CONTROL_PADCONF_ETK_CTL 0x0A2A
|
|
#define CONTROL_PADCONF_ETK_D0 0x0A2C
|
|
#define CONTROL_PADCONF_ETK_D1 0x0A2E
|
|
#define CONTROL_PADCONF_ETK_D2 0x0A30
|
|
#define CONTROL_PADCONF_ETK_D3 0x0A32
|
|
#define CONTROL_PADCONF_ETK_D4 0x0A34
|
|
#define CONTROL_PADCONF_ETK_D5 0x0A36
|
|
#define CONTROL_PADCONF_ETK_D6 0x0A38
|
|
#define CONTROL_PADCONF_ETK_D7 0x0A3A
|
|
#define CONTROL_PADCONF_ETK_D8 0x0A3C
|
|
#define CONTROL_PADCONF_ETK_D9 0x0A3E
|
|
#define CONTROL_PADCONF_ETK_D10 0x0A40
|
|
#define CONTROL_PADCONF_ETK_D11 0x0A42
|
|
#define CONTROL_PADCONF_ETK_D12 0x0A44
|
|
#define CONTROL_PADCONF_ETK_D13 0x0A46
|
|
#define CONTROL_PADCONF_ETK_D14 0x0A48
|
|
#define CONTROL_PADCONF_ETK_D15 0x0A4A
|
|
#define CONTROL_PADCONF_ETK_CLK_ES2 0x05D8
|
|
#define CONTROL_PADCONF_ETK_CTL_ES2 0x05DA
|
|
#define CONTROL_PADCONF_ETK_D0_ES2 0x05DC
|
|
#define CONTROL_PADCONF_ETK_D1_ES2 0x05DE
|
|
#define CONTROL_PADCONF_ETK_D2_ES2 0x05E0
|
|
#define CONTROL_PADCONF_ETK_D3_ES2 0x05E2
|
|
#define CONTROL_PADCONF_ETK_D4_ES2 0x05E4
|
|
#define CONTROL_PADCONF_ETK_D5_ES2 0x05E6
|
|
#define CONTROL_PADCONF_ETK_D6_ES2 0x05E8
|
|
#define CONTROL_PADCONF_ETK_D7_ES2 0x05EA
|
|
#define CONTROL_PADCONF_ETK_D8_ES2 0x05EC
|
|
#define CONTROL_PADCONF_ETK_D9_ES2 0x05EE
|
|
#define CONTROL_PADCONF_ETK_D10_ES2 0x05F0
|
|
#define CONTROL_PADCONF_ETK_D11_ES2 0x05F2
|
|
#define CONTROL_PADCONF_ETK_D12_ES2 0x05F4
|
|
#define CONTROL_PADCONF_ETK_D13_ES2 0x05F6
|
|
#define CONTROL_PADCONF_ETK_D14_ES2 0x05F8
|
|
#define CONTROL_PADCONF_ETK_D15_ES2 0x05FA
|
|
#define CONTROL_PADCONF_JTAG_RTCK 0x0A4E
|
|
#define CONTROL_PADCONF_JTAG_TDO 0x0A50
|
|
/*Die to Die */
|
|
#define CONTROL_PADCONF_D2D_MCAD0 0x01E4
|
|
#define CONTROL_PADCONF_D2D_MCAD1 0x01E6
|
|
#define CONTROL_PADCONF_D2D_MCAD2 0x01E8
|
|
#define CONTROL_PADCONF_D2D_MCAD3 0x01EA
|
|
#define CONTROL_PADCONF_D2D_MCAD4 0x01EC
|
|
#define CONTROL_PADCONF_D2D_MCAD5 0x01EE
|
|
#define CONTROL_PADCONF_D2D_MCAD6 0x01F0
|
|
#define CONTROL_PADCONF_D2D_MCAD7 0x01F2
|
|
#define CONTROL_PADCONF_D2D_MCAD8 0x01F4
|
|
#define CONTROL_PADCONF_D2D_MCAD9 0x01F6
|
|
#define CONTROL_PADCONF_D2D_MCAD10 0x01F8
|
|
#define CONTROL_PADCONF_D2D_MCAD11 0x01FA
|
|
#define CONTROL_PADCONF_D2D_MCAD12 0x01FC
|
|
#define CONTROL_PADCONF_D2D_MCAD13 0x01FE
|
|
#define CONTROL_PADCONF_D2D_MCAD14 0x0200
|
|
#define CONTROL_PADCONF_D2D_MCAD15 0x0202
|
|
#define CONTROL_PADCONF_D2D_MCAD16 0x0204
|
|
#define CONTROL_PADCONF_D2D_MCAD17 0x0206
|
|
#define CONTROL_PADCONF_D2D_MCAD18 0x0208
|
|
#define CONTROL_PADCONF_D2D_MCAD19 0x020A
|
|
#define CONTROL_PADCONF_D2D_MCAD20 0x020C
|
|
#define CONTROL_PADCONF_D2D_MCAD21 0x020E
|
|
#define CONTROL_PADCONF_D2D_MCAD22 0x0210
|
|
#define CONTROL_PADCONF_D2D_MCAD23 0x0212
|
|
#define CONTROL_PADCONF_D2D_MCAD24 0x0214
|
|
#define CONTROL_PADCONF_D2D_MCAD25 0x0216
|
|
#define CONTROL_PADCONF_D2D_MCAD26 0x0218
|
|
#define CONTROL_PADCONF_D2D_MCAD27 0x021A
|
|
#define CONTROL_PADCONF_D2D_MCAD28 0x021C
|
|
#define CONTROL_PADCONF_D2D_MCAD29 0x021E
|
|
#define CONTROL_PADCONF_D2D_MCAD30 0x0220
|
|
#define CONTROL_PADCONF_D2D_MCAD31 0x0222
|
|
#define CONTROL_PADCONF_D2D_MCAD32 0x0224
|
|
#define CONTROL_PADCONF_D2D_MCAD33 0x0226
|
|
#define CONTROL_PADCONF_D2D_MCAD34 0x0228
|
|
#define CONTROL_PADCONF_D2D_MCAD35 0x022A
|
|
#define CONTROL_PADCONF_D2D_MCAD36 0x022C
|
|
#define CONTROL_PADCONF_D2D_CLK26MI 0x022E
|
|
#define CONTROL_PADCONF_D2D_NRESPWRON 0x0230
|
|
#define CONTROL_PADCONF_D2D_NRESWARM 0x0232
|
|
#define CONTROL_PADCONF_D2D_ARM9NIRQ 0x0234
|
|
#define CONTROL_PADCONF_D2D_UMA2P6FIQ 0x0236
|
|
#define CONTROL_PADCONF_D2D_SPINT 0x0238
|
|
#define CONTROL_PADCONF_D2D_FRINT 0x023A
|
|
#define CONTROL_PADCONF_D2D_DMAREQ0 0x023C
|
|
#define CONTROL_PADCONF_D2D_DMAREQ1 0x023E
|
|
#define CONTROL_PADCONF_D2D_DMAREQ2 0x0240
|
|
#define CONTROL_PADCONF_D2D_DMAREQ3 0x0242
|
|
#define CONTROL_PADCONF_D2D_N3GTRST 0x0244
|
|
#define CONTROL_PADCONF_D2D_N3GTDI 0x0246
|
|
#define CONTROL_PADCONF_D2D_N3GTDO 0x0248
|
|
#define CONTROL_PADCONF_D2D_N3GTMS 0x024A
|
|
#define CONTROL_PADCONF_D2D_N3GTCK 0x024C
|
|
#define CONTROL_PADCONF_D2D_N3GRTCK 0x024E
|
|
#define CONTROL_PADCONF_D2D_MSTDBY 0x0250
|
|
#define CONTROL_PADCONF_D2D_SWAKEUP 0x0A4C
|
|
#define CONTROL_PADCONF_D2D_IDLEREQ 0x0252
|
|
#define CONTROL_PADCONF_D2D_IDLEACK 0x0254
|
|
#define CONTROL_PADCONF_D2D_MWRITE 0x0256
|
|
#define CONTROL_PADCONF_D2D_SWRITE 0x0258
|
|
#define CONTROL_PADCONF_D2D_MREAD 0x025A
|
|
#define CONTROL_PADCONF_D2D_SREAD 0x025C
|
|
#define CONTROL_PADCONF_D2D_MBUSFLAG 0x025E
|
|
#define CONTROL_PADCONF_D2D_SBUSFLAG 0x0260
|
|
#define CONTROL_PADCONF_SDRC_CKE0 0x0262
|
|
#define CONTROL_PADCONF_SDRC_CKE1 0x0264
|
|
|
|
/* AM3517 specific mux configuration */
|
|
#define CONTROL_PADCONF_SYS_NRESWARM 0x0A08
|
|
/* CCDC */
|
|
#define CONTROL_PADCONF_CCDC_PCLK 0x01E4
|
|
#define CONTROL_PADCONF_CCDC_FIELD 0x01E6
|
|
#define CONTROL_PADCONF_CCDC_HD 0x01E8
|
|
#define CONTROL_PADCONF_CCDC_VD 0x01EA
|
|
#define CONTROL_PADCONF_CCDC_WEN 0x01EC
|
|
#define CONTROL_PADCONF_CCDC_DATA0 0x01EE
|
|
#define CONTROL_PADCONF_CCDC_DATA1 0x01F0
|
|
#define CONTROL_PADCONF_CCDC_DATA2 0x01F2
|
|
#define CONTROL_PADCONF_CCDC_DATA3 0x01F4
|
|
#define CONTROL_PADCONF_CCDC_DATA4 0x01F6
|
|
#define CONTROL_PADCONF_CCDC_DATA5 0x01F8
|
|
#define CONTROL_PADCONF_CCDC_DATA6 0x01FA
|
|
#define CONTROL_PADCONF_CCDC_DATA7 0x01FC
|
|
/* RMII */
|
|
#define CONTROL_PADCONF_RMII_MDIO_DATA 0x01FE
|
|
#define CONTROL_PADCONF_RMII_MDIO_CLK 0x0200
|
|
#define CONTROL_PADCONF_RMII_RXD0 0x0202
|
|
#define CONTROL_PADCONF_RMII_RXD1 0x0204
|
|
#define CONTROL_PADCONF_RMII_CRS_DV 0x0206
|
|
#define CONTROL_PADCONF_RMII_RXER 0x0208
|
|
#define CONTROL_PADCONF_RMII_TXD0 0x020A
|
|
#define CONTROL_PADCONF_RMII_TXD1 0x020C
|
|
#define CONTROL_PADCONF_RMII_TXEN 0x020E
|
|
#define CONTROL_PADCONF_RMII_50MHZ_CLK 0x0210
|
|
#define CONTROL_PADCONF_USB0_DRVBUS 0x0212
|
|
/* CAN */
|
|
#define CONTROL_PADCONF_HECC1_TXD 0x0214
|
|
#define CONTROL_PADCONF_HECC1_RXD 0x0216
|
|
|
|
#define CONTROL_PADCONF_SYS_BOOT7 0x0218
|
|
#define CONTROL_PADCONF_SDRC_DQS0N 0x021A
|
|
#define CONTROL_PADCONF_SDRC_DQS1N 0x021C
|
|
#define CONTROL_PADCONF_SDRC_DQS2N 0x021E
|
|
#define CONTROL_PADCONF_SDRC_DQS3N 0x0220
|
|
#define CONTROL_PADCONF_STRBEN_DLY0 0x0222
|
|
#define CONTROL_PADCONF_STRBEN_DLY1 0x0224
|
|
#define CONTROL_PADCONF_SYS_BOOT8 0x0226
|
|
|
|
/* AM/DM37xx specific */
|
|
#define CONTROL_PADCONF_GPIO112 0x0134
|
|
#define CONTROL_PADCONF_GPIO113 0x0136
|
|
#define CONTROL_PADCONF_GPIO114 0x0138
|
|
#define CONTROL_PADCONF_GPIO115 0x013A
|
|
#define CONTROL_PADCONF_GPIO127 0x0A54
|
|
#define CONTROL_PADCONF_GPIO126 0x0A56
|
|
#define CONTROL_PADCONF_GPIO128 0x0A58
|
|
#define CONTROL_PADCONF_GPIO129 0x0A5A
|
|
|
|
/* AM/DM37xx specific: gpio_127, gpio_127 and gpio_129 require configuration
|
|
* of the extended drain cells */
|
|
#define OMAP34XX_CTRL_WKUP_CTRL (OMAP34XX_CTRL_BASE + 0x0A5C)
|
|
#define OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ (1<<6)
|
|
|
|
#define MUX_VAL(OFFSET, VALUE)\
|
|
writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
|
|
|
|
#define CP(x) (CONTROL_PADCONF_##x)
|
|
|
|
#endif
|